21.02 Sudden lockup
-
Removed the public IP addresses, serial number and device ID from the output.
FreeBSD/arm (pfsense.local.lan) (ttyu0) Netgate SG-3100 - Serial: X - Netgate Device ID: X *** Welcome to Netgate pfSense Plus 21.02-RELEASE (arm) on pfsense *** WAN (wan) -> mvneta2 -> v4/DHCP4: X.X.X.X/22 v6/DHCP6: X:X:X:X:X:X:X:X/64/64 MGMT (lan) -> mvneta1 -> v4: 172.16.200.1/29 OPT1 (opt1) -> mvneta0 -> LAN (opt2) -> mvneta1.100 -> v4: 192.168.255.249/29 WIFI (opt3) -> mvneta1.10 -> v4: 192.168.10.1/28 v6/t6: X:X:X:X:X:X:X:X/64 GUEST (opt4) -> mvneta1.20 -> v4: 192.168.20.1/24 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell Enter an option: 5 Netgate pfSense Plus will reboot. This may take a few minutes, depending on your hardware. Do you want to proceed? Y/y: Reboot normally R/r: Reroot (Stop processes, remount disks, re-run startup sequence) Enter: Abort Enter an option: y Netgate pfSense Plus is rebooting now. Stopping package AWS VPC Wizard...done. Stopping package IPsec Profile Wizard...done. Stopping package acme...done. Stopping package nut...done. Stopping package pfBlockerNG-devel...done. Stopping /usr/local/etc/rc.d/pfb_dnsbl.sh...done. Stopping /usr/local/etc/rc.d/pfb_filter.sh...done. Stopping /usr/local/etc/rc.d/shutdown.nut.sh...done. Waiting (max 60 seconds) for system process `vnlru' to stop... done Waiting (max 60 seconds) for system process `syncer' to stop... Syncing disks, vnodes remaining... 2 1 0 done Waiting (max 60 seconds) for system thread `bufdaemon' to stop... done Waiting (max 60 seconds) for system thread `bufspacedaemon-0' to stop... done All buffers synced. Uptime: 1m48s Rebooting... BootROM - 1.73 Booting from SPI flash General initialization - Version: 1.0.0 AVS selection from EFUSE disabled (Skip reading EFUSE values) Overriding default AVS value to: 0x23 Detected Device ID 6820 High speed PHY - Version: 2.0 Init Customer board board SerDes lanes topology details: | Lane # | Speed| Type | ------------------------------| | 0 | 3 | SATA0 | | 1 | 5 | PCIe0 | | 2 | 3 | SATA1 | | 3 | 4 | SGMII2 | | 4 | 5 | PCIe1 | | 5 | 5 | USB3 HOST1 | ------------------------------- PCIe, Idx 0: detected no link PCIe, Idx 1: detected no link High speed PHY - Ended Successfully mv_ddr: mv_ddr-armada-17.06.1-g07f8294 (Aug 11 2017 - 13:12:46) DDR4 Training Sequence - Switching XBAR Window to FastPath Window mv_ddr: completed successfully BootROM: Image checksum verification PASSED __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-02873-g5e4ac3c (Aug 11 2017 - 13:12:40) Marvell version: devel-17.06.0 Board: Rogue-1 SoC: MV88F6820 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1600 [MHz] L2 @ 800 [MHz] TClock @ 250 [MHz] DDR4 @ 800 [MHz] DDR4 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 2 GiB MMC: mv_sdh: 0 DBG: Calling spi_flash_probe from env_relocate_spec() SF: Probing bus 0 cs 0 @ 20000000Hz mode 3 SF: Detected N25Q128 with page size 64 KiB, total 16 MiB PCI-e 0: Detected No Link. PCI-e 1: Detected No Link. USB2.0 0: Host Mode USB3.0 1: Host Mode Map: Code: 0x7fedc000:0x7ff975a8 BSS: 0x7ffef600 Stack: 0x7f4cbf20 Heap: 0x7f4cc000:0x7fedc000 U-Boot Environment: 0x00100000:0x00110000 (SPI) Board configuration detected: Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x00 | | egiga1 | RGMII | 0x01 | | egiga2 | SGMII | In-Band | egiga0 [PRIME], egiga1, egiga2 Hit any key to stop autoboot: 0 reading ubldr.bin 228648 bytes read in 8 ms (27.3 MiB/s) ## Starting application at 0x00200000 ... Consoles: U-Boot console Compatible U-Boot API signature found @0x7f4dc280 FreeBSD/armv6 U-Boot loader, Revision 1.2 (Tue Jul 10 10:26:23 EDT 2018 root@buildbot3) DRAM: 2048MB Number of U-Boot devices: 4 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=0 slice=<auto> partition=<auto>...disk0: read failed, error=1 Checking unit=1 slice=<auto> partition=<auto>...disk1: read failed, error=1 Checking unit=2 slice=<auto> partition=<auto>... good. Booting from disk2s2a: Loading /boot/defaults/loader.conf console comconsole is invalid! no valid consoles! Available consoles: uboot /boot/kernel/kernel text=0xa8d650 data=0x11d47b4 data=0x0+0x54000 syms=[0x4+0xa8f50+0x4+0xf377f] / Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/dtb/armada-385-80300-0148-G00-X100.dtb size=0x60ed Loaded DTB from file 'armada-385-80300-0148-G00-X100.dtb'. Kernel entry at 0x400180... Kernel args: (null) SOC: Marvell 88F6820, TClock 250MHz, Frequency 1600MHz Instruction cache prefetch enabled, data cache prefetch disabled ---<<BOOT>>--- Copyright (c) 1992-2020 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.2-STABLE 38a4c12973d(plus-devel-12) pfSense-SG-3100 arm FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) CPU: ARM Cortex-A9 r4p1 (ECO: 0x00000000) CPU Features: Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk Optional instructions: UMULL, SMULL, SIMD(ext) LoUU:2 LoC:2 LoUIS:2 Cache level 1: 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc 32KB/32B 4-way instruction cache Read-Alloc real memory = 2147479552 (2047 MB) avail memory = 2071031808 (1975 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs arc4random: no preloaded entropy cache ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc014deb0, 0) error 1 ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc014df60, 0) error 1 iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0156f50, 0) error 1 iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0157000, 0) error 1 iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc01570b0, 0) error 1 ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. module_register_init: MOD_LOAD (ipw_bss_fw, 0xc014de00, 0) error 1 wlan: