Update to 2.5.0 broke DHCP relay

thesurf · Feb 19, 2021, 8:49 PM

@jimp
Hi forgot. All Interface are intel x520 nic. So Interfaces will be ix0 and ix1 on each firewall. On top that is the vlan so ix0.8 and so on. NO Bridge.

johnsdixon · Feb 20, 2021, 5:58 PM

Also occurring on VMware ESXi 6.7 hosted environment with VMXNET3 cards. Single DHCP server target, with relays from six different networks (some VLAN, some 'direct' connect). Appears that all do not pass the DHCP packets to the server (none received in the external server logs), but packets are seen by packet capture on the interfaces concerned on pfSense.
Happy to build a test 2.5.0 environment to provide further info and logs if necessary.

viktor_g · Feb 21, 2021, 5:25 PM

@johnsdixon said in Update to 2.5.0 broke DHCP relay:

Happy to build a test 2.5.0 environment to provide further info and logs if necessary.

very good, we need to know:

DHCP Relay configuration (screenshot or <dhcrelay> part from your config.xml);
Routing table (netstat -rn output);
Interfaces IP addresses (ifconfig output);

thesurf · Feb 22, 2021, 10:46 AM

@viktor_g said in Update to 2.5.0 broke DHCP relay:

@johnsdixon said in Update to 2.5.0 broke DHCP relay:

Happy to build a test 2.5.0 environment to provide further info and logs if necessary.

very good, we need to know:

DHCP Relay configuration (screenshot or <dhcrelay> part from your config.xml);

Routing table (netstat -rn output);

Interfaces IP addresses (ifconfig output);

Hi, network plan I have already posted abouve.

Here are the requeired data:

[2.5.0-RELEASE][root@fwint3.XXXXXXXX.local]/conf: netstat -rn
Routing tables

Internet:
Destination        Gateway            Flags     Netif Expire
default            10.10.65.3         UGS    lagg0.65
10.10.55.0/28      link#19            U      lagg0.11
10.10.55.2         link#19            UHS         lo0
10.10.56.0/30      link#8             U          bge1
10.10.56.1         link#8             UHS         lo0
10.10.64.0/28      link#18            U      lagg0.64
10.10.64.4         link#18            UHS         lo0
10.10.64.6         link#18            UHS         lo0
10.10.65.0/28      link#17            U      lagg0.65
10.10.65.4         link#17            UHS         lo0
10.10.65.6         link#17            UHS         lo0
127.0.0.1          link#10            UH          lo0
192.168.8.0/24     link#14            U       lagg0.8
192.168.8.252      link#14            UHS         lo0
192.168.8.254      link#14            UHS         lo0
192.168.11.0/24    link#19            U      lagg0.11
192.168.11.252     link#19            UHS         lo0
192.168.11.254     link#19            UHS         lo0
192.168.24.0/24    link#15            U      lagg0.24
192.168.24.252     link#15            UHS         lo0
192.168.24.254     link#15            UHS         lo0
192.168.71.0/24    link#20            U      lagg0.71
192.168.71.252     link#20            UHS         lo0
192.168.71.254     link#20            UHS         lo0
192.168.109.0/24   link#16            U      lagg0.10
192.168.109.252    link#16            UHS         lo0
192.168.109.254    link#16            UHS         lo0

