Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    DHCP will not assign IP to iDrac

    Scheduled Pinned Locked Moved DHCP and DNS
    15 Posts 3 Posters 5.4k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • johnpozJ
      johnpoz LAYER 8 Global Moderator @Krieger
      last edited by johnpoz

      Do you see pfsense seeing a discover for it.. Can not assign an IP if does not see a discover.. This would be in the dhcpd log on pfsense.

      Setting a reservation isn't going to do anything - if pfsense never sees the discover.

      An intelligent man is sometimes forced to be drunk to spend time with his fools
      If you get confused: Listen to the Music Play
      Please don't Chat/PM me for help, unless mod related
      SG-4860 24.11 | Lab VMs 2.8, 24.11

      K 1 Reply Last reply Reply Quote 0
      • K
        Krieger @johnpoz
        last edited by

        @johnpoz It does not see the discover. I think the issue is coming from pfsense lan and iDrac being on the same interface seeing as I don't have a dedicated card. Not sure why this is happening though seeing as my buddy has an identical setup (same server, cpu, ram, install, etc.) and he doesn't have an issue.

        johnpozJ 1 Reply Last reply Reply Quote 0
        • johnpozJ
          johnpoz LAYER 8 Global Moderator @Krieger
          last edited by johnpoz

          @krieger said in DHCP will not assign IP to iDrac:

          pfsense lan and iDrac being on the same interface

          Huh?

          https://www.dell.com/support/manuals/en-us/poweredge-r320/r320ownersmanual/technical-specifications?guid=guid-94ca846e-ec6f-4b2f-a3de-dd38f8722fad&lang=en-us

          interface.png

          How about you post a picture of what you think is your idrac interface.

          drac.png

          An intelligent man is sometimes forced to be drunk to spend time with his fools
          If you get confused: Listen to the Music Play
          Please don't Chat/PM me for help, unless mod related
          SG-4860 24.11 | Lab VMs 2.8, 24.11

          K 1 Reply Last reply Reply Quote 0
          • K
            Krieger @johnpoz
            last edited by Krieger

            @johnpoz I currently do not have a dedicated idrac card. You need an iDrac enterprise license and the dedicated card in order to use item 3 in the picture. With iDrac express, it communicates on one of the ports in item 7. This is why you see (optional).

            You can read the difference between iDrac express and enterprise here: https://kb.netapp.com/Advice_and_Troubleshooting/Flash_Storage/SF_Series/What_is_the_difference_between_iDRAC_Express_and_iDRAC_Enterprise_and_how_to_configure%3F

            You can see there is no dedicated idrac card in this picture.

            dac8da9a-45a5-4836-97bd-1b7e66a26d9f-image.png

            1 Reply Last reply Reply Quote 0
            • DaddyGoD
              DaddyGo @Krieger
              last edited by DaddyGo

              @krieger said in DHCP will not assign IP to iDrac:

              I'm going to try the MAC-IP bind, that might help.

              you said (above) you see the MAC address of iDrac

              +++edit:
              plenty of servers work so that the IPMI is either redirected to a dedicated interface or LOM...
              ergo shouldn't be a problem if you have IPMI on LAN as well

              ++edit2:

              by the way, I remember from my Dell era that both the express and enterprise versions require an iDrac card

              the difference is that the enterprise ver. requires a license and has a dedicated port... (MGMT) like Cisco UCS series

              the express version does not have a dedicated port so it communicates through LOM

              sorry ๐Ÿ˜‰

              https://www.ebay.com/itm/New-Dell-2827M-Remote-Access-Card-iDRAC7-Express-R320-R420-R520-T320-T420-81RK6-/301089149895

              02576de4-4732-4ffd-9a71-9d09c82ffdc6-image.png

              Cats bury it so they can't see it!
              (You know what I mean if you have a cat)

              K 1 Reply Last reply Reply Quote 0
              • K
                Krieger @DaddyGo
                last edited by Krieger

                @daddygo Here is the mac address as can be seen on my unifi controller dashboad. Switch 24 port 11 is the same port on the switch as my pfsense lan.

                94e09479-1c19-4e65-afae-2a1a2701424b-image.png

                As you can see it does not have an IP.

                Here are the iDrac settings. The MAC as shown in iDrac is the same as the MAC shown in unifi. As you can see, DHCP is enabled.

