Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Sierra MC7354 LTE for WAN

    Scheduled Pinned Locked Moved Wireless
    19 Posts 3 Posters 1.7k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • J
      jcarver81
      last edited by

      /var/etc/mpd_wan.conf

      startup:
	# configure the console
	set console close
	# configure the web server
	set web close

default:
pppclient:
	create bundle static wan
	set bundle enable ipv6cp
	set iface name ppp0
	set iface disable on-demand
	set iface idle 0
	set iface enable tcpmssfix
	set iface up-script /usr/local/sbin/ppp-linkup
	set iface down-script /usr/local/sbin/ppp-linkdown
	set ipcp ranges 0.0.0.0/0 10.64.64.0/0
	set ipcp enable req-pri-dns
	set ipcp enable req-sec-dns
	#log -bund -ccp -chat -iface -ipcp -lcp -link

	create link static wan_link0 modem
	set link action bundle wan
	set link disable multilink
	set link keep-alive 10 60
	set link max-redial 0
	set link disable chap pap
	set link accept chap pap eap
	set link disable incoming
	set link mtu 1492
	set auth authname "user"
	set auth password ???
	set modem device /dev/cuaU0.2
	set modem script DialPeer
	set modem idle-script Ringback
	set modem watch -cd
	set modem var $DialPrefix "DT"
	set modem var $Telephone "*99#"
	set modem var $InitString "&F"
	set modem var $APN "fast.t-mobile.com"
	set modem var $APNum "1"
	open

      /etc/ppp/ppp.conf

      Default:
	set log Phase Chat LCP IPCP CCP tun command
	ident user-ppp VERSION
	set device /dev/cuaU0.2
	set timeout 180
	set speed 921600
	set dial “ABORT BUSY TIMEOUT 3 \
		\”\” \
		AT OK-AT-OK \
		AT+CFUN=1 OK-AT-OK \
		AT+CMEE=2 OK-AT-OK\
		AT+CSQ OK \
		AT+CGDCONT=1,\\\”IP\\\”,\\\”fast.t-mobile.com\\\” OK \
		ATD*99# CONNECT”
	set timeout 180
	enable dns
	resolve writable
	set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
	add default HISADDR
      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        Ah, OK you're not using mpd at all.
        It looks like you're manually setting an interface IP and gateway though. Obviously the server you connect to should pass that to you. Does that not happen if you omit that?

        It does look like the modem itself is working fine and this is just a problem with the init script.

        Steve

        1 Reply Last reply Reply Quote 0
        • stephenw10S
          stephenw10 Netgate Administrator
          last edited by

          @jcarver81 said in Sierra MC7354 LTE for WAN:

          set ipcp ranges

          This value in your conf might be preventing it negotiate. If you check the man page:
          http://mpd.sourceforge.net/doc/mpd26.html

          You'll see it is only allowing the remote side to be 10.64.64.0, though it's /0 so that should be any IP.....

          But when it comes up using the custom ppp conf file presumably the remote gateway is 10.0.0.2?

          Steve

          1 Reply Last reply Reply Quote 0
          • J
            jcarver81
            last edited by

            Correct. I'm able to establish a connection using PPP and it works using the config I posted. The config was found on a FreeBSD forum for this specific LTE card. The set ifaddr line is a default from FreeBSD's /etc/ppp/ppp.conf as far as I am aware which enables the provider to set the IP upon connection.

            If the IP address changes whenever a connection is made, change this line to the following value. This tells ppp(8) to use the IP Configuration Protocol (IPCP) to negotiate a dynamic IP address:

set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255 0.0.0.0

            I'm no expert in FreeBSD obviously. Can you see what I would need to do within pfSense to get this working with the information I have provided?

            1 Reply Last reply Reply Quote 0
            • J
              jcarver81
              last edited by

              Those values in mpd_wan.conf are set by the pfSense GUI. I did not see an option to select anything regarding IP addressing in the GUI.

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                My own connection here also uses that config line but it does come up with that gateway:

                ppp0: flags=88d1<UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST> metric 0 mtu 1492
	description: 3GWAN
	inet6 fe80::208:a2ff:fe0c:bba%ppp0 prefixlen 64 scopeid 0x10
	inet 188.29.x.xxx --> 10.64.64.0 netmask 0xffffffff
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

                When you use your custom ppp file what IP does it actually come up as?

                Steve

                1 Reply Last reply Reply Quote 0
                • stephenw10S
                  stephenw10 Netgate Administrator
                  last edited by

                  You can use an entirely custom mpd conf file by creating: /conf/mpd_wan.conf.

                  pfSense will use that in preference to the auto created file in /var.

