Upgrade 2.2.5 -> 2.2.6 and now ping-times to the gateways have doubled

[matsan]

Hi,
on Thursday I installed the 2.2.6 upgrade on my units (APU1D) and I now notice that the RRD Graphs shows an increase in the ping responses starting after the upgrade:
and

I have tried restarting the unit but still the same slow-down.
No other changes than allow the automatic upgrade to complete.

Known issue?
/Mattias

[johnpoz]

you sure your not just getting normal times now, when before apinger was giving you wrong values?

For example… Mine currently shows ping times that are just plain impossible..  If I restart the apinger service they become more realistic..

So you sure you were not seeing wrong values before, and now your seeing more actual values?  From a cmd line do an actual ping..

Apinger is terrible.. Browse the threads you will find thread after thread after thread asking when apinger can be fixed/replaced..  Which seems to be hopeful for 2.3

[matsan]

@johnpoz:

you sure your not just getting normal times now, when before apinger was giving you wrong values?

Good point, that would explain it. I normally only ping the upstream COMHEM gateway and it is between 3-8 ms so the difference is not that much in number but sure showed up in the graphs.

Thanks,
/Mattias

[David_W]

@johnpoz:

Apinger is terrible.. Browse the threads you will find thread after thread after thread asking when apinger can be fixed/replaced..  Which seems to be hopeful for 2.3

2.3-BETA has switched to dpinger.