mac acl policy registered random: entropy device external interface [ath_hal] loaded ofwbus0: <Open Firmware Device Tree> simplebus0: <Flattened device tree simple bus> on ofwbus0 simplebus1: <Flattened device tree simple bus> on simplebus0 l2cache0: <PL310 L2 cache controller> mem 0x8000-0x8fff on simplebus1 l2cache0: cannot allocate IRQ, not using interrupt l2cache0: Part number: 0x3, release: 0x9 l2cache0: L2 Cache enabled: 1024KB/32B 16 ways gic0: <ARM Generic Interrupt Controller> mem 0xd000-0xdfff,0xc100-0xc1ff on simplebus1 gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 192 mpic0: <Marvell Integrated Interrupt Controller> mem 0x20a00-0x20ccf,0x21070-0x210c7 irq 17 on simplebus1 gpio0: <Marvell Integrated GPIO Controller> mem 0x18100-0x1813f,0x181c0-0x181c7 irq 9,10,11,12 on simplebus1 gpio0: 4 IRQs available gpio0: Disable interrupts (offset = 0 + EDGE(0x18) gpio0: Disable interrupts (offset = 0 + LEV(0x1C)) gpio0: Setup intr 0 gpio0: Setup intr 1 gpio0: Setup intr 2 gpio0: Setup intr 3 gpio0: Clear int status (offset = 0) gpiobus0: <GPIO bus> on gpio0 gpio1: <Marvell Integrated GPIO Controller> mem 0x18140-0x1817f,0x181c8-0x181cf irq 13,14,15,16 on simplebus1 gpio1: 4 IRQs available gpio1: Disable interrupts (offset = 0 + EDGE(0x18) gpio1: Disable interrupts (offset = 0 + LEV(0x1C)) gpio1: Setup intr 0 gpio1: Setup intr 1 gpio1: Setup intr 2 gpio1: Setup intr 3 gpio1: Clear int status (offset = 0) gpiobus1: <GPIO bus> on gpio1 mp_tmr0: <ARM MPCore Timers> mem 0xc200-0xc21f irq 3 on simplebus1 Timecounter "MPCore" frequency 800000000 Hz quality 800 mp_tmr1: <ARM MPCore Timers> mem 0xc600-0xc61f irq 4 on simplebus1 Event timer "MPCore" frequency 800000000 Hz quality 1000 twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 5 on simplebus1 iicbus0: <OFW I2C bus> on twsi0 iic0: <I2C generic I/O> on iicbus0 gpio2: <NXP PCA9552 LED driver> at addr 0xc0 on iicbus0 device_attach: gpio2 attach returned 6 gpio2: <ISSI IS31FL3199 9 channel light effect LED driver> at addr 0xce on iicbus0 gpiobus2: <OFW GPIO bus> on gpio2 gpioc2: <GPIO controller> on gpio2 uart0: <16550 or compatible> mem 0x12000-0x120ff irq 7 on simplebus1 uart0: console (-1,n,8,1) uart1: <16550 or compatible> mem 0x12100-0x121ff irq 8 on simplebus1 gpioc0: <GPIO controller> on gpio0 gpioc1: <GPIO controller> on gpio1 wdt0: <Marvell Watchdog Timer> mem 0x20300-0x20333,0x20704-0x20707,0x18260-0x18263 irq 24,25 on simplebus1 pmsu0: <Power Management Service Unit> mem 0x22000-0x22fff on simplebus1 mvneta0: <NETA controller> mem 0x30000-0x33fff irq 26 on simplebus1 mvneta0: version is 10 mvneta0: Ethernet address: 00:08:a2:0c:c4:1b miibus0: <MII bus> on mvneta0 mv88e151x0: <Marvell 88E1512 Gigabit PHY> PHY 1 on miibus0 mv88e151x0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseSX, 1000baseSX-FDX, auto mvneta1: <NETA controller> mem 0x34000-0x37fff irq 27 on simplebus1 mvneta1: version is 10 mvneta1: Ethernet address: 00:08:a2:0c:c4:1c mdio0: <MDIO> on mvneta1 e6000sw0: <Marvell 88E6141> on mdio0 e6000sw0: single-chip addressing mode e6000sw0: PHY at port 1 miibus1: <MII bus> on e6000sw0 e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus1 e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 2 miibus2: <MII bus> on e6000sw0 e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus2 e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 3 miibus3: <MII bus> on e6000sw0 e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus3 e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: PHY at port 4 miibus4: <MII bus> on e6000sw0 e1000phy3: <Marvell 88E1000 Gigabit PHY> PHY 20 on miibus4 e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto e6000sw0: CPU port at 5 e6000sw0: fixed port at 5 e6000sw0: switch is ready. etherswitch0: <Switch controller> on e6000sw0 mvneta2: <NETA controller> mem 0x70000-0x73fff irq 28 on simplebus1 mvneta2: version is 10 mvneta2: Ethernet address: 00:08:a2:0c:c4:1d miibus5: <MII bus> on mvneta2 mv88e151x1: <Marvell 88E1512 Gigabit PHY> PHY 0 on miibus5 mv88e151x1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseSX, 1000baseSX-FDX, auto ehci0: <Marvell Integrated USB 2.0 controller> mem 0x58000-0x584ff irq 29 on simplebus1 usbus0: EHCI version 1.0 usbus0 on ehci0 cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 30,31 on simplebus1 rtc0: <Marvell Integrated RTC> mem 0xa3800-0xa381f,0x184a0-0x184ab irq 32 on simplebus1 rtc0: registered as a time-of-day clock, resolution 1.000000s ahci0: <Marvell AHCI Controller> mem 0xa8000-0xa9fff irq 33 on simplebus1 ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS ahci0: quirks=0x200010<2CH,MRVL_SR_DEL> ahcich0: <AHCI channel> at channel 0 on ahci0 ahcich1: <AHCI channel> at channel 1 on ahci0 armada_thermal0: <Armada380 Thermal Control> mem 0xe4078-0xe407b,0xe4070-0xe4077 on simplebus1 sdhci_fdt0: <ARMADA38X SDHCI controller> mem 0xd8000-0xd8fff,0xdc000-0xdc0ff,0x18454-0x18457 irq 36 on simplebus1 sdhci_fdt0: 1 slot(s) allocated xhci0: <Marvell Integrated USB 3.0 controller> mem 0xf8000-0xfbfff,0xfc000-0xfffff irq 38 on simplebus1 xhci0: 32 bytes context size, 32-bit DMA usbus1 on xhci0 cesa1: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 39,40 on simplebus1 spi0: <Marvell SPI controller> mem 0xf001000000010600-0xf00100000001064f irq 1 on simplebus0 cpulist0: <Open Firmware CPU Group> on ofwbus0 cpu0: <Open Firmware CPU> on cpulist0 cpu1: <Open Firmware CPU> on cpulist0 cryptosoft0: <software crypto> Timecounters tick every 1.000 msec mvneta1: link state changed to UP spibus0: <OFW SPI bus> on spi0 mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 mx25l0: device type n25q128, size 16384K in 