Internet6:
Destination                       Gateway                       Flags     Netif Expire
::1                               link#10                       UH          lo0
fe80::%bge1/64                    link#8                        U          bge1
fe80::529a:4cff:fe94:ad73%bge1    link#8                        UHS         lo0
fe80::%lo0/64                     link#10                       U           lo0
fe80::1%lo0                       link#10                       UHS         lo0
fe80::%lagg0/64                   link#13                       U         lagg0
fe80::faf2:1eff:fe34:9540%lagg0   link#13                       UHS         lo0
fe80::%lagg0.8/64                 link#14                       U       lagg0.8
fe80::faf2:1eff:fe34:9540%lagg0.8 link#14                       UHS         lo0
fe80::%lagg0.24/64                link#15                       U      lagg0.24
fe80::faf2:1eff:fe34:9540%lagg0.24 link#15                      UHS         lo0
fe80::%lagg0.109/64               link#16                       U      lagg0.10
fe80::faf2:1eff:fe34:9540%lagg0.109 link#16                     UHS         lo0
fe80::%lagg0.65/64                link#17                       U      lagg0.65
fe80::faf2:1eff:fe34:9540%lagg0.65 link#17                      UHS         lo0
fe80::%lagg0.64/64                link#18                       U      lagg0.64
fe80::faf2:1eff:fe34:9540%lagg0.64 link#18                      UHS         lo0
fe80::%lagg0.11/64                link#19                       U      lagg0.11
fe80::faf2:1eff:fe34:9540%lagg0.11 link#19                      UHS         lo0
fe80::%lagg0.71/64                link#20                       U      lagg0.71
fe80::faf2:1eff:fe34:9540%lagg0.71 link#20                      UHS         lo0

[2.5.0-RELEASE][root@fwint3.XXXXXXXXXXX.local]/conf: ifconfig
igb0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether b4:96:91:33:de:40
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether b4:96:91:33:de:41
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether b4:96:91:33:de:42
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
igb3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether b4:96:91:33:de:43
        media: Ethernet autoselect
        status: no carrier
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ixl0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        media: Ethernet autoselect (10Gbase-SR <full-duplex>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
ixl1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        hwaddr f8:f2:1e:34:95:41
        media: Ethernet autoselect (10Gbase-SR <full-duplex>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bge0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 50:9a:4c:94:ad:72
        media: Ethernet autoselect
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: sync
        options=c019b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,VLAN_HWTSO,LINKSTATE>
        ether 50:9a:4c:94:ad:73
        inet6 fe80::529a:4cff:fe94:ad73%bge1 prefixlen 64 scopeid 0x8
        inet 10.10.56.1 netmask 0xfffffffc broadcast 10.10.56.3
        media: Ethernet autoselect (1000baseT <full-duplex,master>)
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=41<UP,RUNNING> metric 0 mtu 1536
        groups: enc
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0xa
        inet 127.0.0.1 netmask 0xff000000
        groups: lo
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33160
        groups: pflog
pfsync0: flags=41<UP,RUNNING> metric 0 mtu 1500
        pfsync: syncdev: bge1 syncpeer: 10.10.56.2 maxupd: 128 defer: off
        syncok: 1
        groups: pfsync
