I Can't seem to open any Ports?

Datastream101

Thanks for this, I know it used to work, for example when I set up a "killing floor 2" server It was easy, and my CCTV etc. also had this "pi node" working as well. Only thing that I changed or done was updated Pfsense and then loaded my config file back in.

Looks like packets are making it the WAN. So that's a good thing!

johnpoz

Well that is not the 18080 port your saying your trying to forward.. But yeah that validates that 31400 is getting to your wan.

Make sure you test via the port your wanting to forward.

Datastream101

@johnpoz Thanks, Yeah I was just trying 31400 as that's the Pi Node.

Tried the other port which is for the "Monero" app. 18080

07-04-2021 11-55-50.jpg

07-04-2021 11-53-52.jpg

Looks like it's hitting the WAN.

Thanks again for your help.

viragomann

@datastream101
Okay, now you see packets hitting your WAN IP (I guess) on port 18080, but there is no response.
You should also see response packets from your WAN address 18080 to the remote address.

Now do a capture on the internal interface to see if the packets are forwarded correctly and if your internal device is responding. Best to do two captures simultanously on WAN and LAN (or whatever interface is facing to the destination device). So if there are packets arriving on the WAN you should also see it on the internal interface.

Datastream101

@viragomann All sorted thanks so much. after doing what you said I could see packets hitting the WAN and the LAN....so it had to be PC related. (I've never done this before so that was good to learn how to send packets to the WAN and the LAN and monitor them)

I removed and re-installed "Docker" on the PC, fired up the Pi Node (which had ports 31400 - 31409 blocked) and it worked. docker for some reason just had them ports blocked.

Thanks for the tip on putting destination as WAN as you mentioned earlier, it would have never worked the way I had it configured.

"Monero" which had port 18080 is working great....

Once again thanks for taking your patience with a n00b.

Much appreciated.

johnpoz

Glad you got it sorted.. Once you know how it works, and the basics - it really only takes a couple of minutes to figure out where the problem is..

Wan check first, if there - then lan - if sending on, then its downstream of pfsense.

Good reference
https://docs.netgate.com/pfsense/en/latest/troubleshooting/nat.html

https://docs.netgate.com/pfsense/en/latest/troubleshooting/nat-port-forwards.html

Datastream101

@johnpoz Brilliant! Can I donate?, haven't got much as the "plandemic" destroyed my business, my life and my future.! but hey can always send something :)

I for the past what maybe 6 or 7 years wanted to install Pfsense and last year in lockdown I did, I should of had it years ago! Had an old laptop that finally became my router...

Love the menu's the lay out the charts the configs, I'm a nerd for stuff like this...lol, and yes the support is awesome!

Brilliant piece of software!

johnpoz

While they use to have a gold subscription you could get for $99 as a way of showing support. They really have never just had a donate sort of button.

Currently the best way to support is buy netgate hardware, or a support contract.

If you want to throw a few bucks towards the cause - you could donate to the freebsd foundation.. Which rolls downhill towards.. If freebsd is better, pfsense will end up better since pfsense runs on freebsd..

https://freebsdfoundation.org/

viragomann

@datastream101
Glad it's working now. Thanks for feedback.

I guess, you've learned your lesson. We all had to start once with that stuff.

Datastream101

@johnpoz Thanks, that's a shame, maybe they could have a "Donate" button,

I always used "negate" routers for VPN's where I used to work. No bull shit, also had a dual wan load balancer at home, that was neat, loved the lights...lol

What about...