Speed issues with Pfsense.
-
I am using a WatchGuard M400. One of the guys here who has contributed a lot to getting the M400 on Pfsense setup my router and I haven't any issues until now. My M400 has an i5-4570, 8GB of RAM, and a 240GB SSD, is not slouch. lol
I am using 2.4.5-Release-P1.
So I have small business cable 1Gb/50Mbps service. When I plug directly into the modem using my laptop and run speed tests I get 900-950Mbps/54Mbps, I tried different speed tests each time and ended up with the same results.
I installed the speedtest app through command and ran on my Pfsense it seems to max around 650Mbps never going any faster. I initially thought it was a problem with my switches as I have two Cisco 3560's but it's not, as I connected the modem directly to the PFSense.
Previously I had Traffic Shaper working with my old internet. I removed the policy which hasn't helped, so I don't know if traffic shaper is the problem not?
The previous speed I has was 300/30.
Any help would be appreciate it.
-
Running the speedtest CLI test on pfSense itself is not an accurate test.
What throughput do you see from the laptop connected to the pfSense LAN?
An i5-4570 should have no problems at all passing 1Gbps.
Steve