lagg0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=e507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0 prefixlen 64 scopeid 0xd
        laggproto failover lagghash l2,l3,l4
        laggport: ixl0 flags=5<MASTER,ACTIVE>
        laggport: ixl1 flags=0<>
        groups: lagg
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.8: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: LANMaMue
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.8 prefixlen 64 scopeid 0xe
        inet 192.168.8.252 netmask 0xffffff00 broadcast 192.168.8.255
        inet 192.168.8.254 netmask 0xffffff00 broadcast 192.168.8.255 vhid 8
        groups: vlan
        carp: MASTER vhid 8 advbase 5 advskew 1
        vlan: 8 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.24: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: PrintMaMue
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.24 prefixlen 64 scopeid 0xf
        inet 192.168.24.252 netmask 0xffffff00 broadcast 192.168.24.255
        inet 192.168.24.254 netmask 0xffffff00 broadcast 192.168.24.255 vhid 24
        groups: vlan
        carp: MASTER vhid 24 advbase 5 advskew 1
        vlan: 24 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.109: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: VoiceMaMue
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.109 prefixlen 64 scopeid 0x10
        inet 192.168.109.252 netmask 0xffffff00 broadcast 192.168.109.255
        inet 192.168.109.254 netmask 0xffffff00 broadcast 192.168.109.255 vhid 109
        groups: vlan
        carp: MASTER vhid 109 advbase 5 advskew 1
        vlan: 109 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.65: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: CarrierVlanLWL
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.65 prefixlen 64 scopeid 0x11
        inet 10.10.65.4 netmask 0xfffffff0 broadcast 10.10.65.15
        inet 10.10.65.6 netmask 0xfffffff0 broadcast 10.10.65.15 vhid 65
        groups: vlan
        carp: MASTER vhid 65 advbase 5 advskew 1
        vlan: 65 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.64: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: CarrierVLanWlan
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.64 prefixlen 64 scopeid 0x12
        inet 10.10.64.4 netmask 0xfffffff0 broadcast 10.10.64.15
        inet 10.10.64.6 netmask 0xfffffff0 broadcast 10.10.64.15 vhid 64
        groups: vlan
        carp: MASTER vhid 64 advbase 5 advskew 1
        vlan: 64 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.11: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: MgmtMaMue
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.11 prefixlen 64 scopeid 0x13
        inet 192.168.11.252 netmask 0xffffff00 broadcast 192.168.11.255
        inet 192.168.11.254 netmask 0xffffff00 broadcast 192.168.11.255 vhid 11
        inet 10.10.55.2 netmask 0xfffffff0 broadcast 10.10.55.15
        groups: vlan
        carp: MASTER vhid 11 advbase 1 advskew 0
        vlan: 11 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lagg0.71: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        description: ErfasserLAN
        options=600703<RXCSUM,TXCSUM,TSO4,TSO6,LRO,RXCSUM_IPV6,TXCSUM_IPV6>
        ether f8:f2:1e:34:95:40
        inet6 fe80::faf2:1eff:fe34:9540%lagg0.71 prefixlen 64 scopeid 0x14
        inet 192.168.71.252 netmask 0xffffff00 broadcast 192.168.71.255
        inet 192.168.71.254 netmask 0xffffff00 broadcast 192.168.71.255 vhid 71
        groups: vlan
        carp: MASTER vhid 71 advbase 1 advskew 0
        vlan: 71 vlanpcp: 0 parent interface: lagg0
        media: Ethernet autoselect
        status: active
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>

