Help required for a simple QoS setup

NinthWave

I recently migrated from DD-WRT to pfSense and installed most popular packages with success but I must say that setting traffic shaping is quite a challenge for a noob in this matter.

I have a Videotron cable 100/30 connection which has very bad bufferbloat behavior w/o any QoS setup.

I have done those exact settings:

that solved the bufferbloat problems but sends a continuous error message in the console;

And I still have some problems with my generic (VoIP.ms) that I would like to solve before the wife decides to cancel the service :-)

I have read this:

And browsed this:

But honestly, I just don't know how to reconcile all those sources in something functional.

What I want to achieve with my cable 100/30 connection is:

low bufferbloat
LAN VoIP
LAN devices (2 PC, 2 Android TV box)
WLAN devices (2 iPads, 2 cell phones with WiFi calling)
1 gaming teenager
MS Teams meetings
1 streaming Android box

Can anyone help me finding my way ?

DaddyGo

@ninthwave said in Help required for a simple QoS setup:

Can anyone help me finding my way ?

Hi,

welcome in the team

try based on that:
https://forum.netgate.com/topic/138092/fq_codel-error-config_aqm-unable-to-configure-flowset-flowset-busy

NinthWave

@daddygo I tried the Wizard. Seems to be working. But still, if anyone has any input.

tman222

@ninthwave said in Help required for a simple QoS setup:

@daddygo I tried the Wizard. Seems to be working. But still, if anyone has any input.

Hi @NinthWave - have you tried the exact steps detailed in this post?

https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/815

If yes, are you still seeing issues?

Hope this helps.

NinthWave

@tman222 said in Help required for a simple QoS setup:

@ninthwave said in Help required for a simple QoS setup:

@daddygo I tried the Wizard. Seems to be working. But still, if anyone has any input.

Hi @NinthWave - have you tried the exact steps detailed in this post?

https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/815

If yes, are you still seeing issues?

Hope this helps.

I tried it yesterday but now, my upload vanishes to zero and dslreports stops.

I posted as a reply on the "playing with FQ-Codel" thread.

DaddyGo

@ninthwave said in Help required for a simple QoS setup:

dslreports stops.

look at this too:
nperf

https://www.nperf.com/

andresmorago

@ninthwave
I’m having exactly the same upload issues. I also reported them on that thread. https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/1045

I temporarily fixed that by multiplying the upload bandwidth parameter by 10.

NinthWave

@andresmorago said in Help required for a simple QoS setup:

@ninthwave
I’m having exactly the same upload issues. I also reported them on that thread. https://forum.netgate.com/topic/112527/playing-with-fq_codel-in-2-4/1045

I temporarily fixed that by multiplying the upload bandwidth parameter by 10.

Thanks for quoting me. Since my problem could not be resolved, I reverted back to using the wizard.

I will closely look at your thread to see if it finds any resolution.