256 sectors of 64K, erase size 4K Release APs e6000sw0port1: link state changed to DOWN usbus0: e6000sw0port2: link state changed to DOWN 480Mbps High Speed USB v2.0 e6000sw0port3: link state changed to DOWN usbus1: e6000sw0port4: link state changed to DOWN 5.0Gbps Super Speed USB v3.0 ugen0.1: <Marvell EHCI root HUB> at usbus0 uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 ugen1.1: <Marvell XHCI root HUB> at usbus1 uhub1: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 arc4random: no preloaded entropy cache Trying to mount root from ufs:/dev/diskid/DISK-D4EC8498s2a [rw,noatime]... Root mount waiting for: usbus0 CAM usbus1 uhub1: 2 ports with 2 removable, self powered mmc0: <MMC/SD bus> on sdhci_fdt0 mmcsd0: 8GB <MMCHC 008GE0 0.0 SN D4EC8498 MFG 06/2015 by 17 0x0000> at mmc0 50.0MHz/8bit/65535-block mmcsd0boot0: 4MB partition 1 at mmcsd0 mmcsd0boot1: 4MB partition 2 at mmcsd0 mmcsd0rpmb: 4MB partition 3 at mmcsd0 uhub0: 1 port with 1 removable, self powered ugen1.2: <INNO TECH USB to Serial> at usbus1 e6000sw0port2: link state changed to UP Root mount waiting for: CAM Root mount waiting for:e6000sw0port1: link state changed to UP CAMe6000sw0port3: link state changed to UP e6000sw0port4: link state changed to UP Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM Root mount waiting for: CAM mountroot: waiting for device /dev/diskid/DISK-D4EC8498s2a... Configuring crash dumps... No suitable dump device was found. /dev/diskid/DISK-D4EC8498s2a: FILE SYSTEM CLEAN; SKIPPING CHECKS /dev/diskid/DISK-D4EC8498s2a: clean, 1516070 free (1078 frags, 189374 blocks, 0.1% fragmentation) Filesystems are clean, continuing... Mounting filesystems... random: unblocking device. __ _ __ / _|___ ___ _ __ ___ ___ _ | '_ \| |_/ __|/ _ \ '_ \/ __|/ _ \ _| |_ | |_) | _\__ \ __/ | | \__ \ __/ |_ _| | .__/|_| |___/\___|_| |_|___/\___| |_| |_| Welcome to Netgate pfSense Plus 21.02-RELEASE... ...ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/lib/engines /usr/local/lib/compat/pkg /usr/local/lib/ipsec /usr/local/lib/perl5/5.32/mach/CORE Soft Float compatibility ldconfig path: done. External config loader 1.0 is now starting... Launching the init system....... done. Initializing.................... done. Starting device manager (devd)...done. Loading configuration......done. Updating configuration...done. Checking config backups consistency.................................done. Setting up extended sysctls...done. Setting timezone...done. Configuring looplo0: link state changed to UP back interface...done. Starting syslog...done. Starting Secure Shell Services...done. Configuring switch...done. Setting up interfaces microcode...done. Starting PC/SC Smart Card Services...done. Configuring loopback interface...done. Creating wireless clone interfaces...done. Configuring LAGG interfaces...done. Configuring VLAN interfaces...done. Configuring QinQ interfaces...done. Configuring IPsec VTI interfaces...done. Configuring WAN interface...done. Configuring MGMT interface...done. Configuring LAN interface...done. Configuring GUEST interface...done. Configuring WIFI interface...done. Configuring WAN interface...done. Configuring CARP settings...done. Syncing OpenVPN settings...done. Configuring firewall.Segmentation fault (core dumped) Starting CRON... done. Starting package AWS VPC Wizard...done. Starting package IPsec Profile Wizard...done. Starting package acme...done. Starting package nut...done. Starting package pfBlockerNG-devel...done. Starting /usr/local/etc/rc.d/pfb_dnsbl.sh...done. Starting /usr/local/etc/rc.d/pfb_filter.sh...done. Starting /usr/local/etc/rc.d/shutdown.nut.sh...done. Netgate pfSense Plus 21.02-RELEASE arm Tue Feb 16 08:56:55 EST 2021 Bootup complete FreeBSD/arm (pfsense.local.lan) (ttyu0) Netgate SG-3100 - Serial: X - Netgate Device ID: X *** Welcome to Netgate pfSense Plus 21.02-RELEASE (arm) on pfsense *** WAN (wan) -> mvneta2 -> v4/DHCP4: X.X.X.X/X v6/DHCP6: X:X:X:X:X:X:X:X/64 MGMT (lan) -> mvneta1 -> v4: 172.16.200.1/29 OPT1 (opt1) -> mvneta0 -> LAN (opt2) -> mvneta1.100 -> v4: 192.168.255.249/29 WIFI (opt3) -> mvneta1.10 -> v4: 192.168.10.1/28 v6/t6: X:X:X:X:X:X:X:X/64 GUEST (opt4) -> mvneta1.20 -> v4: 192.168.20.1/24 0) Logout (SSH only) 9) pfTop 1) Assign Interfaces 10) Filter Logs 2) Set interface(s) IP address 11) Restart webConfigurator 3) Reset webConfigurator password 12) PHP shell + Netgate pfSense Plus tools 4) Reset to factory defaults 13) Update from console 5) Reboot system 14) Disable Secure Shell (sshd) 6) Halt system 15) Restore recent configuration 7) Ping host 16) Restart PHP-FPM 8) Shell -
System logs:
Feb 18 15:42:17 php 366 rc.bootup: calling interface_dhcpv6_configure. Feb 18 15:42:17 php 366 rc.bootup: Accept router advertisements on interface mvneta2 Feb 18 15:42:17 php 366 rc.bootup: Starting rtsold process Feb 18 15:42:21 php 366 rc.bootup: calling interface_dhcpv6_configure. Feb 18 15:42:21 php 366 rc.bootup: Accept router advertisements on interface mvneta2 Feb 18 15:42:21 php 366 rc.bootup: Killing running rtsold process Feb 18 15:42:23 php 366 rc.bootup: Starting rtsold process Feb 18 15:42:25 php 366 rc.bootup: The command '/usr/sbin/rtsold -1 -p /var/run/rtsold_mvneta2.pid -M /var/etc/rtsold_mvneta2_script.sh -O /var/etc/rtsold_mvneta2_script.sh mvneta2' returned exit code '1', the output was 'rtsold: failed to open pidfile: File exists' Feb 18 15:42:25 php 366 rc.bootup: Resyncing OpenVPN instances.Feb 18 15:42:39 kernel pid 366 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped)
-
@mcury I think we have a misunderstanding. I need the USB Serial console output for the device when a lock up occurs. Not the system logs.
