I want External public ip on LAN Clients.
-
(I used Google translate..)
Hello. I am using the pfsense firewall.
I want External public ip on Lan Clients.
I have eight External public ips.
The use of pfsense,
(ModemWAN) -
pfsense Computer -
└ LAN Computers (192.168.1.2)
└ LAN Computers (192.168.1.3)
└ LAN Computers (192.168.1.4)….
I want External public ip on LAN Clients.
(ModemWAN) -
pfsense Computer -
└ LAN Computers (12*...1)
└ LAN Computers (12...2)
└ LAN Computers (12..**.**3)What should I do?
Thankyou
(korean->)
안녕하세요. 저는 pfsense 방화벽을 사용하고 있습니다.
저는 LAN Client 들에게 공인(외부) 아이피를 할당 하고 싶습니다.
저는 8개의 공인(외부)아이피를 가지고 있습니다.pfsense를 사용하는경우
(인터넷 모뎀WAN) -
pfsense 컴퓨터 -
└ 각각 pfsense와 연결된 LAN 컴퓨터 (192.168.1.2)
└ 각각 pfsense와 연결된 LAN 컴퓨터 (192.168.1.3)
└ 각각 pfsense와 연결된 LAN 컴퓨터 (192.168.1.4)저는 공인 아이피가 할당되게 하고 싶습니다.
(인터넷 모뎀WAN) -
pfsense 컴퓨터 -
└ 각각 pfsense와 연결된 LAN 컴퓨터 (12*...1)
└ 각각 pfsense와 연결된 LAN 컴퓨터 (12...2)
└ 각각 pfsense와 연결된 LAN 컴퓨터 (12..**.**3)가상화 프로그램의 네트워크를 설정할때 외부 아이피가 할당되게끔 하는것 처럼요.
-
Why would you want this would be my first question.. So is this public netblock of 8 addresses you have actually routed to you, or your IS just gave you some IPs… I have to assume they just gave you some IPs in a larger subnet since there is no mask that allow for 8 IPs.. there is a /29 with 6 usable addresses or /28 with 14...
So you can either just setup 1:1 natting with your public IPs as vips on your wan mapped to the private IP on the inside.. Or you can setup pfsense in bridge mode, so it just bridges your wan connection into lan..
-
Hello @icedata,
Maybe you can use additional small switch and put before pfsense and use the same switch to connect to LAN clients?
:)