I have deactivated dhcp server and enabled dhcp forwarding again with the values as there where and saved it:

but unter /conf/config.xml I cat NOT find anything about dhcp forwarding. Even the gui said it was saved. (Did I look on the wrong place?)

This is out of the 2.4.4p1 config

<dhcrelay>
	<enable></enable>
	<interface>opt1,opt3,opt7,opt8</interface>
	<agentoption></agentoption>
	<server>192.168.1.28,192.168.1.27</server>
</dhcrelay>

johnsdixon · Feb 22, 2021, 11:42 AM

@viktor_g
Also from my environment.. (first set under 2.4.5_1, second under 2.5.0).

<dhcrelay>
        <enable></enable>
        <interface>lan</interface>
        <agentoption></agentoption>
        <server>192.168.99.1</server>
</dhcrelay>

Routing tables

Internet:
Destination        Gateway            Flags     Netif Expire
default            100.64.44.1        UGS        vmx0
100.64.44.0/24     link#1             U          vmx0
100.64.44.3        link#1             UHS         lo0
127.0.0.1          link#3             UH          lo0
192.168.0.0/16     100.64.44.1        UGS        vmx0
192.168.192.0/24   link#2             U          vmx1
192.168.192.1      link#2             UHS         lo0

Internet6:
Destination                       Gateway                       Flags     Netif Expire
::1                               link#3                        UH          lo0
fe80::%vmx0/64                    link#1                        U          vmx0
fe80::20c:29ff:fe24:ebd7%vmx0     link#1                        UHS         lo0
fe80::%vmx1/64                    link#2                        U          vmx1
fe80::20c:29ff:fe24:ebe1%vmx1     link#2                        UHS         lo0
fe80::%lo0/64                     link#3                        U           lo0
fe80::1%lo0                       link#3                        UHS         lo0

vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=60009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 00:0c:29:24:eb:d7
	hwaddr 00:0c:29:24:eb:d7
	inet6 fe80::20c:29ff:fe24:ebd7%vmx0 prefixlen 64 scopeid 0x1
	inet 100.64.44.3 netmask 0xffffff00 broadcast 100.64.44.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect
	status: active
vmx1: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
	options=60009b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 00:0c:29:24:eb:e1
	hwaddr 00:0c:29:24:eb:e1
	inet6 fe80::20c:29ff:fe24:ebe1%vmx1 prefixlen 64 scopeid 0x2
	inet 192.168.192.1 netmask 0xffffff00 broadcast 192.168.192.255
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	media: Ethernet autoselect
	status: active
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
	inet 127.0.0.1 netmask 0xff000000
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: lo
enc0: flags=0<> metric 0 mtu 1536
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
	groups: enc
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog

And from 2.5.0, immediately after upgrading.

-<dhcrelay>
<enable/>
<interface>lan</interface>
<agentoption/>
<server>192.168.99.1</server>
</dhcrelay>

Routing tables

Internet:
Destination        Gateway            Flags     Netif Expire
default            100.64.44.1        UGS        vmx0
100.64.44.0/24     link#1             U          vmx0
100.64.44.3        link#1             UHS         lo0
127.0.0.1          link#4             UH          lo0
192.168.0.0/16     100.64.44.1        UGS        vmx0
192.168.192.0/24   link#2             U          vmx1
192.168.192.1      link#2             UHS         lo0

Internet6:
Destination                       Gateway                       Flags     Netif Expire
::1                               link#4                        UH          lo0
fe80::%vmx0/64                    link#1                        U          vmx0
fe80::20c:29ff:fe24:ebd7%vmx0     link#1                        UHS         lo0
fe80::%vmx1/64                    link#2                        U          vmx1
fe80::20c:29ff:fe24:ebe1%vmx1     link#2                        UHS         lo0
fe80::%lo0/64                     link#4                        U           lo0
fe80::1%lo0                       link#4                        UHS         lo0

vmx0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: WAN
	options=e000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 00:0c:29:24:eb:d7
	inet6 fe80::20c:29ff:fe24:ebd7%vmx0 prefixlen 64 scopeid 0x1
	inet 100.64.44.3 netmask 0xffffff00 broadcast 100.64.44.255
	media: Ethernet autoselect
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
vmx1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
	description: LAN
	options=e000bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
	ether 00:0c:29:24:eb:e1
	inet6 fe80::20c:29ff:fe24:ebe1%vmx1 prefixlen 64 scopeid 0x2
	inet 192.168.192.1 netmask 0xffffff00 broadcast 192.168.192.255
	media: Ethernet autoselect
	status: active
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
enc0: flags=0<> metric 0 mtu 1536
	groups: enc
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
	options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6>
	inet6 ::1 prefixlen 128
	inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4
	inet 127.0.0.1 netmask 0xff000000
	groups: lo
	nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
pflog0: flags=100<PROMISC> metric 0 mtu 33160
	groups: pflog
pfsync0: flags=0<> metric 0 mtu 1500
	groups: pfsync

johnsdixon · Feb 22, 2021, 3:51 PM

@victor_g
Correction: Having moved the backup file from 2.4.5 across the divide, it is as below..
Errors introduced by rekeying and not reading what's on the screen.

-<dhcrelay>
    <enable/>
    <interface>lan</interface>
    <agentoption/>
    <server>192.168.123.1</server>
</dhcrelay>

k60010 · Feb 22, 2021, 1:21 PM

Our dhcp relay service failure on 2.5.0 update seems to be hardware specific.

Netgate XG-1537 = success 2 out 2 (version 21.02)
VMware 6.5 = success 4 out of 4
Supermicro 1U server (not sure of flavor, rear facing ports) 1 out of 1
Supermicro CSE-505-203B = fail 2 out of 2
Supermicro SYS-5018D-FN8T = fail 4 out of 4

Have not tried bare metal reload on failures yet.

fwcheck · Feb 22, 2021, 3:33 PM

I think i found the root cause.