-
@kphillips I came here looking for solutions to the same crashing behavior after upgrading today. I uninstalled pfblockerNG, and while it ran longer (~20 min vs 3-5min) it still "crashed". With the serial cable connected and viewing the console in putty, there is no output when it becomes unreachable. It IS still reachable via the console but nothing else is happening.
-
@kphillips Hm, this is what I have, no more logs to provide you unfortunately, pfsense no longer responds, and to access the GUI, I have to Restart the webConfigurator, disable pfblocker, and restart..
Doing so, Internet works, GUI responds, normal usage. -
@mcury Can you attach a USB cable to the firewall and see what the USB console is doing?
Instructions for doing so can be found here:
https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/connect-to-console.htmlEven if the webConfigurator is locked up, this should always respond.
-
I am in the same boat as many here. SG-3100 sudden lockup after upgrade with no console output.
I am guessing a kernel panic as I am unable to see anything via serial console or logs. -
@kphillips That log is from the console, connected through USB cable to pfsense, using putty serial. The problem start exactly here when configuring Firewall as per below, boot proceeds to the end, but GUI and Internet don't work.
As per mentioned above, I have to restart the GUI through the console with the option 11, disable pfblockerng and reboot, then everything works.Syncing OpenVPN settings...done.
Configuring firewall.Segmentation fault (core dumped) <<<
Starting CRON... done. -
@kphillips It shows nothing for me.
I cant even get to the console. This is why I suspect a kernel panic. -
@mcury Can you provide the full output instead of just the provided snippet? I need everything, not just a chunk, to provide to our devs.
-
@kphillips Sure, but now you are asking for the system log, right?
Because the console output is complete there, from the boot start to finish, ok? -
@kphillips The last few posts in this thread point to pfBlockerNG as a possible culprit. I have been running since noon yesterday with pfBlockerNG. I was also running Snort, but as reported in a previous message, it aborted just after midnight. Other than the fact that Snort isn't running, pfsense seems to be functioning correctly. I'd reboot and connect to the console, but I have a whole lot of people in Zoom calls who will kill me if I disrupt what they're doing.
-
@rloeb I have neither PFBlocker or Snort packages installed and I am also impacted by this freezing WAN/LAN issue on my SG3100.
-
Confirms what I was trying to say. This is broader than an app.
-
@rloeb Our engineers have a half dozen different SG-3100s in various configurations running non-stop on 21.02. None of them have experienced lockups yet, so we're still trying to track down what is unique here. Full console output from a frozen device would be helpful.
-
@kphillips Kindly check and advise if this log can help you, or if is there something else that I can do
Feb 18 15:42:16 kernel ---<<BOOT>>--- Feb 18 15:42:16 kernel Copyright (c) 1992-2020 The FreeBSD Project. Feb 18 15:42:16 kernel Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Feb 18 15:42:16 kernel The Regents of the University of California. All rights reserved. Feb 18 15:42:16 kernel FreeBSD is a registered trademark of The FreeBSD Foundation. Feb 18 15:42:16 kernel FreeBSD 12.2-STABLE 38a4c12973d(plus-devel-12) pfSense-SG-3100 arm Feb 18 15:42:16 kernel FreeBSD clang version 10.0.1 (git@github.com:llvm/llvm-project.git llvmorg-10.0.1-0-gef32c611aa2) Feb 18 15:42:16 kernel CPU: ARM Cortex-A9 r4p1 (ECO: 0x00000000) Feb 18 15:42:16 kernel CPU Features: Feb 18 15:42:16 kernel Multiprocessing, Thumb2, Security, VMSAv7, Coherent Walk Feb 18 15:42:16 kernel Optional instructions: Feb 18 15:42:16 kernel UMULL, SMULL, SIMD(ext) Feb 18 15:42:16 kernel LoUU:2 LoC:2 LoUIS:2 Feb 18 15:42:16 kernel Cache level 1: Feb 18 15:42:16 kernel 32KB/32B 4-way data cache WB Read-Alloc Write-Alloc Feb 18 15:42:16 kernel 32KB/32B 4-way instruction cache Read-Alloc Feb 18 15:42:16 kernel real memory = 2147479552 (2047 MB) Feb 18 15:42:16 kernel avail memory = 2071031808 (1975 MB) Feb 18 15:42:16 kernel FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs Feb 18 15:42:16 kernel arc4random: no preloaded entropy cache Feb 18 15:42:16 kernel ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Feb 18 15:42:16 kernel ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc014deb0, 0) error 1 Feb 18 15:42:16 kernel ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Feb 18 15:42:16 kernel ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc014df60, 0) error 1 Feb 18 15:42:16 kernel iwi_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Feb 18 15:42:16 kernel iwi_bss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (iwi_bss_fw, 0xc0156f50, 0) error 1 Feb 18 15:42:16 kernel iwi_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Feb 18 15:42:16 kernel iwi_ibss: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (iwi_ibss_fw, 0xc0157000, 0) error 1 Feb 18 15:42:16 kernel iwi_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_iwi.LICENSE. Feb 18 15:42:16 kernel iwi_monitor: If you agree with the license, set legal.intel_iwi.