                  Steve

                  1 Reply Last reply Reply Quote 0
                  • J
                    jcarver81
                    last edited by

                    from /var/log/ppp.log

                    Nov  6 09:47:36 pfSense ppp[41290]: Phase: Using interface: tun0
Nov  6 09:47:36 pfSense ppp[41290]: Phase: deflink: Created in closed state
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: ident user-ppp VERSION
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set device /dev/cuaU0.2
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set timeout 180
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set speed 921600
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set dial ABORT BUSY TIMEOUT 3         ""         AT OK-AT-OK         AT+CFUN=1 OK-AT-OK         AT+CMEE=2 OK-AT-OK         AT+CSQ OK         AT+CGDCONT=1,\"IP\",\"fast.t-mobile.com\" OK         ATD*99# CONNECT
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set timeout 180
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: enable dns
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: resolv writable
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: add default HISADDR
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set log Phase Chat LCP IPCP CCP tun command
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: ident user-ppp VERSION
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set device /dev/cuaU0.2
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set timeout 180
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set speed 921600
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set dial ABORT BUSY TIMEOUT 3         ""         AT OK-AT-OK         AT+CFUN=1 OK-AT-OK         AT+CMEE=2 OK-AT-OK         AT+CSQ OK         AT+CGDCONT=1,\"IP\",\"fast.t-mobile.com\" OK         ATD*99# CONNECT
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set timeout 180
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: enable dns
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: resolv writable
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.0 0.0.0.0
Nov  6 09:47:36 pfSense ppp[41290]: tun0: Command: default: add default HISADDR
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: PPP Started (ddial mode).
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: bundle: Establish
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: deflink: closed -> opening
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: deflink: Connected!
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: deflink: opening -> dial
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: AT^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): OK
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: AT^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: OK^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: AT+CFUN=1^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): OK
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: AT+CFUN=1^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: OK^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: AT+CMEE=2^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): OK
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: AT+CMEE=2^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: OK^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: AT+CSQ^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): OK
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: AT+CSQ^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: +CSQ: 17,99^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: ^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: OK^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: AT+CGDCONT=1,"IP","fast.t-mobile.com"^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): OK
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: AT+CGDCONT=1,"IP","fast.t-mobile.com"^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: OK^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Send: ATD*99#^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Expect(3): CONNECT
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: ATD*99#^M^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Chat: Received: CONNECT 100000000^M
Nov  6 09:47:36 pfSense ppp[41479]: tun0: Phase: deflink: dial -> carrier
Nov  6 09:47:37 pfSense ppp[41479]: tun0: Phase: deflink: /dev/cuaU0.2: CD detected
Nov  6 09:47:37 pfSense ppp[41479]: tun0: Phase: deflink: carrier -> login
Nov  6 09:47:37 pfSense ppp[41479]: tun0: Phase: deflink: login -> lcp
Nov  6 09:47:37 pfSense ppp[41479]: tun0: LCP: FSM: Using "deflink" as a transport
Nov  6 09:47:37 pfSense ppp[41479]: tun0: LCP: deflink: State change Initial --> Closed
Nov  6 09:47:37 pfSense ppp[41479]: tun0: LCP: deflink: State change Closed --> Stopped
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: LayerStart
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: SendConfigReq(1) state = Stopped
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACFCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  PROTOCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACCMAP[6] 0x00000000
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MRU[4] 1500
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM[6] 0xe7eed2ec
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: State change Stopped --> Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: RecvConfigReq(2) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACCMAP[6] 0x00000000
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM[6] 0x52daca5e
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  PROTOCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACFCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: SendConfigAck(2) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACCMAP[6] 0x00000000
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  AUTHPROTO[5] 0xc223 (CHAP 0x05)
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM[6] 0x52daca5e
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  PROTOCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACFCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: State change Req-Sent --> Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: RecvConfigAck(1) state = Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACFCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  PROTOCOMP[2]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  ACCMAP[6] 0x00000000
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MRU[4] 1500
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM[6] 0xe7eed2ec
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: State change Ack-Sent --> Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: LayerUp
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: SendIdent(0) state = Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM e7eed2ec
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  TEXT user-ppp 3.4.2
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: bundle: Authenticate
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: deflink: his = CHAP 0x05, mine = none
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: RecvDiscardReq(3) state = Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: Chap Input: CHALLENGE (16 bytes from UMTS_CHAP_SRVR)
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: Chap Output: RESPONSE ()
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: Chap Input: SUCCESS
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: Using trigger address 0.0.0.0
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: FSM: Using "deflink" as a transport
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: deflink: State change Initial --> Closed
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: deflink: LayerStart.
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: MPPE: Not usable without CHAP81
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: deflink: SendConfigReq(1) state = Closed
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP:  DEFLATE[4] win 15
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP:  PRED1[2] 
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: deflink: State change Closed --> Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: deflink: lcp -> open
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Phase: bundle: Network
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: FSM: Using "deflink" as a transport
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: State change Initial --> Closed
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: LayerStart.
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: SendConfigReq(1) state = Closed
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  PRIDNS[6] 8.8.8.8
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  SECDNS[6] 255.255.255.255
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: State change Closed --> Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: RecvProtocolRej(4) state = Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: -- Protocol 0x80fd (Compression Control Protocol) was rejected!
Nov  6 09:47:38 pfSense ppp[41479]: tun0: CCP: deflink: State change Req-Sent --> Stopped
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: RecvConfigReq(0) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:   [EMPTY]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: SendConfigNak(0) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 10.0.0.2
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: RecvConfigRej(1) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP: deflink: SendIdent(1) state = Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  MAGICNUM e7eed2ec
Nov  6 09:47:38 pfSense ppp[41479]: tun0: LCP:  TEXT user-ppp 3.4.2
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  COMPPROTO[6] 16 VJ slots with slot compression
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: SendConfigReq(2) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 0.0.0.0
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  PRIDNS[6] 8.8.8.8
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  SECDNS[6] 255.255.255.255
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: RecvConfigReq(1) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:   [EMPTY]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: SendConfigAck(1) state = Req-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:   [EMPTY]
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: State change Req-Sent --> Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: RecvConfigNak(2) state = Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 29.138.211.50
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] changing address: 0.0.0.0  --> 29.138.211.50
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  PRIDNS[6] 10.177.0.34
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  SECDNS[6] 10.177.0.210
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: Primary nameserver set to 10.177.0.34
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: Secondary nameserver set to 10.177.0.210
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: SendConfigReq(3) state = Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 29.138.211.50
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  PRIDNS[6] 10.177.0.34
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  SECDNS[6] 10.177.0.210
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: RecvConfigAck(3) state = Ack-Sent
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  IPADDR[6] 29.138.211.50
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  PRIDNS[6] 10.177.0.34
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP:  SECDNS[6] 10.177.0.210
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: State change Ack-Sent --> Opened
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: deflink: LayerUp.
Nov  6 09:47:38 pfSense ppp[41479]: tun0: IPCP: myaddr 29.138.211.50 hisaddr = 10.0.0.2
Nov  6 09:47:38 pfSense ppp[41479]: tun0: Warning: ff02::/: Change route failed: errno: Network is unreachable
                    1 Reply Last reply Reply Quote 0
                    • J
                      jcarver81
                      last edited by

