Has anyone found solution for ExpressVPN?

DaddyGo

@yv5 said in Has anyone found solution for ExpressVPN?:

OpenVPN client connect and getting remote an virtual IP
but

Hi,

First, ExpVPN gateways are not PING-capable (10.x.y.z) this is one of their features, unfortunately

That’s when I used to say don’t use a DNS server for a GW monitor, but you have to!!!

++++edit:

I've been an ExpVPN subscriber for 10 years now, I'm getting really tired of them, I'm trying SurfShark, but that's not the best also

It should also be used for EXpVPN:
cron (as root):

/usr/local/sbin/pfSsh.php playback svc restart openvpn client 1 (expvpn client number!!!!(

YV5

@daddygo Thanks for your comment

I apologize for my low profile of understanding DNS capabilities.

Do you use ExpressVPN and is working?
do you reccomend to buy surfshark?

I really appreciate your help

Jorge

Edit ++++

Where I have to put this?

/usr/local/sbin/pfSsh.php playback svc restart openvpn client 1

DaddyGo

@yv5 said in Has anyone found solution for ExpressVPN?:

I apologize for my low profile of understanding DNS capabilities.

VPN GW is down because ExpVPN GW is not responding to PING

@YV5 "Do you use ExpressVPN and is working?"

I've been an ExpVPN subscriber for 10 years now.....

@YV5 "do you reccomend to buy surfshark?"

Nope!!!

but I see you are Spanish,
does portuguese go to you?

YV5

@daddygo

hehehe

yes Spanish speaker

I have been around 7 years with ExpressVPN
I feel customer support is "low" tech

Honestly I appreciate your help

Thanks of lot

DaddyGo

@yv5 said in Has anyone found solution for ExpressVPN?:

I feel customer support is "low" tech

SurfShark is the same animal

for which I still use these.... (the parameters are very good, EVPN)

+++edit:

They write such nonsense

and L2TP, hahahahahahahahahahahahahahahahahahahaha!!!!

YV5

@daddygo

This is my Openvp Log

Mar 30 13:26:58 openvpn 13511 MANAGEMENT: Client disconnected
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: CMD 'status 2'
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: CMD 'state 1'
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: Client connected from /var/etc/openvpn/client1/sock
Mar 30 13:26:48 openvpn 13511 Initialization Sequence Completed

YV5

@daddygo @daddygo Is ti possible you post for me all your "basic" settings for ExpressVPN

I cant get its work unless I check "Disable Gateway Monitoring" in routing / edit gateway

Inmediatly I get 100% packets but not internet access

Gertjan

@yv5 said in Has anyone found solution for ExpressVPN?:

Mar 30 13:26:58 openvpn 13511 MANAGEMENT: Client disconnected
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: CMD 'status 2'
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: CMD 'state 1'
Mar 30 13:26:58 openvpn 13511 MANAGEMENT: Client connected from /var/etc/openvpn/client1/sock

Whe you open the pfSEbse dashboard,
and you have this OpenVPN widget shown,
it shows you information about the status of the connection.
This is what the "MANAGEMENT:" lines are all about.

bingo600

@daddygo
I'm a 3 years expvpn user , and have been quite satisfyed w. w. everything but the price.

I'm considering switching to Nord , as i have a few friends that are satisfyed w them.
And the 3/yr price is the same a 1/yr for exp

I'm using it for mobile devices w. the exp app , and instead of a pfS client connecting , i have a dedicated Vlan + SSID that has a Deb10 linux as gateway , so whatever i point the DEB10 at will be the exit node for my devices on the SSID.

I am not running any "Default Inet" via VPN (Yet ....)

/Bingo

DaddyGo

@bingo600 said in Has anyone found solution for ExpressVPN?:

I'm considering switching to Nord ,

I tried Nord, we didn't have such good network parameters here...
I suggest you sign up for a one-month plan and give it a try before you start bigger shopping

ExpVPN is still the best, but unfortunately their Portuguese IP range is narrow....
I got the same 3 IP address, for 7 years, it's not security...
They are restarted the services every 48 hours as the service runs in RAM and so the logs are also discarded
(this causes pfSense to not be able to reconnect and the VPN will remain down until I manually restart - or I have already automated this)

Theirs customer services Nord, SurfShark, ExpressVPN is a team trained in a 3-4 day course, they respond like a parrot, like auto -answer machine....hahahahahaha...

