Problems after upgrading sg-1100 system
-
I used sg-1100 as my home router, but I didn't respond when I tried to install the plug-in pfblocker ng devel. Later, I upgraded the system online from version 2.4.5 to 21.01, which took me about two hours. Finally, the upgrade was successful. I restart and then install pfblocker ng devel V3.0.0 again_ 16 plug-in, display the following error message, please compare how to deal with.
"Fatal rror. Uncaught Error: Call to undefined function curl file .create0 in /etc/inc/ac.inc:279 Stack trace: #0 /et/inc/config. lib inc(689): upload config(false) #1
/usr/local/www/pkg. mgr. install. php(574); write. .config(\xE5\x9C\xA8\xE5\xAE\x89\xE8\xA3\x85\xE5\x89\x8D\xE5\x88\x9B..) #2 {main} thrown in /etc/inc/acb inc on line 279 PHP
ERROR: Type: 1, File: /etc/inc/acb.inc, Line: 279, Message: Uncaught Error Call to undefined function cur. file create0 in /etc/inc/acb.inc:279 Stack trace: #O
/etc/inc/config libi inc(689); upload config(false) #1 /ust/ocal/www/pkg. mgr. isalphp(574): write. .confg(\xE5\x9C\xA8\xE5\xAEVx89\xE8\xA3\x85\xE5\x89x8D\xE5\x88\x9..).
#2 (main} thrown" -
If the sg-1100 original system version 2.4.5 is restored, do I need to delete the plug-ins installed by default and then update the system to version 21.01. Thank you for your help.
-
If that message was copied and pasted exactly, then it sounds like you have a hardware issue since there are a lot of missing or transposed characters in that error, which is typically indicative of a memory problem or similar issue.
If you typed that out and didn't transcribe it exactly, it's more difficult to say but looks like a problem with the installation in general. You should wipe and reload it to be certain it's using the most recent version and has a clean filesystem.
-
I have successfully refreshed the system with the USB mirror package, and all the plug-in problems have been perfectly solved. Obviously, the last online upgrade of the system was not too successful. The hard reset button behind the Sg-1100 cannot restore the pf system to the factory leaving state of the device, and must be manually refreshed. Thank you for Netgate's technical support. it's great.
-