Installing OpenBSD on XG-7100
-
You are seeing exactly the same output?
It still looks like it's trying to use the VGA console to me.
Steve
-
Yes, but eMMc is not mentioned:
OpenBSD 6.7 (RAMDISK_CD) #177: Thu May 7 11:19:02 MDT 2020 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 8562393088 (8165MB) avail mem = 8298868736 (7914MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7f6d7020 (7 entries) bios0: vendor coreboot version "ADI_PLCC-01.00.00.11" date 01/08/2019 bios0: Silicom, Ltd. 80300-0134-g01 acpi0 at bios0: ACPI 3.0 acpi0: tables DSDT FACP SSDT MCFG TCPA APIC DMAR acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 4 (boot processor) cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2195.39 MHz, 06-5f-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu0: 2MB 64b/line 16-way L2 cache cpu0: cannot disable silicon debug cpu0: apic clock running at 25MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus -1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus 2 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiprt7 at acpi0: bus 3 (RP07) acpiprt8 at acpi0: bus 4 (RP08) acpicpu at acpi0 not configured "PNP0C0C" at acpi0 not configured "PNP0A08" at acpi0 not configured "PNP0003" at acpi0 not configured acpicmos0 at acpi0 "INTC3000" at acpi0 not configured "BOOT0000" at acpi0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel C3000 Host" rev 0x11 pchb1 at pci0 dev 4 function 0 "Intel C3000 GLREG" rev 0x11 "Intel C3000 RCEC" rev 0x11 at pci0 dev 5 function 0 not configured ppb0 at pci0 dev 6 function 0 "Intel C3000 PCIE" rev 0x11 pci1 at ppb0 bus 1 "Intel C3000 QAT" rev 0x11 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 14 function 0 "Intel C3000 PCIE" rev 0x11 pci2 at ppb1 bus 2 ppb2 at pci0 dev 16 function 0 "Intel C3000 PCIE" rev 0x11 pci3 at ppb2 bus 3 ppb3 at pci0 dev 17 function 0 "Intel C3000 PCIE" rev 0x11 pci4 at ppb3 bus 4 "Intel C3000 SMBus" rev 0x11 at pci0 dev 18 function 0 not configured ahci0 at pci0 dev 20 function 0 "Intel C3000 AHCI" rev 0x11: msi, AHCI 1.3.1 scsibus0 at ahci0: 32 targets xhci0 at pci0 dev 21 function 0 "Intel C3000 xHCI" rev 0x11: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 ppb4 at pci0 dev 22 function 0 "Intel C3000 PCIE" rev 0x11 pci5 at ppb4 bus 5 ix0 at pci5 dev 0 function 0 "Intel X553 SFP+" rev 0x11: msi, address XX ix1 at pci5 dev 0 function 1 "Intel X553 SFP+" rev 0x11: msi, address XX ppb5 at pci0 dev 23 function 0 "Intel C3000 PCIE" rev 0x11 pci6 at ppb5 bus 6 ix2 at pci6 dev 0 function 0 "Intel X553 Backplane" rev 0x11: msi, address XX ix3 at pci6 dev 0 function 1 "Intel X553 Backplane" rev 0x11: msi, address XX "Intel C3000 ME HECI" rev 0x11 at pci0 dev 24 function 0 not configured sdhc0 at pci0 dev 28 function 0 "Intel C3000 eMMC" rev 0x11: apic 2 int 16 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma "Intel C3000 LPC" rev 0x11 at pci0 dev 31 function 0 not configured "Intel C3000 PMC" rev 0x11 at pci0 dev 31 function 2 not configured "Intel C3000 SMBus" rev 0x11 at pci0 dev 31 function 4 not configured "Intel C3000 SPI" rev 0x11 at pci0 dev 31 function 5 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo sdmmc0: can't enable card softraid0 at root scsibus1 at softraid0: 256 targets PXE boot MAC address 0XXXX, interface ix2 root on rd0a swap on rd0b dump on rd0b WARNING: CHECK AND RESET THE DATE! erase ^?, werase -
Nope seems to hang just at that point when it's writing out the install menu. Booting verbose is also no help. Google is failing me. Seems surprising no one else has hit this on other devices...
-
I tried to install with 6.7-current but still the same issue. Could it be that some hardware is not supported by OpenBSD?
