simple local DNS entries (unbound "vs" dnsmasq)

deemery

In particular, when I put this line in the "Custom Options" box, I got an error message:

local-data: "ns2.mydomain.com. A 192.168.10.88"

What am I doing wrong?

NogBadTheBad

The following works for me, try removing the trailing .

local-data: "ping.ui.com A 127.0.0.1"
local-data: "ping.ui.com AAAA ::1"

johnpoz

Did you put a server: in the custom option box before you made any entries?

No reason to put that in the custom box though, unless you have lots them and you just want to paste them in.. such a record you can just put in the host override via the gui entry.

deemery

@johnpoz That fixed it, thanks!

johnpoz

If all you have is A records, and there isn't all that many of them to put in at the same time.. Might be easier to just use the gui to put them in.. I leave the custom option box for stuff that can not put in the gui.

example

private-domain: "plex.direct"
local-zone: "use-application-dns.net"  always_nxdomain
local-zone: "local."  always_nxdomain

Or if you want to alter the TTL of a record to be something other than default.

But if you do have a lot of them, then yeah a simple paste of them would be faster ;)

deemery

@johnpoz I don't -think- I could use the Host Overrides to add the A record to add an alias for the PFSense box itself. For that, I just want an alias, I don't want to define the reverse look-up to the alias.

johnpoz

Sure you can.. host override is host override..

So you don't want the ptr to resolve? Doesn't make a lot of sense..

Gertjan

@deemery said in simple local DNS entries (unbound "vs" dnsmasq):

If all I need is DNS name resolution for names inside my local network

When you set up pfSense like this :

You will find in the /etc/hosts file this :

127.0.0.1	localhost localhost.my-local-domain.tld
::1	localhost localhost.my-local-domain.tld
192.168.1.1	myrouter.my-local-domain.tld myrouter
2001:470:dead:beef:2::1	myrouter.my-local-domain.tld myrouter
.....

Every other known host will also be present in that file.
Any modern OS has a /etc/hosts file (yep, even windows, it's in the system root, in /etc/hosts)
DHCP lease info (IP and host name) will be recorded.
Static hosts will be recorded there also.

And this file is used by the local 'DNS' ...

So, with you doing nothing, it already works just fine.

johnpoz

Also at a loss why your firewall would need an alias in the first place to be honest.. Its 1 device, why would you not just access via its actual name and record? you normally don't host other services on it, like websites or something that you would want/need to use another name.

deemery

@johnpoz said in simple local DNS entries (unbound "vs" dnsmasq):

Also at a loss why your firewall would need an alias in the first place to be honest.. Its 1 device, why would you not just access via its actual name and record? you normally don't host other services on it, like websites or something that you would want/need to use another name.

That's a fair question. 3 partial answers :-) :-)

naming convention I'm used to. "ns.mydomain.com" is the name for the domain server. Considering I don't do this kind of work all the time, there is substantial value to following naming conventions so when I come back in a year or two, it's easier to figure out what I did previously.
Generally, I want to "change it once and leave it alone" when it comes to network settings across devices. That's particularly true for the ~10 devices on my home network (including iPhone/iPad)
right now, the PFSense is NOT my router/firewall device. But come to think of it, if I do change that, I'll have to touch all the device network settings anyway.

In the short run, I want to get DNS on PFSense working first. Then I can decommission the OS X Server instance that now provides DNS, knowing that (after I change the network settings across my network devices :-) ) name resolution will work. Then I can slowly experiment with other PFSense services. (Starting with VPN, then moving to DHCP and firewall.)

And @Gertjan , no /etc/hosts access on iDevices like iPhone or iPad. There's not much dependency in these devices for local names in mydomain.com, but I still want things to be consistent across the set of devices. (I'm not quite sure how "Files" works on iPad, probably .local/bonjour networking....)

Gertjan

@deemery said in simple local DNS entries (unbound "vs" dnsmasq):

@Gertjan , no /etc/hosts access on iDevices like iPhone or iPad.

I have those in my /etc/hosts file. All of them. 4 iPhones, and an iPad.

Because all these devices, from Samsung, Apple, Dell, etc do the same thing : they have and use a DHCP client. So the DHCP server answering them (pfSEnse) - and some code magic, and ... they wind up in /etc/.hosts
And, again, this file is used by the unbound (resolver) or dnsmasq, the forwarder.
The /etc/hosts file is the local (for pfSense) "database" with known local LAN based devices.

johnpoz

The only issue with registering of dhcp clients in unbound, is it restarts unbound.. So depending on how many clients you have, and how short your lease time is.. There can be some issues with unbound restarting all the time.

