PfSense TG-3468 Not Detected as NIC
-
I am having an issue with PfSense detecting my TG-3468 NIC that I bought. I have downloaded the if_re.ko Driver from Realtek for this card. I went into /boot/loader.conf and added 'if_re_load="YES"' and it is still not working.
This is the output of my pciconf -lv. none2 is the NIC in qustion.
hostb0@pci0:0:0:0: class=0x060000 card=0x309717aa chip=0x0c008086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = '4th Gen Core Processor DRAM Controller' class = bridge subclass = HOST-PCI pcib1@pci0:0:1:0: class=0x060400 card=0x309717aa chip=0x0c018086 rev=0x06 hdr=0x01 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller' class = bridge subclass = PCI-PCI vgapci0@pci0:0:2:0: class=0x030000 card=0x309717aa chip=0x04128086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller' class = display subclass = VGA hdac0@pci0:0:3:0: class=0x040300 card=0x309717aa chip=0x0c0c8086 rev=0x06 hdr=0x00 vendor = 'Intel Corporation' device = 'Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller' class = multimedia subclass = HDA xhci0@pci0:0:20:0: class=0x0c0330 card=0x309717aa chip=0x8c318086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB xHCI' class = serial bus subclass = USB none0@pci0:0:22:0: class=0x078000 card=0x309717aa chip=0x8c3a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family MEI Controller' class = simple comms uart2@pci0:0:22:3: class=0x070002 card=0x309717aa chip=0x8c3d8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family KT Controller' class = simple comms subclass = UART em0@pci0:0:25:0: class=0x020000 card=0x309717aa chip=0x153a8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Ethernet Connection I217-LM' class = network subclass = ethernet ehci0@pci0:0:26:0: class=0x0c0320 card=0x309717aa chip=0x8c2d8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB pcib2@pci0:0:28:0: class=0x060400 card=0x309717aa chip=0x8c108086 rev=0xd4 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI pcib3@pci0:0:28:3: class=0x060400 card=0x309717aa chip=0x8c168086 rev=0xd4 hdr=0x01 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family PCI Express Root Port' class = bridge subclass = PCI-PCI ehci1@pci0:0:29:0: class=0x0c0320 card=0x309717aa chip=0x8c268086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family USB EHCI' class = serial bus subclass = USB isab0@pci0:0:31:0: class=0x060100 card=0x309717aa chip=0x8c4e8086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = 'Q87 Express LPC Controller' class = bridge subclass = PCI-ISA ahci0@pci0:0:31:2: class=0x010601 card=0x309717aa chip=0x8c028086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode]' class = mass storage subclass = SATA none1@pci0:0:31:3: class=0x0c0500 card=0x309717aa chip=0x8c228086 rev=0x04 hdr=0x00 vendor = 'Intel Corporation' device = '8 Series/C220 Series Chipset Family SMBus Controller' class = serial bus subclass = SMBus none2@pci0:1:0:0: class=0x020000 card=0x816810ec chip=0x816110ec rev=0x15 hdr=0x00 vendor = 'Realtek Semiconductor Co., Ltd.' class = network subclass = ethernet pcib4@pci0:3:0:0: class=0x060401 card=0x309717aa chip=0x88931283 rev=0x41 hdr=0x01 vendor = 'Integrated Technology Express, Inc.' device = 'IT8893E PCIe to PCI Bridge' class = bridge subclass = PCI-PCI
-
Output of cat /var/log/dmesg.boot
Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 11.3-STABLE #243 abf8cba50ce(RELENG_2_4_5): Tue Jun 2 17:53:37 EDT 2020 root@buildbot1-nyi.netgate.com:/build/ce-crossbuild-245/obj/amd64/YNx4Qq3j/build/ce-crossbuild-245/sources/FreeBSD-src/sys/pfSense amd64 FreeBSD clang version 8.0.1 (tags/RELEASE_801/final 366581) (based on LLVM 8.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 9107931136 (8686 MB) avail memory = 8030679040 (7658 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TC-FB > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs FreeBSD/SMP: 1 package(s) x 4 core(s) ioapic0 <Version 2.0> irqs 0-23 on motherboard SMP: AP CPU #1 Launched! SMP: AP CPU #2 Launched! SMP: AP CPU #3 Launched! Timecounter "TSC-low" frequency 1646221809 Hz quality 1000 ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xffffffff806a2fd0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xffffffff806a3080, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xffffffff806ca140, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xffffffff806ca1f0, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xffffffff806ca2a0, 0) error 1 random: entropy device external interface ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xffffffff806a2f20, 0) error 1 wlan: mac acl policy registered kbd1 at kbdmux0 000.000022 [4213] netmap_init netmap: loaded module module_register_init: MOD_LOAD (vesa, 0xffffffff812d9960, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" mlx5en: Mellanox Ethernet driver 3.5.2 (September 2019) nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard padlock0: No