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (iwi_monitor_fw, 0xc01570b0, 0) error 1 Feb 18 15:42:16 kernel ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw.LICENSE. Feb 18 15:42:16 kernel ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf. Feb 18 15:42:16 kernel module_register_init: MOD_LOAD (ipw_bss_fw, 0xc014de00, 0) error 1 Feb 18 15:42:16 kernel wlan: mac acl policy registered Feb 18 15:42:16 kernel random: entropy device external interface Feb 18 15:42:16 kernel [ath_hal] loaded Feb 18 15:42:16 kernel ofwbus0: <Open Firmware Device Tree> Feb 18 15:42:16 kernel simplebus0: <Flattened device tree simple bus> on ofwbus0 Feb 18 15:42:16 kernel simplebus1: <Flattened device tree simple bus> on simplebus0 Feb 18 15:42:16 kernel l2cache0: <PL310 L2 cache controller> mem 0x8000-0x8fff on simplebus1 Feb 18 15:42:16 kernel l2cache0: cannot allocate IRQ, not using interrupt Feb 18 15:42:16 kernel l2cache0: Part number: 0x3, release: 0x9 Feb 18 15:42:16 kernel l2cache0: L2 Cache enabled: 1024KB/32B 16 ways Feb 18 15:42:16 kernel gic0: <ARM Generic Interrupt Controller> mem 0xd000-0xdfff,0xc100-0xc1ff on simplebus1 Feb 18 15:42:16 kernel gic0: pn 0x39, arch 0x1, rev 0x2, implementer 0x43b irqs 192 Feb 18 15:42:16 kernel mpic0: <Marvell Integrated Interrupt Controller> mem 0x20a00-0x20ccf,0x21070-0x210c7 irq 17 on simplebus1 Feb 18 15:42:16 kernel gpio0: <Marvell Integrated GPIO Controller> mem 0x18100-0x1813f,0x181c0-0x181c7 irq 9,10,11,12 on simplebus1 Feb 18 15:42:16 kernel gpio0: 4 IRQs available Feb 18 15:42:16 kernel gpio0: Disable interrupts (offset = 0 + EDGE(0x18) Feb 18 15:42:16 kernel gpio0: Disable interrupts (offset = 0 + LEV(0x1C)) Feb 18 15:42:16 kernel gpio0: Setup intr 0 Feb 18 15:42:16 kernel gpio0: Setup intr 1 Feb 18 15:42:16 kernel gpio0: Setup intr 2 Feb 18 15:42:16 kernel gpio0: Setup intr 3 Feb 18 15:42:16 kernel gpio0: Clear int status (offset = 0) Feb 18 15:42:16 kernel gpiobus0: <GPIO bus> on gpio0 Feb 18 15:42:16 kernel gpio1: <Marvell Integrated GPIO Controller> mem 0x18140-0x1817f,0x181c8-0x181cf irq 13,14,15,16 on simplebus1 Feb 18 15:42:16 kernel gpio1: 4 IRQs available Feb 18 15:42:16 kernel gpio1: Disable interrupts (offset = 0 + EDGE(0x18) Feb 18 15:42:16 kernel gpio1: Disable interrupts (offset = 0 + LEV(0x1C)) Feb 18 15:42:16 kernel gpio1: Setup intr 0 Feb 18 15:42:16 kernel gpio1: Setup intr 1 Feb 18 15:42:16 kernel gpio1: Setup intr 2 Feb 18 15:42:16 kernel gpio1: Setup intr 3 Feb 18 15:42:16 kernel gpio1: Clear int status (offset = 0) Feb 18 15:42:16 kernel gpiobus1: <GPIO bus> on gpio1 Feb 18 15:42:16 kernel mp_tmr0: <ARM MPCore Timers> mem 0xc200-0xc21f irq 3 on simplebus1 Feb 18 15:42:16 kernel Timecounter "MPCore" frequency 800000000 Hz quality 800 Feb 18 15:42:16 kernel mp_tmr1: <ARM MPCore Timers> mem 0xc600-0xc61f irq 4 on simplebus1 Feb 18 15:42:16 kernel Event timer "MPCore" frequency 800000000 Hz quality 1000 Feb 18 15:42:16 kernel twsi0: <Marvell Integrated I2C Bus Controller> mem 0x11000-0x1101f irq 5 on simplebus1 Feb 18 15:42:16 kernel iicbus0: <OFW I2C bus> on twsi0 Feb 18 15:42:16 kernel iic0: <I2C generic I/O> on iicbus0 Feb 18 15:42:16 kernel gpio2: <NXP PCA9552 LED driver> at addr 0xc0 on iicbus0 Feb 18 15:42:16 kernel device_attach: gpio2 attach returned 6 Feb 18 15:42:16 kernel gpio2: <ISSI IS31FL3199 9 channel light effect LED driver> at addr 0xce on iicbus0 Feb 18 15:42:16 kernel gpiobus2: <OFW GPIO bus> on gpio2 Feb 18 15:42:16 kernel gpioc2: <GPIO controller> on gpio2 Feb 18 15:42:16 kernel uart0: <16550 or compatible> mem 0x12000-0x120ff irq 7 on simplebus1 Feb 18 15:42:16 kernel uart0: console (-1,n,8,1) Feb 18 15:42:16 kernel uart1: <16550 or compatible> mem 0x12100-0x121ff irq 8 on simplebus1 Feb 18 15:42:16 kernel gpioc0: <GPIO controller> on gpio0 Feb 18 15:42:16 kernel gpioc1: <GPIO controller> on gpio1 Feb 18 15:42:16 kernel wdt0: <Marvell Watchdog Timer> mem 0x20300-0x20333,0x20704-0x20707,0x18260-0x18263 irq 24,25 on simplebus1 Feb 18 15:42:16 kernel pmsu0: <Power Management Service Unit> mem 0x22000-0x22fff on simplebus1 Feb 18 15:42:16 kernel mvneta0: <NETA controller> mem 0x30000-0x33fff irq 26 on simplebus1 Feb 18 15:42:16 kernel mvneta0: version is 10 Feb 18 15:42:16 kernel mvneta0: Ethernet address: 00:08:a2:0c:c4:1b Feb 18 15:42:16 kernel miibus0: <MII bus> on mvneta0 Feb 18 15:42:16 kernel mv88e151x0: <Marvell 88E1512 Gigabit PHY> PHY 1 on miibus0 Feb 18 15:42:16 kernel mv88e151x0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseSX, 1000baseSX-FDX, auto Feb 18 15:42:16 kernel mvneta1: <NETA controller> mem 0x34000-0x37fff irq 27 on simplebus1 Feb 18 15:42:16 kernel mvneta1: version is 10 Feb 18 15:42:16 kernel mvneta1: Ethernet address: 00:08:a2:0c:c4:1c Feb 18 15:42:16 kernel mdio0: <MDIO> on mvneta1 Feb 18 15:42:16 kernel e6000sw0: <Marvell 88E6141> on mdio0 Feb 18 15:42:16 kernel e6000sw0: single-chip addressing mode Feb 18 15:42:16 kernel e6000sw0: PHY at port 1 Feb 18 15:42:16 kernel miibus1: <MII bus> on e6000sw0 Feb 18 15:42:16 