DHCP-Server is Upstream (behind) WAN.
DHCP-Relay for example only on LAN.

At least i found a hint in Syslog:

Feb 22 16:01:17 check_reload_status 363 Syncing firewall
Feb 22 16:01:18 php-fpm 326 /services_dhcp_relay.php: No suitable upstream interfaces found for running dhcrelay!

I guess i know where the problem resides.

Our default configuration sets the dhcp-relay only for the interfaces, not for wan. Our DHCP-Servers resides are mostly upstream on the WAN side. We have some firewalls where that is different.

/etc/inc/services.inc

    $srvifaces = array();
    foreach ($srvips as $srcidx => $srvip) {
            $destif = guess_interface_from_ip($srvip);
            if (!empty($destif) && !is_pseudo_interface($destif)) {
                    $srvifaces[] = $destif;
            }
    }

    /* Check for relays in the same subnet as clients so they can bind for
     * either direction (up or down) */
    $srvrelayifs = array_intersect($dhcrelayifs, $srvifaces);

    /* The server interface(s) should not be in this list */
    $dhcrelayifs = array_diff($dhcrelayifs, $srvifaces);

    /* Remove the dual-role interfaces from up and down lists */
    $srvifaces = array_diff($srvifaces, $srvrelayifs);
    $dhcrelayifs = array_diff($dhcrelayifs, $srvrelayifs);

    /* fire up dhcrelay */
    if (empty($dhcrelayifs) && empty($srvrelayifs)) {
            log_error(gettext("No suitable downstream interfaces found for running dhcrelay!"));
            return; /* XXX */
    }
    if (empty($srvifaces) && empty($srvrelayifs)) {
    # Error is here 
            log_error(gettext("No suitable upstream interfaces found for running dhcrelay!"));
            return; /* XXX */
    }

My dhcp-Server resides outside of any net within the firewall, therefore $servifaces
is empty, resulting in the error in syslog.

My fix is to explicit add the upstream if there is none. I am not quite sure if this is the best variant. I would think that fixing guess_interface_from_ip() might be a better way.

    if (empty($srvifaces)){
            $srvifaces[] = "vmx0";
    }
    if (empty($srvifaces) && empty($srvrelayifs)) {
            log_error(gettext("No suitable upstream interfaces found for running dhcrelay!"));
            return; /* XXX */
    }

If there is anything else you need to know please let me know.

johnsdixon · Feb 22, 2021, 3:51 PM

@victor_g
Further investigation on the upgraded 2.5.0 production environment shows (in /var/log/dhcpd.log)

Feb 22 15:41:48 wight dhcrelay[82265]: Internet Systems Consortium DHCP Relay Agent 4.4.2
Feb 22 15:41:48 wight dhcrelay[82265]: Copyright 2004-2020 Internet Systems Consortium.
Feb 22 15:41:48 wight dhcrelay[82265]: All rights reserved.
Feb 22 15:41:48 wight dhcrelay[82265]: For info, please visit https://www.isc.org/software/dhcp/
**Feb 22 15:41:48 wight dhcrelay[82265]: Unsupported device type 24 for "lo0"**
Feb 22 15:41:48 wight dhcrelay[82265]:
Feb 22 15:41:48 wight dhcrelay[82265]: If you think you have received this message due to a bug rather
Feb 22 15:41:48 wight dhcrelay[82265]: than a configuration issue please read the section on submitting
Feb 22 15:41:48 wight dhcrelay[82265]: bugs on either our web page at www.isc.org or in the README file
Feb 22 15:41:48 wight dhcrelay[82265]: before submitting a bug.  These pages explain the proper
Feb 22 15:41:48 wight dhcrelay[82265]: process and the information we find helpful for debugging.
Feb 22 15:41:48 wight dhcrelay[82265]:
Feb 22 15:41:48 wight dhcrelay[82265]: exiting.

