VLAN not showing up in DHCP
-
I made a mistake with a VLAN configuration and when I modified it to what it was meant to be (There were no warnings about the DHCP server) I now cannot see my VLAN under the DHCP service, I am now getting alerts all the time such as
Invalid DHCP pool 192.168.120.101 - 192.168.120.250 for VLAN20 subnet 192.168.120.252/32 detected. Please correct the settings in Services, DHCP Server
I have tried taking the working configuration from the Primary PFSense and restoring it to the second one (which is the one having this issue) and had no luck.
-
What's your subnet range in vlan20? Maybe it's not covering the address pool assigned in DHCP?
-
@benrichardson_insync said in VLAN not showing up in DHCP:
192.168.120.252/32
The problem is right there :) You seem to have accidentally configured the interface with a /32 subnet mask. DHCP can not be configured when there's no address space to use ;) As you wrote about primary and secondary: did you check BOTH nodes, that both have e.g. a /24 subnet selection in their VLAN20 interface config?
