pfSense as DHCP server without interface for each subnet
-
I have cisco L3 switch with some vlans
10.10.1.X/24
10.10.2.X/24
10.10.3.X/24
my pfsense has only 1 100Mb interface, so i want to route traffic between subnets inside cisco, pfsense will route only trafic to WAN.
pfsense config:
WAN - int.1 - DHCP
LAN - int.2 (10.10.0.1)
Is it possible to create 3 DHCP subnets inside pfsense and set ip-helper to 10.10.0.1 on cisco? -
@max-pfsense said in pfSense as DHCP server without interface for each subnet:
100Mb interface,
Hi,
Most L3 Cisco switches include a built-in DHCP server that you can configure for any of the configured VLANs...
pfSense can only assign a DHCP server to an interface, just like any other tool..
which I don't recommend because of port 100 (fast ethernet), but it can be a solution ...
create VLANs in pfSense and assign a DHCP server