So perhaps the default upgrade is adding lo0 to the dhcrelay startup process?

The equivalent from the 2.4.5_1 environment is as follows:

Feb 22 15:47:00 wight dhcrelay: Internet Systems Consortium DHCP Relay Agent 4.4.1
Feb 22 15:47:00 wight dhcrelay: Copyright 2004-2018 Internet Systems Consortium.
Feb 22 15:47:00 wight dhcrelay: All rights reserved.
Feb 22 15:47:00 wight dhcrelay: For info, please visit https://www.isc.org/software/dhcp/
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx4/00:0c:29:10:bf:e3
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx4/00:0c:29:10:bf:e3
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx7.888/00:0c:29:10:bf:15
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx7.888/00:0c:29:10:bf:15
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx6/00:0c:29:10:bf:ed
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx6/00:0c:29:10:bf:ed
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx5/00:0c:29:10:bf:0b
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx5/00:0c:29:10:bf:0b
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx3/00:0c:29:10:bf:01
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx3/00:0c:29:10:bf:01
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx2/00:0c:29:10:bf:d9
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx2/00:0c:29:10:bf:d9
Feb 22 15:47:00 wight dhcrelay: Listening on BPF/vmx1/00:0c:29:10:bf:f7
Feb 22 15:47:00 wight dhcrelay: Sending on   BPF/vmx1/00:0c:29:10:bf:f7
Feb 22 15:47:00 wight dhcrelay: Sending on   Socket/fallback

fwcheck · Feb 22, 2021, 3:54 PM

Ok i have to add, that this is a solution (WAN is always vmx0) for my case. The physical interface of another system has sure another name,
<interfaces>
<wan>
<enable></enable>
<if>vmx0</if>
Therefore more general it is s.th. like
$config[interfaces][wan][if]
..

johnsdixon · Feb 22, 2021, 4:52 PM

@fwcheck There's definitely something odd going on.
In the test scenario, I have a similar environment, with DHCP server on the dirty (WAN) side, using vmx0. This seems to be working correctly, as I get vmx0 in the $srvifaces list.
But no lo0 in any list.

Now adding more elements to the test environment to find the thing that triggers lo0 to get added to the list.

Gertjan · Feb 23, 2021, 7:07 AM

@johnsdixon said in Update to 2.5.0 broke DHCP relay:

But no lo0 in any list.

Isn't that a good thing ?
lo0 is the local host or 127.0.0.1
dhcrelay can't operate on "lo0" :

@johnsdixon said in Update to 2.5.0 broke DHCP relay:

Feb 22 15:41:48 wight dhcrelay[82265]: Unsupported device type 24 for "lo0"

which is rather logic.

johnsdixon · Feb 23, 2021, 10:59 AM

@gertjan But my production environment generates a startup command for the DHCP relay with lo0 included.
This is not there in 2.4.5_1, but following an upgrade to 2.5.0 this appears, and there is no functioning DHCP relay process started by default in that situation. What I'm trying to do is work out what is triggering the inclusion of the lo0 within the startup process.
There is no lo0 anywhere in my config, nor has disabling services (eg. squid, OpenVPN) on the production configuration gained me working DHCP forwarding.

viktor_g · Feb 24, 2021, 2:09 PM

Redmine issue created:
https://redmine.pfsense.org/issues/11523

elfranko · Feb 28, 2021, 10:40 PM

I tried the beta of 2.5, and discovered the same thing.

I posted my 2.5 findings in here:
[https://forum.netgate.com/topic/157022/not-sure-if-it-is-a-bug-or-not-dhcprelay-in-2-5?_=1614502774329](link url)

Hope this helps.
I have upgraded to 2.5, and it seems to be working on my setup.

Cheers

Elfranko

Roland_V · Mar 1, 2021, 10:15 PM

@viktor_g
I can confirm, that this issue relates to routing as already mentioned on redmine, and it doesn't exist in earlier Versions of pfSense.