The game goes out to get you tired of communicating with them, and leaving them alone

DaddyGo

@yv5 said in Has anyone found solution for ExpressVPN?:

Is ti possible you post for me all your "basic" settings for ExpressVPN

Yup,

but first......
Here you will find everything, if you get stuck pls. write:

https://www.expressvpn.com/support/vpn-setup/pfsense-with-expressvpn-openvpn/

YV5

@gertjan Thanks

YV5

@daddygo

I have followed it ...think 10-15 time with no luck

after finish I got not internet connection
although I got some IP

addicional things I have done

in routing, modified

Disable Gateway Monitoring Action --> check
Monitoring IP 1.1.1.1

after those modification I get on dashboard
0% packets loss / online / greeen

but not internet

YV5

@daddygo said in Has anyone found solution for ExpressVPN?:

@yv5 said in Has anyone found solution for ExpressVPN?:

I apologize for my low profile of understanding DNS capabilities.

VPN GW is down because ExpVPN GW is not responding to PING

@YV5 "Do you use ExpressVPN and is working?"

I've been an ExpVPN subscriber for 10 years now.....

@YV5 "do you reccomend to buy surfshark?"

Nope!!!

but I see you are Spanish,

Yes I speak Spanish

does portuguese go to you?

I do speak Portugues too

bcruze

Open a ticket with them and ask what version of open vpn they are running. I’d like to see an official answer

I’ll betcha it’s 2.4 still

Gertjan

I have an Expr*sVPN account for several years now, which I can use to change my WAN IP @work, if needed.
My need is : I've some dedicated servers in some data centers, and for testing purposes its good to change the IP some times.
My @work IP isn't 'officially' static, but didn't change for the last 3 or 4 years. When I manged to blacklist myself on my own server, I need a Plan B.

This is what I have right now :

The IP used is one of the Expr*ssVPN servers in Paris, as I'm situated in the south of France.

I'm running right now pfSense 2.5.0 :

I activated the client yesterday :
It connected.

(Note :my OpenVPN server also runs - no big deal - pfSense can do both at the same time)

The OpenVPN client log is pretty clean :