kernel e1000phy0: <Marvell 88E1000 Gigabit PHY> PHY 17 on miibus1 Feb 18 15:42:16 kernel e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Feb 18 15:42:16 kernel e6000sw0: PHY at port 2 Feb 18 15:42:16 kernel miibus2: <MII bus> on e6000sw0 Feb 18 15:42:16 kernel e1000phy1: <Marvell 88E1000 Gigabit PHY> PHY 18 on miibus2 Feb 18 15:42:16 kernel e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Feb 18 15:42:16 kernel e6000sw0: PHY at port 3 Feb 18 15:42:16 kernel miibus3: <MII bus> on e6000sw0 Feb 18 15:42:16 kernel e1000phy2: <Marvell 88E1000 Gigabit PHY> PHY 19 on miibus3 Feb 18 15:42:16 kernel e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Feb 18 15:42:16 kernel e6000sw0: PHY at port 4 Feb 18 15:42:16 kernel miibus4: <MII bus> on e6000sw0 Feb 18 15:42:16 kernel e1000phy3: <Marvell 88E1000 Gigabit PHY> PHY 20 on miibus4 Feb 18 15:42:16 kernel e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto Feb 18 15:42:16 kernel e6000sw0: CPU port at 5 Feb 18 15:42:16 kernel e6000sw0: fixed port at 5 Feb 18 15:42:16 kernel e6000sw0: switch is ready. Feb 18 15:42:16 kernel etherswitch0: <Switch controller> on e6000sw0 Feb 18 15:42:16 kernel mvneta2: <NETA controller> mem 0x70000-0x73fff irq 28 on simplebus1 Feb 18 15:42:16 kernel mvneta2: version is 10 Feb 18 15:42:16 kernel mvneta2: Ethernet address: 00:08:a2:0c:c4:1d Feb 18 15:42:16 kernel miibus5: <MII bus> on mvneta2 Feb 18 15:42:16 kernel mv88e151x1: <Marvell 88E1512 Gigabit PHY> PHY 0 on miibus5 Feb 18 15:42:16 kernel mv88e151x1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseSX, 1000baseSX-FDX, auto Feb 18 15:42:16 kernel ehci0: <Marvell Integrated USB 2.0 controller> mem 0x58000-0x584ff irq 29 on simplebus1 Feb 18 15:42:16 kernel usbus0: EHCI version 1.0 Feb 18 15:42:16 kernel usbus0 on ehci0 Feb 18 15:42:16 kernel cesa0: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 30,31 on simplebus1 Feb 18 15:42:16 kernel rtc0: <Marvell Integrated RTC> mem 0xa3800-0xa381f,0x184a0-0x184ab irq 32 on simplebus1 Feb 18 15:42:16 kernel rtc0: registered as a time-of-day clock, resolution 1.000000s Feb 18 15:42:16 kernel ahci0: <Marvell AHCI Controller> mem 0xa8000-0xa9fff irq 33 on simplebus1 Feb 18 15:42:16 kernel ahci0: AHCI v1.00 with 2 6Gbps ports, Port Multiplier supported with FBS Feb 18 15:42:16 kernel ahci0: quirks=0x200010<2CH,MRVL_SR_DEL> Feb 18 15:42:16 kernel ahcich0: <AHCI channel> at channel 0 on ahci0 Feb 18 15:42:16 kernel ahcich1: <AHCI channel> at channel 1 on ahci0 Feb 18 15:42:16 kernel armada_thermal0: <Armada380 Thermal Control> mem 0xe4078-0xe407b,0xe4070-0xe4077 on simplebus1 Feb 18 15:42:16 kernel sdhci_fdt0: <ARMADA38X SDHCI controller> mem 0xd8000-0xd8fff,0xdc000-0xdc0ff,0x18454-0x18457 irq 36 on simplebus1 Feb 18 15:42:16 kernel sdhci_fdt0: 1 slot(s) allocated Feb 18 15:42:16 kernel xhci0: <Marvell Integrated USB 3.0 controller> mem 0xf8000-0xfbfff,0xfc000-0xfffff irq 38 on simplebus1 Feb 18 15:42:16 kernel xhci0: 32 bytes context size, 32-bit DMA Feb 18 15:42:16 kernel usbus1 on xhci0 Feb 18 15:42:16 kernel cesa1: <Marvell Cryptographic Engine and Security Accelerator> mem 0x90000-0x9ffff irq 39,40 on simplebus1 Feb 18 15:42:16 kernel spi0: <Marvell SPI controller> mem 0xf001000000010600-0xf00100000001064f irq 1 on simplebus0 Feb 18 15:42:16 kernel cpulist0: <Open Firmware CPU Group> on ofwbus0 Feb 18 15:42:16 kernel cpu0: <Open Firmware CPU> on cpulist0 Feb 18 15:42:16 kernel cpu1: <Open Firmware CPU> on cpulist0 Feb 18 15:42:16 kernel cryptosoft0: <software crypto> Feb 18 15:42:16 kernel Timecounters tick every 1.000 msec Feb 18 15:42:16 kernel mvneta1: link state changed to UP Feb 18 15:42:16 kernel spibus0: <OFW SPI bus> on spi0 Feb 18 15:42:16 kernel mx25l0: <M25Pxx Flash Family> at cs 0 mode 0 on spibus0 Feb 18 15:42:16 kernel mx25l0: device type n25q128, size 16384K in 256 sectors of 64K, erase size 4K Feb 18 15:42:16 kernel Release APs Feb 18 15:42:16 kernel e6000sw0port1: link state changed to DOWN Feb 18 15:42:16 kernel usbus0: Feb 18 15:42:16 kernel e6000sw0port2: link state changed to DOWN Feb 18 15:42:16 kernel 480Mbps High Speed USB v2.0 Feb 18 15:42:16 kernel e6000sw0port3: link state changed to DOWN Feb 18 15:42:16 kernel usbus1: Feb 18 15:42:16 kernel e6000sw0port4: link state changed to DOWN Feb 18 15:42:16 kernel 5.0Gbps Super Speed USB v3.0 Feb 18 15:42:16 kernel ugen0.1: <Marvell EHCI root HUB> at usbus0 Feb 18 15:42:16 kernel uhub0: <Marvell EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0 Feb 18 15:42:16 kernel ugen1.1: <Marvell XHCI root HUB> at usbus1 Feb 18 15:42:16 kernel uhub1: <Marvell XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1 Feb 18 15:42:16 kernel arc4random: no preloaded entropy cache Feb 18 15:42:16 kernel Trying to mount root from ufs:/dev/diskid/DISK-D4EC8498s2a [rw,noatime]... Feb 18 15:42:16 kernel Root mount waiting for: usbus0 CAM usbus1 Feb 18 15:42:16 kernel uhub1: 2 ports with 2 removable, self powered Feb 18 15:42:16 kernel mmc0: <MMC/SD bus> on sdhci_fdt0 Feb 18 15:42:16 kernel mmcsd0: 8GB <MMCHC 008GE0 0.0 SN D4EC8498 MFG 06/2015 by 17 0x0000> at mmc0 50.0MHz/8bit/65535-block Feb 18 15:42:16 kernel mmcsd0boot0: 