Multi-Wan single interface traffic not routing as expected
-
Due to my location, internet access is limited and i'm forced to use a WISP that provides me with hardware addressed as 192.168.1.1 (GW1) and I also have a LTE router that is addressed 192.168.1.3 (GW2)
I have these two devices, and my pfsense WAN interface (addressed 192.168.1.2) connected to a dumb switch completely seperate from my LAN.
In pfsense under gateways, I have both devices set up with 192.168.1.1 (GW1) as the default gateway.
In Firewall under the LAN interface I have a pass all rule between LAN and Anywhere using GW1 as the gateway. Above this rule, I have a rule passing all traffic (all protocols) to, a specific public IP, lets say x.x.x.x specifying gateway as GW2 in the advanced settings.
However, when I tracert x.x.x.x from pfsense or any host on the LAN it is routed via GW1 instead of GW2
Even adding it as a static route, it still routes via GW1 despite being configured as GW2Any suggestions?
Thanks :)
bbjunkie -
No sooner had I posted this than I got it fixed. Been working at it for hours!
I deleted the gateway in the WAN interface configuration and now it works.Thanks anyway :) keep up the great work
bbjunkie