Apr  1 07:51:51 pfsense openvpn[37478]: WARNING: Compression for receiving enabled. Compression has been used in the past to break encryption. Sent packets are not compressed unless "allow-compression yes" is also set.
Apr  1 07:51:51 pfsense openvpn[37478]: WARNING: file '/var/etc/openvpn/client2/up' is group or others accessible
Apr  1 07:51:51 pfsense openvpn[37478]: OpenVPN 2.5.0 amd64-portbld-freebsd12.2 [SSL (OpenSSL)] [LZO] [LZ4] [MH/RECVDA] [AEAD] built on Feb  5 2021
Apr  1 07:51:51 pfsense openvpn[37478]: library versions: OpenSSL 1.1.1i-freebsd  8 Dec 2020, LZO 2.10
Apr  1 07:51:51 pfsense openvpn[37784]: MANAGEMENT: unix domain socket listening on /var/etc/openvpn/client2/sock
Apr  1 07:51:51 pfsense openvpn[37784]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Apr  1 07:51:51 pfsense openvpn[37784]: WARNING: experimental option --capath /var/etc/openvpn/client2/ca
Apr  1 07:51:51 pfsense openvpn[37784]: Outgoing Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Apr  1 07:51:51 pfsense openvpn[37784]: Incoming Control Channel Authentication: Using 512 bit message hash 'SHA512' for HMAC authentication
Apr  1 07:51:51 pfsense openvpn[37784]: TCP/UDP: Preserving recently used remote address: [AF_INET]45.91.22.2:1195
Apr  1 07:51:51 pfsense openvpn[37784]: Socket Buffers: R=[42080->524288] S=[57344->524288]
Apr  1 07:51:51 pfsense openvpn[37784]: UDPv4 link local (bound): [AF_INET]192.168.10.3:0
Apr  1 07:51:51 pfsense openvpn[37784]: UDPv4 link remote: [AF_INET]45.91.22.2:1195
Apr  1 07:51:51 pfsense openvpn[37784]: TLS: Initial packet from [AF_INET]45.91.22.2:1195, sid=1aee146b a5b8f564
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY WARNING: depth=0, unable to get certificate CRL: C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=Server-2776-4a, emailAddress=support@expressvpn.com
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY WARNING: depth=1, unable to get certificate CRL: C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=ExpressVPN CA, emailAddress=support@expressvpn.com
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY OK: depth=1, C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=ExpressVPN CA, emailAddress=support@expressvpn.com
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY KU OK
Apr  1 07:51:51 pfsense openvpn[37784]: Validating certificate extended key usage
Apr  1 07:51:51 pfsense openvpn[37784]: ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY EKU OK
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY X509NAME OK: C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=Server-2776-4a, emailAddress=support@expressvpn.com
Apr  1 07:51:51 pfsense openvpn[37784]: VERIFY OK: depth=0, C=VG, ST=BVI, O=ExpressVPN, OU=ExpressVPN, CN=Server-2776-4a, emailAddress=support@expressvpn.com
Apr  1 07:51:51 pfsense openvpn[37784]: Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 2048 bit RSA
Apr  1 07:51:51 pfsense openvpn[37784]: [Server-2776-4a] Peer Connection Initiated with [AF_INET]45.91.22.2:1195
Apr  1 07:51:52 pfsense openvpn[37784]: SENT CONTROL [Server-2776-4a]: 'PUSH_REQUEST' (status=1)
Apr  1 07:51:53 pfsense openvpn[37784]: PUSH: Received control message: 'PUSH_REPLY,redirect-gateway def1,dhcp-option DNS 10.104.0.1,comp-lzo no,route 10.104.0.1,topology net30,ping 10,ping-restart 60,ifconfig 10.104.0.134 10.104.0.133,peer-id 257'
Apr  1 07:51:53 pfsense openvpn[37784]: Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Apr  1 07:51:53 pfsense openvpn[37784]: Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Apr  1 07:51:53 pfsense openvpn[37784]: Options error: option 'route' cannot be used in this context ([PUSH-OPTIONS])
Apr  1 07:51:53 pfsense openvpn[37784]: OPTIONS IMPORT: timers and/or timeouts modified
Apr  1 07:51:53 pfsense openvpn[37784]: OPTIONS IMPORT: compression parms modified
Apr  1 07:51:53 pfsense openvpn[37784]: OPTIONS IMPORT: --ifconfig/up options modified
Apr  1 07:51:53 pfsense openvpn[37784]: OPTIONS IMPORT: peer-id set
Apr  1 07:51:53 pfsense openvpn[37784]: OPTIONS IMPORT: adjusting link_mtu to 1629
Apr  1 07:51:53 pfsense openvpn[37784]: Using peer cipher 'AES-256-CBC'
Apr  1 07:51:53 pfsense openvpn[37784]: Outgoing Data Channel: Cipher 'AES-256-CBC' initialized with 256 bit key
Apr  1 07:51:53 pfsense openvpn[37784]: Outgoing Data Channel: Using 512 bit message hash 'SHA512' for HMAC authentication
Apr  1 07:51:53 pfsense openvpn[37784]: Incoming Data Channel: Cipher 'AES-256-CBC' initialized with 256 bit key
Apr  1 07:51:53 pfsense openvpn[37784]: Incoming Data Channel: Using 512 bit message hash 'SHA512' for HMAC authentication
Apr  1 07:51:53 pfsense openvpn[37784]: TUN/TAP device ovpnc2 exists previously, keep at program end
Apr  1 07:51:53 pfsense openvpn[37784]: TUN/TAP device /dev/tun2 opened
Apr  1 07:51:53 pfsense openvpn[37784]: /sbin/ifconfig ovpnc2 10.104.0.134 10.104.0.133 mtu 1500 netmask 255.255.255.255 up
Apr  1 07:51:53 pfsense openvpn[37784]: /usr/local/sbin/ovpn-linkup ovpnc2 1500 1629 10.104.0.134 10.104.0.133 init
Apr  1 07:51:56 pfsense openvpn[37784]: Initialization Sequence Completed

The tunnel was up.