4MB partition 1 at mmcsd0 Feb 18 15:42:16 kernel mmcsd0boot1: 4MB partition 2 at mmcsd0 Feb 18 15:42:16 kernel mmcsd0rpmb: 4MB partition 3 at mmcsd0 Feb 18 15:42:16 kernel uhub0: 1 port with 1 removable, self powered Feb 18 15:42:16 kernel ugen1.2: <INNO TECH USB to Serial> at usbus1 Feb 18 15:42:16 kernel e6000sw0port2: link state changed to UP Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: Feb 18 15:42:16 kernel e6000sw0port1: link state changed to UP Feb 18 15:42:16 kernel CAM Feb 18 15:42:16 kernel e6000sw0port3: link state changed to UP Feb 18 15:42:16 kernel e6000sw0port4: link state changed to UP Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel Root mount waiting for: CAM Feb 18 15:42:16 kernel mountroot: waiting for device /dev/diskid/DISK-D4EC8498s2a... Feb 18 15:42:16 kernel random: unblocking device. Feb 18 15:42:16 kernel lo0: link state changed to UP Feb 18 15:42:16 check_reload_status 362 Linkup starting $e6000sw0port1 Feb 18 15:42:16 kernel e6000sw0port1: link state changed to DOWN Feb 18 15:42:16 check_reload_status 362 Linkup starting $e6000sw0port2 Feb 18 15:42:16 kernel e6000sw0port2: link state changed to DOWN Feb 18 15:42:16 check_reload_status 362 Linkup starting $e6000sw0port3 Feb 18 15:42:16 kernel e6000sw0port3: link state changed to DOWN Feb 18 15:42:16 check_reload_status 362 Linkup starting $e6000sw0port4 Feb 18 15:42:16 kernel e6000sw0port4: link state changed to DOWN Feb 18 15:42:16 kernel vlan0: changing name to 'mvneta1.100' Feb 18 15:42:16 kernel vlan1: changing name to 'mvneta1.10' Feb 18 15:42:16 check_reload_status 362 Linkup starting mvneta2 Feb 18 15:42:16 kernel vlan2: changing name to 'mvneta1.20' Feb 18 15:42:16 kernel mvneta2: link state changed to UP Feb 18 15:42:17 sshd 22090 Server listening on :: port 22. Feb 18 15:42:17 sshd 22090 Server listening on 0.0.0.0 port 22. Feb 18 15:42:17 check_reload_status 362 rc.newwanip starting mvneta2 Feb 18 15:42:17 php 366 rc.bootup: calling interface_dhcpv6_configure. Feb 18 15:42:17 php 366 rc.bootup: Accept router advertisements on interface mvneta2 Feb 18 15:42:17 php 366 rc.bootup: Starting rtsold process Feb 18 15:42:18 php-fpm 348 /rc.newwanip: rc.newwanip: Info: starting on mvneta2. Feb 18 15:42:18 php-fpm 348 /rc.newwanip: rc.newwanip: on (IP address: X.X.X.X) (interface: WAN[wan]) (real interface: mvneta2). Feb 18 15:42:18 php-fpm 348 /rc.newwanip: Accept router advertisements on interface mvneta2 Feb 18 15:42:18 php-fpm 348 /rc.newwanip: Starting rtsold process Feb 18 15:42:19 check_reload_status 362 Linkup starting $e6000sw0port2 Feb 18 15:42:19 kernel e6000sw0port2: link state changed to UP Feb 18 15:42:20 kernel done. Feb 18 15:42:20 check_reload_status 362 Linkup starting $e6000sw0port1 Feb 18 15:42:20 kernel e6000sw0port1: link state changed to UP Feb 18 15:42:20 kernel e6000sw0port3: link state changed to UP Feb 18 15:42:20 kernel e6000sw0port4: link state changed to UP Feb 18 15:42:20 check_reload_status 362 Linkup starting $e6000sw0port3 Feb 18 15:42:20 check_reload_status 362 Linkup starting $e6000sw0port4 Feb 18 15:42:20 php-fpm 348 /rc.newwanip: The command '/usr/sbin/rtsold -1 -p /var/run/rtsold_mvneta2.pid -M /var/etc/rtsold_mvneta2_script.sh -O /var/etc/rtsold_mvneta2_script.sh mvneta2' returned exit code '1', the output was 'rtsold: failed to open pidfile: File exists' Feb 18 15:42:21 check_reload_status 362 rc.newwanip starting mvneta2 Feb 18 15:42:21 php 366 rc.bootup: calling interface_dhcpv6_configure. Feb 18 15:42:21 php 366 rc.bootup: Accept router advertisements on interface mvneta2 Feb 18 15:42:21 php 366 rc.bootup: Killing running rtsold process Feb 18 15:42:22 php-fpm 349 /rc.newwanip: rc.newwanip: Info: starting on mvneta2. Feb 18 15:42:22 php-fpm 349 /rc.newwanip: rc.newwanip: on (IP address: X.X.X.X) (interface: WAN[wan]) (real interface: mvneta2). Feb 18 15:42:22 php-fpm 349 /rc.newwanip: Accept router advertisements on interface mvneta2 Feb 18 15:42:22 php-fpm 349 /rc.newwanip: Starting rtsold process Feb 18 15:42:23 php 366 rc.bootup: Starting rtsold process Feb 18 15:42:25 php 366 rc.bootup: The command '/usr/sbin/rtsold -1 -p /var/run/rtsold_mvneta2.pid -M /var/etc/rtsold_mvneta2_script.sh -O /var/etc/rtsold_mvneta2_script.sh mvneta2' returned exit code '1', the output was 'rtsold: failed to open pidfile: File exists' Feb 18 15:42:25 php 366 rc.bootup: Resyncing OpenVPN instances. Feb 18 15:42:25 kernel pflog0: promiscuous mode enabled Feb 18 15:42:25 rtsold 41791 Received RA specifying route for interface wan(mvneta2) Feb 18 15:42:25 rtsold 42392 Starting dhcp6 client for interface wan(mvneta2) Feb 18 15:42:27 php-fpm 348 /rc.newwanipv6: rc.newwanipv6: Info: starting on mvneta2. Feb 18 15:42:27 php-fpm 348 /rc.newwanipv6: rc.newwanipv6: on (IP address: X.X.X.X.X.X.X) (interface: wan) (real interface: mvneta2). Feb 18 15:42:28 php-fpm 348 /rc.newwanipv6: Gateway, none 'available' for inet, use the first one configured. 'WAN_DHCP' Feb 18 15:42:28 php-fpm 348 /rc.newwanipv6: Default gateway setting Interface WAN_DHCP Gateway as default. Feb 18 15:42:28 php-fpm 348 /rc.newwanipv6: Gateway, none 'available' for inet6, use the first one configured. 