I don't register dhcp clients for this reason.. All clients I want to be able to resolve have reservations - which I do register..

Most people will not have problem with unbound restarting... Not great for your cache ;) But normally people will not see any issues with it doing that.

But yeah sure, out of the box you have some dhcp client - called billy, you would be able to resolve billy.yourdomain.tld because of the dhcp lease being registered in unbound, via addition of it in the host file.

deemery

@johnpoz Most of my Macs are both wired and wireless (some Apple services complain if they can't talk to WiFi). For those, I assign a fixed IP and DNS entry for the wired, and let the wireless pick up the DHCP.

But I do have one laptop I carry around the house that is WiFi only. I suppose I should configure that as "DHCP with fixed IP Address" and the associated DNS A record entry.

@Gertjan So your /etc/hosts is only on the PFSense box? That would meet my "define things in only 1 place" objective :-)

johnpoz

@deemery said in simple local DNS entries (unbound "vs" dnsmasq):

(some Apple services complain if they can't talk to WiFi).

Huh? Just out of curiosity.. Your saying some box running some service, while it has a wired connection it puts up some error or info that wireless is not connected? So set these devices up multihomed? Both wired and wireless? That seems counterproductive to me..

deemery

@johnpoz Not an error, but a complaint. Example the Maps application complains "better location accuracy if WiFi is enabled." (Understandable, because I believe they use 'what WiFi can I see near me' to determine location. Google does the same thing, I believe.)

deemery

Well darn! I thought I had this figured out.

I cabled a machine directly to the LAN port, and set the DNS server to the PFSense box using its LAN IP address. That worked, nslookup returned values.

So then I unplugged the LAN cable, and set the DNS server to the PFSense box on the IP address of the WAN port. That did NOT work. And I'm not sure why.... nslookup times out.

johnpoz

Well I don't have any apple devices with wired interfaces to test this with, but wouldn't just disable of the wifi interface remove such nonsense popups, etc..

My iphone pops up such info, when using just cell data.. But don't recall ever seeing my PC doing anything like that.. It has a wifi adapter - its just disabled, guess I can turn it on and not connect it and see if get such popups asking to enable wifi..

edit: ok just tested this on my windows PC going to google maps and clicking my location. While the browser asks if ok to hand out info (i have it set not to let sites use location info).. Sure mentions nothing about wifi, I have my wifi adapter enabled, just not connected to anything.

Normally that is just disabled.

Wouldn't it be easier to just disable the hardware of your wifi, if the device is hardwired? Shoot many a laptop device will auto disable wifi when ethernet is connected.. I sure wouldn't multihome a device to remove some info about some stupid app asking me to enable wifi ;) heheh.. If I couldn't turn that off - I wouldn't use such a shitty app to be honest..

NogBadTheBad

@johnpoz

Wouldn't it be easier to just disable the hardware of your wifi, if the device is hardwired? Shoot many a laptop device will auto disable wifi when ethernet is connected.. I sure wouldn't multihome a device to remove some info about some stupid app asking me to enable wifi ;) heheh.. If I couldn't turn that off - I wouldn't use such a shitty app to be honest..

You need to switch on Wi-Fi & Bluetooth if you want to unlock your Mac from an Apple Watch if you have one.

Screenshot 2020-09-03 at 17.01.40.png

It's a right pain, I have a wired Mac that I have to enable Wi-Fi & Bluetooth on.

If I connect to another SSID at home, lets say my GUEST network from my phone and I haven't connected to it before, the SSID is then known on the Mac and it connects automatically, you then have to untick Automatically join this network.

Screenshot 2020-09-03 at 17.05.38.png

Apples logic on this seems a little braindead.

johnpoz

@NogBadTheBad said in simple local DNS entries (unbound "vs" dnsmasq):

Apples logic on this seems a little braindead.

Yeah that is prob an understatement...

If you want to do some proximity unlock thing - wouldn't bluetooth be the better option here? And really the only thing required to be on..

NogBadTheBad

@johnpoz said in simple local DNS entries (unbound "vs" dnsmasq):

@NogBadTheBad said in simple local DNS entries (unbound "vs" dnsmasq):

Apples logic on this seems a little braindead.

Yeah that is prob an understatement...

If you want to do some proximity unlock thing - wouldn't bluetooth be the better option here? And really the only thing required to be on..

I'd have thought so :)