Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    site to site vpn configuration between pfsense and cisco asa 5505

    Scheduled Pinned Locked Moved General pfSense Questions
    29 Posts 3 Posters 2.9k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • F
      franco22 @stephenw10
      last edited by

      @stephenw10 daadc513-eb62-4a2e-b7c8-9f9dd9669c79-image.png .

      Below I have mentioned the cli of asa

      ASA Version 8.4(2)
      !
      hostname ciscoasa
      enable password 8Ry2YjIyt7RRXU24 encrypted
      passwd 2KFQnbNIdI.2KYOU encrypted
      names
      !
      interface Ethernet0/0
      switchport access VLAN 2
      !
      interface Ethernet0/1
      !
      interface Ethernet0/2
      !
      interface Ethernet0/3
      !
      interface Ethernet0/4
      !
      interface Ethernet0/5
      !
      interface Ethernet0/6
      !
      interface Ethernet0/7
      !
      interface Vlan1
      nameif inside
      security-level 100
      ip address 192.168.30.150 255.255.255.0
      !
      interface Vlan2
      nameif outside
      security-level 0
      ip address 192.168.10.150 255.255.255.0
      !
      ftp mode passive
      clock timezone GMT 0
      object network NETWORK_OBJ_192.168.20.0_24
      subnet 192.168.20.0 255.255.255.0
      object network NETWORK_OBJ_192.168.30.0_24
      subnet 192.168.30.0 255.255.255.0
      object-group service DM_INLINE_SERVICE_1
      service-object ip
      service-object icmp
      service-object icmp echo
      service-object icmp echo-reply
      object-group service DM_INLINE_SERVICE_2
      service-object ip
      service-object icmp
      service-object icmp echo-reply
      access-list outside_cryptomap_10 remark ACL to encrypt traffic from ASA to pfSense
      access-list outside_cryptomap_10 extended permit ip 192.168.30.0 255.255.255.0 192.168.20.0 255.255.255.0
      access-list outside-in extended permit ip any any
      access-list outside_access_in remark icmp reply to vpn
      access-list outside_access_in extended permit object-group DM_INLINE_SERVICE_1 host 192.168.30.0 host 192.168.20.0
      access-list inside_access_in extended permit object-group DM_INLINE_SERVICE_2 192.168.30.0 255.255.255.0 192.168.20.0 255.255.255.0
      access-list inside_access_in extended permit ip host 192.168.20.175 host 192.168.30.0
      access-list global_access extended permit ip any any
      access-list OUTSIDE_IN extended permit icmp any any echo-reply
      pager lines 24
      logging enable
      logging asdm informational
      mtu inside 1500
      mtu outside 1500
      icmp unreachable rate-limit 1 burst-size 1
      asdm image disk0:/asdm-731.bin
      no asdm history enable
      arp timeout 14400
      nat (inside,outside) source static NETWORK_OBJ_192.168.30.0_24 NETWORK_OBJ_192.168.30.0_24 destination static NETWORK_OBJ_192.168.20.0_24 NETWORK_OBJ_192.168.20.0_24 no-proxy-arp route-lookup
      !
      nat (inside,outside) after-auto source dynamic NETWORK_OBJ_192.168.30.0_24 interface
      access-group inside_access_in in interface inside
      access-group OUTSIDE_IN in interface outside
      access-group global_access global
      route outside 0.0.0.0 0.0.0.0 192.168.10.1 1
      timeout xlate 3:00:00
      timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
      timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
      timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
      timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
      timeout tcp-proxy-reassembly 0:01:00
      timeout floating-conn 0:00:00
      dynamic-access-policy-record DfltAccessPolicy
      user-identity default-domain LOCAL
      http server enable
      http 192.168.30.0 255.255.255.0 inside
      no snmp-server location
      no snmp-server contact
      snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart
      crypto ipsec ikev1 transform-set pfSense esp-aes esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-128-SHA esp-aes esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-128-MD5 esp-aes esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-256-SHA esp-aes-256 esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS esp-aes esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-128-SHA-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS esp-aes esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-128-MD5-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS esp-aes-192 esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-192-SHA-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS esp-aes-192 esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-192-MD5-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS esp-aes-256 esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-AES-256-SHA-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS esp-aes-256 esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-AES-256-MD5-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS esp-3des esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-3DES-SHA-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS esp-3des esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-3DES-MD5-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-DES-MD5 esp-des esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS esp-des esp-sha-hmac
      crypto ipsec ikev1 transform-set ESP-DES-SHA-TRANS mode transport
      crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS esp-des esp-md5-hmac
      crypto ipsec ikev1 transform-set ESP-DES-MD5-TRANS mode transport
      crypto ipsec ikev2 ipsec-proposal DES
      protocol esp encryption des
      protocol esp integrity sha-1 md5
      crypto ipsec ikev2 ipsec-proposal 3DES
      protocol esp encryption 3des
      protocol esp integrity sha-1 md5
      crypto ipsec ikev2 ipsec-proposal AES
      protocol esp encryption aes
      protocol esp integrity sha-1 md5
      crypto ipsec ikev2 ipsec-proposal AES192
      protocol esp encryption aes-192
      protocol esp integrity sha-1 md5
      crypto ipsec ikev2 ipsec-proposal AES256
      protocol esp encryption aes-256
      protocol esp integrity sha-1 md5
      crypto map outside_map 10 match address outside_cryptomap_10
      crypto map outside_map 10 set peer 192.168.10.175
      crypto map outside_map 10 set ikev1 transform-set pfSense
      crypto map outside_map 10 set reverse-route
      crypto map outside_map interface outside
      crypto ikev1 enable outside
      crypto ikev1 policy 1
      authentication pre-share
      encryption aes
      hash sha
      group 2
      lifetime 86400
      telnet timeout 5
      ssh timeout 5
      console timeout 0

