2.5 upgrade is missing USB Ethernet (ue0)

vmb

@nollipfsense
Sadly the Realtek kernel module didn't work for me. I get a kernel panic, fatal trap 12: page fault while in kernel mode. The intel Atom based device I am using has a Realtek NIC on the motherboard.

Fortunately, the FreeBSD 11.3 kernel was still present and I could boot it to delete my /boot/loader.conf.local .

I have come up with a temporary workaround using a VLAN capable Ethernet switch that I have here. I can configure VLANs for WAN and LAN to use the same parent interface. Alternatively, I could use the unused Atheros WLAN as a separate interface for WAN. I have only ever used it to provide a temporary access point, never used it as a client before in pfSense.

stephenw10

The ure or re module? Did you try loading either in real time?

As I said the re module will not help you with a USB device, it's a PCI driver.

Steve

vmb

@stephenw10
Yes, I tried a kldload of if_re.ko . kldstat reported it was loaded but because my machine's onboard Ethernet adapter is a Realtek the in-kernel version had already grabbed the interface.

I am looking for a way to upgrade to 2.6.0 from the 2.5.0 console but I can't find a way of doing this using a URL for a 2.6.0 installer image.

stephenw10

Yes, you would need to add that line to the loader file to load the alternative re driver in preference to the in kernel driver.

You can't upgrade to an installer image. You could try toedit the pkg repo line in the config file, reboot to apply it, then upgrade using menu option 13.
Add or edit the line:

<pkg_repo_conf_path>/usr/local/share/pfSense/pkg/repos/pfSense-repo-devel.conf</pkg_repo_conf_path>

Re-installing to 2.6 directly would be better though.

Steve

vmb

@stephenw10
Thanks. I will try the repo line edit first. If it fails, I will install 2.6.0 from a flash drive.

vmb

Upgrading to 2.6.0 using the repo edit worked well. I have a running firewall again with USB Ethernet.

stephenw10

Nice. Still at the reduced speed though?

You should try adding ure in the loader file so it's present at boot if you have not already.

Steve

vmb

@stephenw10
It looks like it is being automatically detected

Id Refs Address                Size Name
 1   28 0xffffffff80200000  3ae8530 kernel
 2    1 0xffffffff83ce9000     97a0 cryptodev.ko
 3    1 0xffffffff83cf3000   3bb8f0 zfs.ko
 4    2 0xffffffff840af000     a448 opensolaris.ko
 5    1 0xffffffff840ba000     ef18 aesni.ko
 6    1 0xffffffff84311000     1000 cpuctl.ko
 7    1 0xffffffff84312000     3d00 if_ure.ko
 8    1 0xffffffff84316000      b28 coretemp.ko

dmesg shows ue0 binding to ure0 at full speed.

ure0 on uhub0
ure0: <Realtek USB 10/100/1000 LAN, class 0/0, rev 2.10/30.00, addr 2> on usbus0
miibus1: <MII bus> on ure0
rgephy1: <RTL8251/8153 1000BASE-T media interface> PHY 0 on miibus1
rgephy1:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto
ue0: <USB Ethernet> on ure0

A grep for ure on /boot/loader.conf turns up nothing. I am happy the adapter is working again as it did on 2.4.5 .

stephenw10

Ah, that looks good.

Does it report the correct link speed now? Typically it does not using the generic driver.

Steve

vmb

@stephenw10
ifconfig shows...

media: Ethernet autoselect (1000baseT <full-duplex>)

Web GUI says the same for the interface status.

vmb

I have upgraded my remaining 2.4.5p1 to 2.5.2 today and it correctly recognises the USB Ethernet adaptor using kernel module if_ure.ko .

vmb

@vmb I have upgraded my 2.5.2 installs to 2.6.0 today. The automatic notifications I have configured made it clear that 2.6.0 works better for me.