Load balancing Servers on LAN
-
Hi Team,
I have a query with server load balancing on pfsense version 2.4.3.
- There are 2 servers in in the LAN network - 10.1.0.20/24 & 10.1.0.30/24
- A VIP has been created on pfsense for the LAN network - 10.1.0.10 /24
- The GW is 10.1.0.1/24.
- Under "Pools" created "Servers" with the IP = 10.1.0.20/24 & 10.1.0.30/24 on Port 80.
- Under "Virtual Servers" created with the VIP = 10.1.0.10 /24 & Protocol TCP pointing the "Servers" pool to be load balanced.
- An Alias has been created with name "LB-Servers" holding IP 10.1.0.20/24 & 10.1.0.30/24.
- A firewall Rule has been added under LAN network to allow traffic to Alias "LB-Servers. "
Q: When I check the status of Loadbalancer,
Pools >> Servers
10.1.0.20/24:80 (00.0%)
10.1.0.30/24:80 (00.0%)Virtual Servers >> LB-Servers
10.1.0.10:80 10.1.0.20 Down
10.1.0.10:80 10.1.0.30 DownHowever if I change the protocol on Virtual Servers from TCP to DNS then i see,
Virtual Servers >> LB-Servers
10.1.0.10:80 10.1.0.20 Active
10.1.0.10:80 10.1.0.30 ActivePools >> Servers (This remains the same)
10.1.0.20/24:80 (00.0%)
10.1.0.30/24:80 (00.0%)Hope this a supported configuration. Kindly share your inputs at the earliest...
Regards
Viki -
This post is deleted! -
This post is deleted!