Changing VnStatd max bandwidth limits for specific interfaces in 2.4.5-RELEASE-p1
-
Is there anyway to increase the max bandwidth for specific interfaces in vnstatd config ?
I get a lot of :
Traffic rate for "bxe0" higher than set maximum 1000 Mbit (20s->2673868800, r7997004 t18446744069875518448, 64bit:0), syncing
this interface is running at 2.5gbps...
I see that editing /usr/local/etc/vnstat.conf to add the following is useless since the files gets recreated when the process restart but how or where shoud I specify these options ?
MaxBandwidth 0
or
MaxBWBxe0 0
-
@tlex going to bump this for visibility, same thing here with Intel x710l running 2.5gbps to modem
Traffic rate for "ixl1" higher than set maximum 1000 Mbit Monitoring (32): pfsync0 (1000 Mbit) pflog0 (1000 Mbit) ovpns4 (1000 Mbit) ovpnc7 (1000 Mbit) ovpnc6 (1000 Mbit) ovpnc5 (1000 Mbit) ovpnc3 (1000 Mbit) ovpnc2 (1000 Mbit) ovpnc1 (1000 Mbit) ixl3 (1000 Mbit) ixl2 (1000 Mbit) ixl1 (1000 Mbit) ixl0.90 (1000 Mbit) ixl0.80 (1000 Mbit) ixl0.70 (1000 Mbit) ixl0.60 (1000 Mbit) ixl0.50 (1000 Mbit) ixl0.40 (1000 Mbit) ixl0.30 (1000 Mbit) ixl0.20 (1000 Mbit) ixl0.14 (1000 Mbit) ixl0.120 (1000 Mbit) ixl0.12 (1000 Mbit) ixl0.11 (1000 Mbit) ixl0.10 (1000 Mbit) ixl0 (1000 Mbit) igb3 (1000 Mbit) igb2.13 (1000 Mbit) igb2 (1000 Mbit) igb1 (1000 Mbit) igb0 (1000 Mbit) enc0 (1000 Mbit)