Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    SG-1100 SpeedTest Capped ~300 Mbps

    Scheduled Pinned Locked Moved Official Netgate® Hardware
    2 Posts 2 Posters 1.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • tnufireT
      tnufire
      last edited by

      Hello,

      Newbie question.... I'm not seeing the throughput I expected from my new SG-1100 and am wondering if I need to exchange it for the more powerful (and expensive) SG-3100.

      My connection to the internet is via an Xfinity cable modem promising 600/15 (measured at 716/17). With my new SG-1100 in the network path I only get 331/18. From the following specs on NetGate's site I thought I would get at least 600 Mbps on a SpeedTest since that should be closer to IPERF3 than IMIX and my firewall/NAT only have default rules..

      IPERF3 TRAFFIC
      L3 Forwarding: 880 Mbps
      Firewall: 656 Mbps
      (10k ACLs)
      IPsec VPN: 74.2 Mbps
      (AES-128-CBC + SHA1)

      IMIX TRAFFIC
      L3 Forwarding: 480 Mbps
      Firewall: 190 Mbps
      (10k ACLs)
      IPsec VPN: 46 Mbps
      (AES-128-CBC + SHA1)

      My setup is a very simple 'out of the box' config on 2.4.5-RELEASE-p1 (arm64):

      LAN: Macbook Pro connected directly LAN port on SG-1100 with NAT & firewall enabled but only using default rules

      WAN: Connected to LAN port on Google Wifi through a dumb switch

      The Google Wifi is also configured with NAT and it's WAN port is connected to my cable modem (an ARRIS SB 8200). This means I'm double NATed. Here's are the interfaces on my SG-1100:

      8606ee1e-a2bd-49a6-b533-550b546bbedf-image.png

      Here's the speed test results going through the SG-1100:
      d97a4210-e408-4226-88bf-08123f9b061c-image.png
      47006119-e899-4581-b4a8-8970c4e1647e-image.png

      Here's what I see if I connect my Macbook directly to the Google Wifi (removing the SG-1100 from the path but not making any other changes):
      d73f7237-63d7-442e-b7b5-05ad97e296c2-image.png
      Am I doing something wrong in the way I setup my SG-1100 or do I just need more powerful hardware? Will the SG-3100 be enough to support near Gbps downloads? I got the SG-1100 so I could connect to two ISPs (dual WAN, Xfinity Cable and MonkeyBrains line of sight wireless). I will never use the VPN or complicated firewall rules so I was hoping the SG-1100 would be enough... Happy to upgrade if that's the right answer.

      Thanks in advance for your help :-)

      Tim

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        The SG-1100 can usually pass 450-500Mbps so there may be some optimising to do there. It won't pass 716Mbps though.
        The SG-3100 can pass traffic at or very close to Gigabit line rate (941Mbps) so should be fine there.

        There are always variables here, precise numbers are hard to give.

        Steve

        1 Reply Last reply Reply Quote 1
        • First post
          Last post
        Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.