>> OpenBSD/amd64 PXEBOOT 3.52 boot> stty com0 115200 boot> set tty com0 switching console to com0 >> OpenBSD/amd64 PXEBOOT 3.52 boot> bsd.rd cannot open tftp:/etc/random.seed: No such file or directory booting tftp:bsd.rd: 3826381+1573888+3882216+0+757760 [324033+128+468408+313269]=0xaa33b8 entry point at 0xffffffff81001000 Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2020 OpenBSD. All rights reserved. https://www.OpenBSD.org OpenBSD 6.7-current (RAMDISK_CD) #27: Sat Aug 15 10:19:27 MDT 2020 deraadt@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/RAMDISK_CD real mem = 8562393088 (8165MB) avail mem = 8298868736 (7914MB) random: good seed from bootblocks mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x7f6d7020 (7 entries) bios0: vendor coreboot version "ADI_PLCC-01.00.00.11" date 01/08/2019 bios0: Silicom, Ltd. 80300-0134-g01 acpi0 at bios0: ACPI 3.0 acpi0: tables DSDT FACP SSDT MCFG TCPA APIC DMAR acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 4 (boot processor) cpu0: Intel(R) Atom(TM) CPU C3558 @ 2.20GHz, 2195.40 MHz, 06-5f-01 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,3DNOWP,PERF,ITSC,FSGSBASE,TSC_ADJUST,SMEP,ERMS,MPX,RDSEED,SMAP,CLFLUSHOPT,PT,SHA,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES cpu0: 2MB 64b/line 16-way L2 cache cpu0: cannot disable silicon debug cpu0: apic clock running at 25MHz cpu0: mwait min=64, max=64, C-substates=0.2.0.2, IBE cpu at mainbus0: not configured cpu at mainbus0: not configured cpu at mainbus0: not configured ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins, remapped acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (RP01) acpiprt2 at acpi0: bus -1 (RP02) acpiprt3 at acpi0: bus -1 (RP03) acpiprt4 at acpi0: bus -1 (RP04) acpiprt5 at acpi0: bus 2 (RP05) acpiprt6 at acpi0: bus -1 (RP06) acpiprt7 at acpi0: bus 3 (RP07) acpiprt8 at acpi0: bus 4 (RP08) acpicpu at acpi0 not configured "PNP0C0C" at acpi0 not configured acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001 "PNP0003" at acpi0 not configured acpicmos0 at acpi0 "INTC3000" at acpi0 not configured "BOOT0000" at acpi0 not configured pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel C3000 Host" rev 0x11 pchb1 at pci0 dev 4 function 0 "Intel C3000 GLREG" rev 0x11 "Intel C3000 RCEC" rev 0x11 at pci0 dev 5 function 0 not configured ppb0 at pci0 dev 6 function 0 "Intel C3000 PCIE" rev 0x11 pci1 at ppb0 bus 1 "Intel C3000 QAT" rev 0x11 at pci1 dev 0 function 0 not configured ppb1 at pci0 dev 14 function 0 "Intel C3000 PCIE" rev 0x11 pci2 at ppb1 bus 2 ppb2 at pci0 dev 16 function 0 "Intel C3000 PCIE" rev 0x11 pci3 at ppb2 bus 3 ppb3 at pci0 dev 17 function 0 "Intel C3000 PCIE" rev 0x11 pci4 at ppb3 bus 4 "Intel C3000 SMBus" rev 0x11 at pci0 dev 18 function 0 not configured ahci0 at pci0 dev 20 function 0 "Intel C3000 AHCI" rev 0x11: msi, AHCI 1.3.1 scsibus0 at ahci0: 32 targets xhci0 at pci0 dev 21 function 0 "Intel C3000 xHCI" rev 0x11: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 ppb4 at pci0 dev 22 function 0 "Intel C3000 PCIE" rev 0x11 pci5 at ppb4 bus 5 ix0 at pci5 dev 0 function 0 "Intel X553 SFP+" rev 0x11, msix, 1 queue, address xx ix1 at pci5 dev 0 function 1 "Intel X553 SFP+" rev 0x11, msix, 1 queue, address xx ppb5 at pci0 dev 23 function 0 "Intel C3000 PCIE" rev 0x11 pci6 at ppb5 bus 6 ix2 at pci6 dev 0 function 0 "Intel X553 Backplane" rev 0x11, msix, 1 queue, address xx ix3 at pci6 dev 0 function 1 "Intel X553 Backplane" rev 0x11, msix, 1 queue, address xx "Intel C3000 ME HECI" rev 0x11 at pci0 dev 24 function 0 not configured sdhc0 at pci0 dev 28 function 0 "Intel C3000 eMMC" rev 0x11: apic 2 int 16 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, ddr52, dma "Intel C3000 LPC" rev 0x11 at pci0 dev 31 function 0 not configured "Intel C3000 PMC" rev 0x11 at pci0 dev 31 function 2 not configured "Intel C3000 SMBus" rev 0x11 at pci0 dev 31 function 4 not configured "Intel C3000 SPI" rev 0x11 at pci0 dev 31 function 5 not configured isa0 at mainbus0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo com0: console com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo umass0 at uhub0 port 2 configuration 1 interface 0 "Sony Storage Media" rev 2.00/1.00 addr 2 umass0: using SCSI over Bulk-Only scsibus1 at umass0: 2 targets, initiator 0 sd0 at scsibus1 targ 1 lun 0: <Sony, Storage Media, 0100> removable serial.054c0439008123001204 sd0: 7740MB, 512 bytes/sector, 15851520 sectors sdmmc0: can't enable card softraid0 at root scsibus2 at softraid0: 256 targets PXE boot MAC address xx, interface ix2 root on rd0a swap on rd0b dump on rd0b erase ^?, werase -
For some reason the installer is hanging at that point. I have no idea why. It seems to be uncommon, I can find no other similar reports.
Using OpenBSD on the XG-7100 is going to be pretty restricted anyway even you do get it installed. You would only be able to use the SFP ports or anything in the expansion slot.
Steve
-
I also tried to install Freebsd 12.1 via the serial console. That worked like a charm after doing "set kern.vty=sc" :-)
-
Yes, I would expect it to. It's odd that the OpenBSD installer freezes at that point. If there were some reason for it I would expect to see a load of similar reports on other hardware.
-
Could you help me out on how to configure Marvell 88E6190? I only see ix0 ix1 ix2 ix3. They don't detect any UTP-cable.
-
In OpenBSD? I have no idea if the switch framework even exists there TBH.
-
Sorry about the confusion. I was talking about FreeBSD. I gave up on OpenBSD :-)
I will look in the image of the XG-7100. If I understand it correctly. I have to link the switch ports to the "behind the scene" ports. -
Yes, but the pfSense image for the XG-7100 has a number of modifications to allow that to happen.
Is there some reason you cannot just use the factory image here?Steve
-
No, I'm just trying to learn about the system and how it works.
-
Ah, OK. The internal layout is described here:
https://docs.netgate.com/pfsense/en/latest/solutions/xg-7100-1u/switch-overview.html
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.