Having this configuration, where LAN is for Management only, and WAN is for Connection to Internet Router, DHCP-Server is on opt2, and Test-Computer trying to get IP via DHCP is on opt3:

<interfaces>
	<wan>
		<enable></enable>
		<if>hn2</if>
		<blockbogons></blockbogons>
		<descr><![CDATA[WAN]]></descr>
		<spoofmac></spoofmac>
		<ipaddr>172.30.0.99</ipaddr>
		<subnet>16</subnet>
		<gateway>WANGW</gateway>
	</wan>
	<lan>
		<enable></enable>
		<if>hn0</if>
		<ipaddr>10.100.0.99</ipaddr>
		<subnet>16</subnet>
		<gateway></gateway>
		<gatewayv6></gatewayv6>
		<descr><![CDATA[LAN]]></descr>
	</lan>
	<opt2>
		<descr><![CDATA[TestDC]]></descr>
		<if>hn3</if>
		<enable></enable>
		<spoofmac></spoofmac>
		<ipaddr>10.199.0.1</ipaddr>
		<subnet>24</subnet>
	</opt2>
	<opt3>
		<descr><![CDATA[Test1]]></descr>
		<if>hn1</if>
		<enable></enable>
		<spoofmac></spoofmac>
		<ipaddr>10.99.1.1</ipaddr>
		<subnet>24</subnet>
	</opt3>
</interfaces>
<staticroutes>
	<route>
		<network>10.0.0.0/8</network>
		<gateway>Null4</gateway>
		<descr><![CDATA[Default bei RFC 1918, Private Class A]]></descr>
	</route>
	<route>
		<network>172.16.0.0/12</network>
		<gateway>Null4</gateway>
		<descr><![CDATA[Default bei RFC 1918, Private Class B]]></descr>
	</route>
	<route>
		<network>192.168.0.0/16</network>
		<gateway>Null4</gateway>
		<descr><![CDATA[Default bei RFC 1918, Private Class C]]></descr>
	</route>
</staticroutes> 
<dhcrelay>
	<enable></enable>
	<interface>opt3</interface>
	<agentoption></agentoption>
	<server>10.199.0.11</server>
</dhcrelay>

The NULL-Routes are to avoid Packets with local Addresses going to Internet (implicit Routes of direct attached Subnets have higher Priority).

With this configuration you cannot start DHCP-Relay Service (dhcrelay).

If you modify the NULL-Route "10.0.0.0/8" to something where the Subnet to the DHCP-Server is not part of (in my configuration e.g. "10.0.0.0/9"), then everything works fine.

Remark: After modifying Routes you have to reboot pfSense, because already existing routes were not replaced, but the modified route is added (no automatic flush of routing cache).

viktor_g · Mar 2, 2021, 2:19 PM

Try to apply Patch ID 7990de53bfc8267d1dd96636a175929a35cbe664 to fix DHCP Relay issue

see https://redmine.pfsense.org/issues/11475

@roland_v said in Update to 2.5.0 broke DHCP relay:

Remark: After modifying Routes you have to reboot pfSense, because already existing routes were not replaced, but the modified route is added (no automatic flush of routing cache).

Could you create a new redmine issue for this?

Roland_V · Mar 2, 2021, 2:19 PM

@viktor_g
Because I'm not able to build pfSense from source, I tried last development snapshot built on Tue Mar 02 01:18:30 EST 2021.

With this version the DHCP-Relay works as expected.

For "Error on updating routing table after modifying static routes" I will open a new redmin issue as requested.

chrullrich · Mar 14, 2021, 4:04 PM

@viktor_g said in Update to 2.5.0 broke DHCP relay:

Try to apply Patch ID 7990de53bfc8267d1dd96636a175929a35cbe664 to fix DHCP Relay issue

Thanks, this patch fixed my identical problem.

For future reference, because some people might not know about it: See https://docs.netgate.com/pfsense/en/latest/development/system-patches.html for how to apply such patches to an existing installation.