Note the 3 lines :

Options error: option 'redirect-gateway' cannot be used in this context ([PUSH-OPTIONS])
Options error: option 'dhcp-option' cannot be used in this context ([PUSH-OPTIONS])
Options error: option 'route' cannot be used in this context ([PUSH-OPTIONS])

Normally, you should stop and resolve everything that says "error".
These 3 errors are already mentioned and explained (solved ?) else where on this forum and a future solution https://redmine.pfsense.org/issues/11448 ( I didn't bother installing that patch).

For now, I just make it short :
The route, we deal with that ourself - see below.
Same thing for dhcp-option : our clients will take care of things.
redirect-gateway : see the firewall LAN(s) rule below. We deal with it.
These 3 errors are actually no show stoppers.

I assigned the interface created by the running OpenVPN Client instance :

So now I have an interface called "EXPRSSVPN"
Note : just invent a name, I did not set any IPv4 or IPv6 info. Totally comprehensible, as this info is coming from the OPENVPN server (ExpssVPN). The tunnel doesn't support IPv6.

The Gateway widget shows :

Note : AP1 is some test thing for myself. I'm using dpinger to test a device on one of my local networks.

The last line shows the VPN connection to Expr*ssVPN's server is - looks (?) - ok.

The WAN_DHCPV4 is still my default IPv4 gateway.
The HE_TUN_TUNNELV6 is still my default IPv6 gateway (which means that all local outbound IPv6 traffic, which is half of all my traffic, will still 'leak' through the IPv6 gateway (to an IPv6 he.net endpoint in Paris also)

My original IPv4 and IPv6 gateway are NOT changed - and will note change.

I guess it is possible to change the IPv4 gateway for the EXP*SSVPN_IPV4 gateway (our openclient client) to simplify the setup.
I'll have a look at that in the future.

Normally, I never go any further.

Yesterday, I decides to go on, and see why people are saying that Expr*ssVPN doesn't work with "pfSense 2.5.0".
Because pfSense uses the recent (not latest !) OpenVPN version 2.5.0-amd64 ?
Something else ?

I know how the story goes on :

Go to : Firewall > NAT > OutboundSwitch to the third option ( == Manual Outbound NAT rule generation. (AON - Advanced Outbound NAT) )
Then, on that same page, duplicate all ( all of them, is that needed / useful ??) lines listed in the Mappings table and change interface "WAN' to ''EXPR*SSVPN".

Final result :

I have to add a firewall rule to my LAN interface - at the top (make things work first), so it's taken in account immediately (still, do not forget to check floating rules - disable all/some floating rules during test phase) :

A small test, because I'm always optimistic in the morning :

That's not my normal WAN IP, it's the Expr*ss VPN IP.
It works.

Edit : This starts to look like another pfSense success story.

A speed test :

That's awful. A MTU issue ? whatever,it's usable. I'll check that later on.
My normal ISP speed is a whopping 23 Mbits/sec (VDSL) - a very correct speed when you are situation in the middle of very rural south west France .

Note : the fibre is just outside of the door : it's ready to be hooked up to our installation, but the French president just announced yesterday another 4 week lock-down so nothings will get done this month.
But it works. As advertised.

Extra steps I took :

What I find important :
When setting up things, I like to compare settings. The differences will explain the "no--go".