'WAN_DHCP6' Feb 18 15:42:39 kernel pid 366 (php-cgi), jid 0, uid 0: exited on signal 11 (core dumped) Feb 18 15:42:39 php-fpm 349 /rc.start_packages: Restarting/Starting all packages. Feb 18 15:42:39 php-fpm 349 /rc.start_packages: Starting service nut Feb 18 15:42:39 upsmon 64296 Startup successful Feb 18 15:42:40 blazer_usb 65265 Startup successful Feb 18 15:42:40 upsd 65608 listening on 192.168.255.249 port 3493 Feb 18 15:42:40 upsd 65608 listening on ::1 port 3493 Feb 18 15:42:40 upsd 65608 listening on 127.0.0.1 port 3493 Feb 18 15:42:40 upsd 65608 Connected to UPS [ups]: blazer_usb-ups Feb 18 15:42:40 upsd 65816 Startup successful Feb 18 15:42:42 upsmon 66974 Startup successful Feb 18 15:42:43 lighttpd_pfb 74974 [pfBlockerNG] DNSBL Webserver started Feb 18 15:42:44 upsd 81219 listening on 192.168.255.249 port 3493 Feb 18 15:42:44 upsd 81219 listening on ::1 port 3493 Feb 18 15:42:44 upsd 81219 listening on 127.0.0.1 port 3493 Feb 18 15:42:44 upsd 81219 Can't connect to UPS [ups] (blazer_usb-ups): Connection refused Feb 18 15:42:44 upsd 81333 Startup successful Feb 18 15:42:44 php-fpm 349 [pfBlockerNG] Starting firewall filter daemon Feb 18 15:42:44 php 79331 [pfBlockerNG] DNSBL parser daemon started Feb 18 15:42:44 root 89009 Bootup complete Feb 18 15:42:45 lighttpd_pfb 90034 [pfBlockerNG] DNSBL Webserver started Feb 18 15:42:45 php 88877 [pfBlockerNG] filterlog daemon started Feb 18 15:42:45 php 88309 [pfBlockerNG] filterlog daemon started Feb 18 15:42:46 php 91697 [pfBlockerNG] DNSBL parser daemon started Feb 18 15:42:46 upsd 81333 User local-monitor@::1 logged into UPS [ups] Feb 18 15:42:46 upsmon 67756 Poll UPS [ups] failed - Driver not connected Feb 18 15:42:46 upsmon 67756 Communications with UPS ups lost Feb 18 15:42:46 login 98062 login on ttyu0 as root Feb 18 15:42:48 upsd 81333 User monuser@192.168.255.252 logged into UPS [ups] Feb 18 15:42:48 blazer_usb 13450 Startup successful Feb 18 15:42:50 upsd 81333 Connected to UPS [ups]: blazer_usb-ups Feb 18 15:42:51 upsmon 67756 Communications with UPS ups established Feb 18 15:43:44 upsd 81333 User monuser2@192.168.255.251 logged into UPS [ups] Feb 18 15:46:10 login 29288 login on ttyu0 as root Feb 18 15:46:21 php 35698 rc.restart_webgui: Creating rrd update script Feb 18 15:46:33 php-fpm 348 /index.php: Successful login for user 'admin' from: 192.168.255.250 (Local Database Fallback) Feb 18 15:46:39 check_reload_status 362 Syncing firewall Feb 18 15:46:41 check_reload_status 362 Syncing firewall Feb 18 15:46:41 check_reload_status 362 Syncing firewall Feb 18 15:46:42 check_reload_status 362 Reloading filter Feb 18 15:46:42 php-fpm 3213 [pfBlockerNG] Stopping firewall filter daemon Feb 18 15:46:42 check_reload_status 362 Syncing firewall Feb 18 15:46:42 check_reload_status 362 Syncing firewall Feb 18 15:46:44 upsmon 67756 Poll UPS [ups] failed - Write error: Permission denied Feb 18 15:46:44 upsmon 67756 Communications with UPS ups lost Feb 18 15:46:49 upsd 81333 User local-monitor@::1 logged into UPS [ups] Feb 18 15:46:49 upsmon 67756 Communications with UPS ups established Feb 18 15:46:52 php 64330 rc.initial.reboot: Stopping all packages. Feb 18 15:46:52 upsmon 67756 Signal 15: exiting Feb 18 15:46:52 upsd 81333 User local-monitor@::1 logged out from UPS [ups] Feb 18 15:46:52 upsd 81333 mainloop: Interrupted system call Feb 18 15:46:52 upsd 81333 Signal 15: exiting Feb 18 15:46:52 blazer_usb 13450 Signal 15: exiting Feb 18 15:46:55 reboot 73891 rebooted by root Feb 18 15:46:55 syslogd exiting on signal 15 Feb 18 15:47:48 syslogd kernel boot file is /boot/kernel/kernel Feb 18 15:47:48 kernel ---<<BOOT>>--- Feb 18 15:47:48 kernel Copyright (c) 1992-2020 The FreeBSD Project. Feb 18 15:47:48 kernel Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 Feb 18 15:47:48 kernel The Regents of the University of California. All rights reserved. Feb 18 15:47:48 kernel FreeBSD is a registered trademark of The FreeBSD Foundation. Feb 18 15:47:48 kernel FreeBSD 12.2-STABLE 38a4c12973d(plus-devel-12) pfSense-SG-3100 arm -
@mcury Thank you! Was the last reboot you initiated after it had froze up?
-
Understood. Tough to find a phantom bug! Some of the reports above say that there wasn't any output when it locked up. What is a signal 11 and what creates it? Is the core dump from a signal 11 of any use? (I have no idea how to retrieve it, but I thought I'd ask.)
-
@kphillips Yes, this is the first reboot after installing pfblockerng-devel.
Installed the program, ran the wizard, and reboot, and the problem happens.
To fix, got into the console, pressed 11 to restart the GUI, connected to it and disabled pfblockerng.
Then reboot and it's all fine. -
@mcury OK thank you. So to confirm, the webConfigurator is inaccessible and you cannot pass traffic at all when this happens? What if you ping by IP address rather than by hostname from a device attached to the LAN? If you ping 8.8.8.8, for example, does it succeed but DNS queries fail? Since pfBlockerNG ties into unbound (DNS Resolver) I'm wondering if its crashing the DNS Resolver causing your issue.
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.