ACE support. acpi0: <LENOVO TC-FB> on motherboard acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 cpu1: <ACPI CPU> on acpi0 cpu2: <ACPI CPU> on acpi0 cpu3: <ACPI CPU> on acpi0 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0 atrtc0: Warning: Couldn't map I/O. atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pcib0: _OSC returned error 0x10 pci0: <ACPI PCI bus> on pcib0 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <network, ethernet> at device 0.0 (no driver attached) vgapci0: <VGA-compatible display> port 0xf000-0xf03f mem 0xf7800000-0xf7bfffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf7d30000-0xf7d33fff irq 16 at device 3.0 on pci0 xhci0: <Intel Lynx Point USB 3.0 controller> mem 0xf7d20000-0xf7d2ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection 7.6.1-k> port 0xf080-0xf09f mem 0xf7d00000-0xf7d1ffff,0xf7d39000-0xf7d39fff irq 20 at device 25.0 on pci0 em0: Using an MSI interrupt em0: Ethernet address: d8:cb:8a:bc:dc:ff em0: netmap queues/slots: TX 1/1024, RX 1/1024 ehci0: <Intel Lynx Point USB 2.0 controller USB-B> mem 0xf7d38000-0xf7d383ff irq 17 at device 26.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0 pci2: <ACPI PCI bus> on pcib2 pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0 pci3: <ACPI PCI bus> on pcib3 pcib4: <ACPI PCI-PCI bridge> irq 19 at device 0.0 on pci3 pci4: <ACPI PCI bus> on pcib4 ehci1: <Intel Lynx Point USB 2.0 controller USB-A> mem 0xf7d37000-0xf7d373ff irq 23 at device 29.0 on pci0 usbus2: EHCI version 1.0 usbus2 on ehci1 usbus2: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point AHCI SATA controller> port 0xf0d0-0xf0d7,0xf0c0-0xf0c3,0xf0b0-0xf0b7,0xf0a0-0xf0a3,0xf060-0xf07f mem 0xf7d36000-0xf7d367ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 5 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich3: <AHCI channel> at channel 3 on ahci0 ahciem0: <AHCI enclosure management bridge> on ahci0 acpi_button0: <Power Button> on acpi0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz1: <Thermal Zone> on acpi0 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 orm0: <ISA Option ROM> at iomem 0xd0000-0xd0fff on isa0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] ppc0: cannot reserve I/O port range est0: <Enhanced SpeedStep Frequency Control> on cpu0 est1: <Enhanced SpeedStep Frequency Control> on cpu1 est2: <Enhanced SpeedStep Frequency Control> on cpu2 est3: <Enhanced SpeedStep Frequency Control> on cpu3 Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 ugen2.1: <Intel EHCI root HUB> at usbus2 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 uhub2: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 uhub2: 21 ports with 21 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered ugen0.2: <Logitech USB Receiver> at usbus0 ukbd0 on uhub2 ukbd0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0 kbd2 at ukbd0 uhid0 on uhub2 uhid0: <Logitech USB Receiver, class 0/0, rev 2.00/12.03, addr 1> on usbus0 ugen1.2: <vendor 0x8087 product 0x8008> at usbus1 uhub3 on uhub0 uhub3: <vendor 0x8087 product 0x8008, class 9/0, rev 2.00/0.04, addr 2> on usbus1 ugen2.2: <vendor 0x8087 product 0x8000> at usbus2 uhub4 on uhub1 uhub4: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus2 uhub3: 6 ports with 6 removable, self powered uhub4: 8 ports with 8 removable, self powered ses0 at ahciem0 bus 0 scbus2 target 0 lun 0 cd0 at ahcich0 bus 0 scbus0 target 0 lun 0 ses0: <AHCI SGPIO Enclosure 2.00 0001> SEMB S-E-S 2.00 device cd0: <HL-DT-ST DVD-RAM GHC0N MA01> Removable CD-ROM SCSI device cd0: Serial Number K7HF97I3920 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytesses0: SEMB SES Device ) cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed ses0: pass0,cd0 in 'Slot 00', SATA Slot: scbus0 target 0 ada0 at ahcich3 bus 0 scbus1 target 0 lun 0 ada0: <ST3250318AS CC45> ATA8-ACS SATA 2.x device ada0: Serial Number 9VY8JVNA ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes) ada0: Command Queueing enabled ada0: 238418MB (488281250 512 byte sectors) ses0: pass1,ada0 in 'Slot 03', SATA Slot: scbus1 target 0 Trying to mount root from ufs:/dev/ufsid/5ff3baa829f19241 [rw,noatime]... random: unblocking device. CPU: Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz (3292.44-MHz K8-class CPU) Origin="GenuineIntel" Id=0x306c3 Family=0x6 Model=0x3c Stepping=3 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> Structured Extended Features3=0x9c000400<MD_CLEAR,IBPB,STIBP,L1DFL,SSBD> XSAVE Features=0x1<XSAVEOPT> VT-x: (disabled in BIOS) PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics
-
I have actually found my solution to this issue.
https://forum.netgate.com/topic/133536/official-realtek-driver-v1-95-binary
-
Hi Sir,
Same issue here with the Realtek TG-3468 Chipset on a NIC we just bought last week. Has this been addressed in 2.5.0?
-
The package is in the 2.5.0 repo so you can do this: https://forum.netgate.com/post/946519
Steve