These are the settings (opvn file) you have to download from the Exp*ssVPN site - login as a registered user and you can get it :

dev tun
fast-io
persist-key
persist-tun
nobind
remote france-strasbourg-ca-version-2.expressnetw.com 1195
remote-random
pull
comp-lzo no
tls-client
verify-x509-name Server name-prefix
ns-cert-type server
key-direction 1
route-method exe
route-delay 2
tun-mtu 1500
fragment 1300
mssfix 1200
verb 3
cipher AES-256-CBC
keysize 256
auth SHA512
sndbuf 524288
rcvbuf 524288
auth-user-pass

( I removed the cert details that Expr*ssVPN includes, the cert info should be used in the pfSEnse GUI to create the CA and the certificate, and these are used in the GUI OpenVPN client settings )

Here is the pfSense OpenVPN opvn file which you can find here :

/var/etc/openvpn/client1

"client1" could also be "client2" - or 3, depends, if you have more then one OpenVPN client set up.

The file is called :
config.opvn

My /var/etc/openvpn/client2/config.opvn :

dev ovpnc2
verb 3
dev-type tun
dev-node /dev/tun2
writepid /var/run/openvpn_client2.pid
#user nobody
#group nobody
script-security 3
daemon
keepalive 10 60
ping-timer-rem
persist-tun
persist-key
proto udp4
auth SHA512
up /usr/local/sbin/ovpn-linkup
down /usr/local/sbin/ovpn-linkdown
local 192.168.10.3
tls-client
client
lport 0
management /var/etc/openvpn/client2/sock unix
remote 45.91.22.2 1195 udp4
auth-user-pass /var/etc/openvpn/client2/up
capath /var/etc/openvpn/client2/ca
cert /var/etc/openvpn/client2/cert 
key /var/etc/openvpn/client2/key 
tls-auth /var/etc/openvpn/client2/tls-auth 0
data-ciphers AES-256-CBC
data-ciphers-fallback AES-256-CBC
allow-compression asym
comp-lzo yes
resolv-retry infinite
route-nopull
fast-io
sndbuf 524288
rcvbuf 524288


verify-x509-name Server name-prefix
remote-cert-tls server
key-direction 1
route-delay 2
tun-mtu 1500
fragment 1300
mssfix 1450
auth-nocache

The last 8 lines are added like this :

Now look at this :

some of these are already in the pfSense fabricated config.opvn file.
I remove them.

And that's about it.

I rebooted pfSense.
My IPv4 was :

which is a "EXP*SSVPN" IP in Paris - not my WAN IP (ISP Orange)

About the "Data Encryption Negotiation" setting and "Data Encryption Algorithms" :

So, what is it that you guys did, that I didn't, so it works for me but not for you ?

Again, I'm using a vanilla pfSense 2.5.0.
Followed the somewhat outdated https://www.expressvpn.com/fr/support/vpn-setup/pfsense-with-expressvpn-openvpn/
Inspected the logs,
Compared the config files proposed and used,
Fired up the openVPN client,
Assigned an "openvpncx" interface,
Changed to NAT outbound manual mode (a mappings),
Did a minimal "LAN" (my 192.168.1.0/24) redirect.
Tested it, works,
Rebooted, still works,
Done

Again : normally, I don't use my ExpssVPN account to redirect my entire 'work' network. I don't have to do so. Never found a reason that convinced me to do so. I don't care that my 'resolver mode' DNS transmits very visible 'youprn.hub' DNS requests coming from the captive portal (remember : work = a hotel with clients in the rooms using my Internet connection).
Maybe, as it works now, I could redirect my captive portal traffic over VPN, and use an IP from Expr*ssVPN IP somewhere outside of Europe. No more issues when some one downloads the latest Disney movie over my Internet connection, something that has consequences when you use a European ISP connection. I'll think about it (better have that fibre first).

Gertjan

So, no more Expr**VPN issues ?
Or was I just lucky while using a Expr*ssVPN server "france-strasbourg-ca-version-2.expressnetw.com 1195" (Paris)

YV5

@gertjan

ça va? gertja!!

mon ami ---> you're THE MAN

your post solve all my problems with Expressvpn

merci!!!

Jorge

DaddyGo

@yv5 said in Has anyone found solution for ExpressVPN?:

I have followed it ...think 10-15 time with no luck

Sorry for my late reply, the OVH DC (French) fire, caused a lot of work for me, but I see @Gertjan helped