2.2.2 ADI Community version hangs on boot - Netgate 4860-1U
-
When I run the memstick everything seems fine initially. After I press 1 at the beginning menu, I receive the following output but then it remains here indefinitely.
/boot/kernel/kernel text=0x1223eb0 data=0x881ab0+0x3576a0 syms=[0x8+0x16f050+0x8
+0x16c491]
Booting…
/I have been able to successfully use this exact same memstick to install on a hard drive in a laptop as a test, so I know that it is a good install. I'm assuming there may be a few commands I need to make changes to in order for this to install, but I don't know where to go from here. Any suggestions? Thanks in advance. I would've purchased a PFSense firewall directly (would've been my first choice) but they are on backorder for at least another month and I really need to get this firewall going.
-
2.2.2? That a typo and you meant 2.2.5? If not, start with 2.2.5.
If you used that memstick to install using a laptop, it's likely not the ADI memstick, as you wouldn't have had a VGA console, only serial on COM2. Guessing you have the regular memstick, as where it stops outputting is where the VGA memstick (or non-ADI serial one) will stop outputting.
The 4860-1U isn't on backorder at store.pfsense.org, btw. Only the desktop version is out of stock right now. But what you have will work fine.