                9f439726-7a76-4fe5-a28b-22ba4372235f-image.png

                0370dcae-a526-4d0c-868c-375c6da3c337-image.png

                Here is what I could find in logs. The MAC address in the logs is slightly different. Instead of 90:B1:1C:46:99:EB, it is 90:B1:1C:46:99:EA

                c4517fa3-dfb9-48c9-a8af-c73ea2903463-image.png

                johnpozJ DaddyGoD 2 Replies Last reply Reply Quote 0
                • johnpozJ
                  johnpoz LAYER 8 Global Moderator @Krieger
                  last edited by johnpoz

                  So you have pfsense running on this nic as VM? What I would do is make sure drac is using the other port of the nic. Which is odd that you show nic lom2 selected but it says lom1 ins active?

                  But if you put your drac on the other physical port.. Than what your pfsense is using then dhcp should work.

                  And yes the mac of the drac would have to be different than just the nic mac..

                  An intelligent man is sometimes forced to be drunk to spend time with his fools
                  If you get confused: Listen to the Music Play
                  Please don't Chat/PM me for help, unless mod related
                  SG-4860 24.11 | Lab VMs 2.8, 24.11

                  K 1 Reply Last reply Reply Quote 0
                  • K
                    Krieger @johnpoz
                    last edited by

                    @johnpoz Pfsense is on bare metal. There are only 2 nics on this machine right now. bge0(LOM1) is WAN. bge1(LOM2) is LAN. If I assign iDrac to LOM1(bge0) then I will be exposing it on my WAN, no bueno.

                    1 Reply Last reply Reply Quote 0
                    • DaddyGoD
                      DaddyGo @Krieger
                      last edited by DaddyGo

                      @krieger said in DHCP will not assign IP to iDrac:

                      Here is the mac address as can be seen on my unifi controller dashboad. Switch 24 port 11 is the same port on the switch as my pfsense lan.

                      MAC addresses are thus normal on the same port -:EA for LAN and :EB for BMC (small difference)
                      because the DHCP server is running on this physical port (LAN), pfSense cannot assign itself an IP address to a BMC (IPMI) on the same physical port, -since there are two MACs on one physical port

                      set a dedicated IP to the BMC, with setup iDrac F2
                      (the LAN port on pfSense is upstream when viewed from the switch - that is why UNIFI sees the MAC address of the BMC - the opposite cannot be true)

                      or but this is not a good solution (!) with the UNIFI DHCP server (if any... and L2+ or L3 capable the switch) assign only one IP to the BMC (in same range), but then you will have two servers on a subnet....
                      -I say not a good solution ๐Ÿ˜‰

                      +++edit:

                      The BMC, IPMI, etc usually assume out-of-band solutions for security reasons!!!

                      Cats bury it so they can't see it!
                      (You know what I mean if you have a cat)

                      johnpozJ 1 Reply Last reply Reply Quote 0
                      • johnpozJ
                        johnpoz LAYER 8 Global Moderator @DaddyGo
                        last edited by

                        @daddygo said in DHCP will not assign IP to iDrac:

                        The BMC, IPMI, etc usually assume out-of-band solutions for security reasons!!!

                        Exactly... Which is why if you do not have a dedicated port for this.. And your going to leverage one of the 2 ports you have.. Then 1 should be used for ipmi, and the other for whatever your normal traffic is on.

                        You would never put your ipmi stuff on the same network as normal devices.. This should be on your management vlan..

                        An intelligent man is sometimes forced to be drunk to spend time with his fools
                        If you get confused: Listen to the Music Play
                        Please don't Chat/PM me for help, unless mod related
                        SG-4860 24.11 | Lab VMs 2.8, 24.11

                        DaddyGoD 2 Replies Last reply Reply Quote 0
                        • DaddyGoD
                          DaddyGo @johnpoz
                          last edited by

                          @johnpoz said in DHCP will not assign IP to iDrac:

                          You would never put your ipmi stuff on the same network as normal devices..

                          Or on a separate internal network configured for MGMT (on different subnet), otherwise if someone penetrate into the LAN, from there is only one "spit" way to access network management

                          Cats bury it so they can't see it!
                          (You know what I mean if you have a cat)

                          1 Reply Last reply Reply Quote 0
                          • DaddyGoD
                            DaddyGo @johnpoz
                            last edited by

                            @johnpoz said in DHCP will not assign IP to iDrac:

                            Then 1 should be used for ipmi, and the other for whatever your normal traffic is on.

                            otherwise, this solution exists, called shared LOM

                            we use the Cisco UCS series this way, but the CIMC is on a VLAN - ALWAYS!!!

                            https://community.cisco.com/t5/unified-computing-system/ucs-cimc-shared-lom/td-p/1981952

                            and

                            https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/c/sw/gui/config/guide/1-2-1/b_Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_1/Cisco_UCS_C-Series_Servers_Integrated_Management_Controller_Configuration_Guide_1_2_1_chapter8.html

                            Cats bury it so they can't see it!
                            (You know what I mean if you have a cat)

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.