                      ifconfig

                      tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> metric 0 mtu 1500
	options=80000<LINKSTATE>
	inet 29.138.211.50 --> 10.0.0.2 netmask 0xffffff00
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: tun
	Opened by PID 41479
                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        Ok, so maybe try creating the custom file in /conf and setting the remote address to 10.0.0.2/0 there.
                        Both are /0 so it should allow any IP from either but it's a difference....

                        1 Reply Last reply Reply Quote 0
                        • J
                          jcarver81
                          last edited by

                          Same result. About to order a Mofi4500 and just use the pfSense strictly as a firewall at this point. It shouldn't be this difficult to configure an LTE modem. Especially one that is on the "Supported 3g/4g Modem" list.

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            I certainly wouldn't expect it to be given the right settings.

                            You will likely get better throughput from an external modem anyway though.

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • C
                              canhtuongvinh
                              last edited by

                              Hi, I'm using the MC7354 module but I can't figure it out how to solve this, can you guys help me out?

                              Do I need to reflash the module?

                              Sep 29 19:16:48	ppp	56539	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 29 19:16:48	ppp	56539	[opt1_link0] MODEM: chat script failed
Sep 29 19:16:49	ppp	56539	[opt1_link0] Link: DOWN event
Sep 29 19:16:49	ppp	56539	[opt1_link0] LCP: Down event
Sep 29 19:16:49	ppp	56539	[opt1_link0] Link: reconnection attempt 18 in 2 seconds
Sep 29 19:16:52	ppp	56539	[opt1_link0] Link: reconnection attempt 18
Sep 29 19:17:05	ppp	56539	[opt1_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
Sep 29 19:17:05	ppp	56539	[opt1_link0] MODEM: chat script failed
Sep 29 19:17:06	ppp	56539	[opt1_link0] Link: DOWN event
Sep 29 19:17:06	ppp	56539	[opt1_link0] LCP: Down event
                              stephenw10S 1 Reply Last reply Reply Quote 0
                              • stephenw10S
                                stephenw10 Netgate Administrator @canhtuongvinh
                                last edited by

                                @canhtuongvinh said in Sierra MC7354 LTE for WAN:

                                CHAT: The modem is not responding to "AT"

                                The port you're using is not configured as an AT interface. Try one of the other ports.

                                But please keep this in one thread. It might be better to start a new thread than these older ones.

                                Steve

                                1 Reply Last reply Reply Quote 1
                                • First post
                                  Last post
                                Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.