      threat-detection basic-threat
      threat-detection statistics port
      threat-detection statistics protocol
      threat-detection statistics access-list
      no threat-detection statistics tcp-intercept
      webvpn
      group-policy DfltGrpPolicy attributes
      vpn-tunnel-protocol ikev1 l2tp-ipsec ssl-clientless
      username franco password rkfkSGltksT7dMZG encrypted
      tunnel-group 192.168.10.175 type ipsec-l2l
      tunnel-group 192.168.10.175 ipsec-attributes
      ikev1 pre-shared-key *****
      !
      class-map inspection_default
      match default-inspection-traffic
      !
      !
      policy-map type inspect dns preset_dns_map
      parameters
      message-length maximum client auto
      message-length maximum 512
      policy-map global_policy
      class inspection_default
      inspect dns preset_dns_map
      inspect ftp
      inspect h323 h225
      inspect h323 ras
      inspect ip-options
      inspect netbios
      inspect rsh
      inspect rtsp
      inspect skinny
      inspect esmtp
      inspect sqlnet
      inspect sunrpc
      inspect tftp
      inspect sip
      inspect xdmcp
      inspect icmp
      !
      service-policy global_policy global
      prompt hostname context
      no call-home reporting anonymous
      call-home
      profile CiscoTAC-1
      no active
      destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
      destination address email callhome@cisco.com
      destination transport-method http
      subscribe-to-alert-group diagnostic
      subscribe-to-alert-group environment
      subscribe-to-alert-group inventory periodic monthly
      subscribe-to-alert-group configuration periodic monthly
      subscribe-to-alert-group telemetry periodic daily
      Cryptochecksum:ad5e08543ca85592802a161b0b39c406
      : end

      1 Reply Last reply Reply Quote 0
      • stephenw10S
        stephenw10 Netgate Administrator
        last edited by

        It could also be the host at 192.168.30.1 rejecting it.

        You should use a non-default password on the ASA. 😉

        Steve

        F 1 Reply Last reply Reply Quote 0
        • F
          franco22 @stephenw10
          last edited by

          @stephenw10 b01c20fe-5cd7-4bdf-a80f-7f58dd42785b-image.png

          1 Reply Last reply Reply Quote 0
          • stephenw10S
            stephenw10 Netgate Administrator
            last edited by

            Ok, why is it configured as mobile IPSec? That's a site-to-site tunnel.

            In that screenshot it is up at phase1 only. You need phase2 to be up to carry any traffic.
            But you said you could ping from the ASA to pfSense so it must have been up then.

            What exactly are you showing us there?

            Steve

            F 1 Reply Last reply Reply Quote 0
            • F
              franco22 @stephenw10
              last edited by

              @stephenw10 sorry bro i have completed the site to site VPN this was ipsec remote VPN config so you able to help with this plz..

              1 Reply Last reply Reply Quote 0
              • stephenw10S
                stephenw10 Netgate Administrator
                last edited by

                Ok, well it's not connected at phase 2 so check the IPSec logs for errors.

                How is it configured? What are you connecting to it with?

                Did you follow a guide for this?

                Steve

                F 1 Reply Last reply Reply Quote 0
                • F
                  franco22 @stephenw10
                  last edited by

                  @stephenw10
                  ASA and Pfsence connected in a same switch I want to do sla can u able to help with this

                  1 Reply Last reply Reply Quote 0
                  • stephenw10S
                    stephenw10 Netgate Administrator
                    last edited by

                    So you are still doing the site to site tunnel? Not mobile IPSec? (which is what I thought you meant by 'ipsec remote VPN').

                    Check the logs for errors on both sides.

                    Either the phase 2s do not match or you have no traffic there to bring them up.

                    Steve

                    1 Reply Last reply Reply Quote 0
                    • F
                      franco22 @JKnott
                      last edited by

                      @jknott hello How are You Can you Able to help with this issue pls asa and pfsence in same vlan and i have to do sla

                      1 Reply Last reply Reply Quote 0
                      • stephenw10S
                        stephenw10 Netgate Administrator
                        last edited by

                        In pfSense it should be no more difficult than adding firewall rule in IPSec to allow echo requests from whatever IP the ASA is using to send them.

                        Steve

                        F 1 Reply Last reply Reply Quote 0
                        • F
                          franco22 @stephenw10
                          last edited by

                          @stephenw10
                          Did You know about Haywire

                          1 Reply Last reply Reply Quote 0
                          • stephenw10S
                            stephenw10 Netgate Administrator
                            last edited by

                            Umm, probably not.
                            The film? I enjoyed it. 😉

                            Steve

                            1 Reply Last reply Reply Quote 0
                            • First post
                              Last post
                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.