--
Christian

wurst · Mar 28, 2022, 4:20 PM

Hi,
just stepped on the same issue with PfSense 2.6.0
The Patch didnt pass the check, so i can´t apply it.

My setup contains several LAN adapters leading to several (/24) Subnets.
The DHCP server is reachable on a remote system via Open VPN.

Can You help me out?

/usr/bin/patch --directory='/' -t  --strip '2' -i '/var/patches/6241d97843a1b.patch' --check --forward --ignore-whitespace

Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 7990de53bfc8267d1dd96636a175929a35cbe664 Mon Sep 17 00:00:00 2001
|From: Viktor G <viktor@netgate.com>
|Date: Thu, 25 Feb 2021 16:42:35 +0300
|Subject: [PATCH] route_get() optimization. Fixes #11475
|
|---
| src/etc/inc/interfaces.inc |  2 +-
| src/etc/inc/util.inc       | 50 +++++++++++++++++++++++++++++---------
| 2 files changed, 39 insertions(+), 13 deletions(-)
|
|diff --git a/src/etc/inc/interfaces.inc b/src/etc/inc/interfaces.inc
|index 35206915d92..307e76edcef 100644
|--- a/src/etc/inc/interfaces.inc
|+++ b/src/etc/inc/interfaces.inc
--------------------------
Patching file etc/inc/interfaces.inc using Plan A...
Ignoring previously applied (or reversed) patch.
Hunk #1 ignored at 6041.
1 out of 1 hunks ignored while patching etc/inc/interfaces.inc
Hmm...  The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff --git a/src/etc/inc/util.inc b/src/etc/inc/util.inc
|index 6f94b0da41e..bc5178dee61 100644
|--- a/src/etc/inc/util.inc
|+++ b/src/etc/inc/util.inc
--------------------------
Patching file etc/inc/util.inc using Plan A...
Ignoring previously applied (or reversed) patch.
Hunk #1 ignored at 2692.
Hunk #2 ignored at 2707.
Hunk #3 ignored at 2755.
3 out of 3 hunks ignored while patching etc/inc/util.inc
done


/usr/bin/patch --directory='/' -f  --strip '2' -i '/var/patches/6241d97843a1b.patch' --check --reverse --ignore-whitespace

Hmm...  Looks like a unified diff to me...
The text leading up to this was:
--------------------------
|From 7990de53bfc8267d1dd96636a175929a35cbe664 Mon Sep 17 00:00:00 2001
|From: Viktor G <viktor@netgate.com>
|Date: Thu, 25 Feb 2021 16:42:35 +0300
|Subject: [PATCH] route_get() optimization. Fixes #11475
|
|---
| src/etc/inc/interfaces.inc |  2 +-
| src/etc/inc/util.inc       | 50 +++++++++++++++++++++++++++++---------
| 2 files changed, 39 insertions(+), 13 deletions(-)
|
|diff --git a/src/etc/inc/interfaces.inc b/src/etc/inc/interfaces.inc
|index 35206915d92..307e76edcef 100644
|--- a/src/etc/inc/interfaces.inc
|+++ b/src/etc/inc/interfaces.inc
--------------------------
Patching file etc/inc/interfaces.inc using Plan A...
Hunk #1 succeeded at 6041 (offset -118 lines).
Hmm...  The next patch looks like a unified diff to me...
The text leading up to this was:
--------------------------
|diff --git a/src/etc/inc/util.inc b/src/etc/inc/util.inc
|index 6f94b0da41e..bc5178dee61 100644
|--- a/src/etc/inc/util.inc
|+++ b/src/etc/inc/util.inc
--------------------------
Patching file etc/inc/util.inc using Plan A...
Hunk #1 succeeded at 2692 (offset 43 lines).
Hunk #2 failed at 2705.
Hunk #3 succeeded at 2690 (offset 4 lines).
1 out of 3 hunks failed while patching etc/inc/util.inc
done