21.02-RELEASE IPsec Mobile DNS Issues

[NogBadTheBad]

@jimp said in 21.02-RELEASE IPsec Mobile DNS Issues:

diff --git a/src/etc/inc/ipsec.inc b/src/etc/inc/ipsec.inc

Would that be via the patch manager or vi ?

[jimp]

However you want to make the change. Since it's just removing a couple lines, it doesn't need any special technique. Apply the patch or edit the file (vi, Diag > Edit File, scp copy, whatever)

[NogBadTheBad]

@jimp There are now entries in the mobile pool but lookups don't work after editing /etc/inc/ipsec.inc/

I've restarted the IPSec service and added another server entry.

mobile-pool {
dns = 172.16.0.1,172.16.1.1
# Search domain and default domain
28674 = "xxxxxxxxxx.net"
28675 = "xxxxxxxxxx.net"
}

[jimp]

After applying that change, make sure to stop and then start (not restart) the IPsec daemon to be certain it's loading it fresh/properly.

Also for good measure, from a shell prompt, run swanctl --load-all --file /var/etc/ipsec/swanctl.conf --debug 1 and make sure it's not generating any errors when loading that

[NogBadTheBad]

@jimp said in 21.02-RELEASE IPsec Mobile DNS Issues:

swanctl --load-all --file /var/etc/ipsec/swanctl.conf --debug 1

No luck after a stop & start.

# swanctl --load-all --file /var/etc/ipsec/swanctl.conf --debug 1 
loaded certificate from '/var/etc/ipsec/x509/cert-1.crt'
loaded certificate from '/var/etc/ipsec/x509ca/37e450ce.0'
loaded RSA key from '/var/etc/ipsec/private/cert-1.key'
no authorities found, 0 unloaded
no pools found, 0 unloaded
loaded connection 'bypass'
loaded connection 'con-mobile'
successfully loaded 2 connections, 0 unloaded

[jimp]

OK, so it's not loading it still. Makes sense as it may not have any other part of the configuration referencing it. I don't have any setups like this handy to poke at further, so I opened https://redmine.pfsense.org/issues/11447 to track it further for now.

[NogBadTheBad]

@jimp Ta Jim, if you need anymore info feel free to ask.

[NogBadTheBad]

I've found a work around.

# swanctl --load-all --file /var/etc/ipsec/swanctl.conf --debug 1
loaded certificate from '/var/etc/ipsec/x509/cert-1.crt'
loaded certificate from '/var/etc/ipsec/x509ca/37e450ce.0'
loaded RSA key from '/var/etc/ipsec/private/cert-1.key'
no authorities found, 0 unloaded
loaded pool 'mobile-pool-v4'
successfully loaded 1 pools, 0 unloaded
loaded connection 'bypass'
loaded connection 'con-mobile'
successfully loaded 2 connections, 0 unloaded
#

[jimp]

Do your clients still get their addresses from RADIUS?

[NogBadTheBad]

@jimp yes they do :)

[jimp]

OK, that should be good then. If a client doesn't have an address defined in RADIUS it will pull from that pool.

I know we added support to let both work at once in 2.5/21.02 but it hasn't seen a lot of real-world testing so far.

I'll try to find some time to setup a test rig for that here and see if I can come up with a way to allow the client settings to be defined without specifying the pool addresses.

[costasga]

Hi @jimp ! I am having the same problem after upgrading to 2.5. I used the workaround in this post, and mobile pools are loaded but still DNS servers are not pushed to Windows 10 client. It was all working great before the upgrade. Any clues on what to try out next?

[viktor_g]

@costasga try to apply Patch ID c03a2049b11304f592d0de78aa4bfb568e9a13ae
see https://docs.netgate.com/pfsense/en/latest/development/system-patches.html

[costasga]

@viktor_g Thanks for the super fast response. Unfortunately no improvement, DNS servers still not pushed. If uncheck the "Provide a virtual IP address to clients" like the above workaround, the mobile pool is not loaded despite the patch.