VLAN Tags pfSense on Hp switch? SOLVED

[killmasta93]

Hi,
I was wondering if someone could help me out figure out what I am doing wrong on the HP-2920-48G switch?

So I have pfSense as my gateway 192.168.1.254 and have 2 VLANS for guests and devices and currently i have it working perfectly with an EdgeRouter X and on a dumb switch 10/100/100 tp link. So I thought in theory if the EdgeRouter X and the TP link can be able to pass the VLAN number to the UNIFI AP then i thought a much more robust hp switch would have no issue. Then i disconnected the EdgeRouter X and connected all the ethernet cords to the Hp switch and the worst part it was not getting DHCP only for the VLANS because the 192.168.1.0/24 works fine. So im not sure what im doing wrong or if i need to configure something special on the HP switch.

See picture

Thank you

[killmasta93]

EDIT:

these are the pics to make it work if anyone has the same issue

The VLANS 3 AND VLANS 4

on the switch I have on port 1 my pfSense PORT 14,16,18 my AP-LR PORT 20 my powerbeam

I tagged ONLY on the VLANS 3(invitados) and VLANS 4 (dispositivos) and make sure the primarly default NOTHING IS TAGGED that vlan everything has to be untagged

Hope this helps

see pictures