Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    Kerberos Squid without authentication?

    Scheduled Pinned Locked Moved Cache/Proxy
    39 Posts 3 Posters 5.1k Views
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M
      mcury @killmasta93
      last edited by mcury

      You can leave the authentication tab in Squid disabled, and use the ldapusersearch mentioned above in Squidguard.
      The popup will disappear if you do it correctly.

      I never tried to block using only Squid , so unfortunately I can't help you..

      dead on arrival, nowhere to be found.

      K 1 Reply Last reply Reply Quote 0
      • K
        killmasta93 @mcury
        last edited by killmasta93

        @mcury
        Thanks for the reply, so i used the ldapusersearch

        ldapusersearch ldap://apolo.casa.local:3268/dc=casa,dc=local?userPrincipalName?sub?(&(memberof=%2cCN=Users%2cDC=casa%2cDC=local)(userPrincipalName=%s))

        8fafaf1d-0f94-4479-9e00-922244df6db8-image.png
        and this is the location of the users

        CN=Users,DC=casa,DC=local

        but im still getting the popup

        i checked the squid logs so i think im missing something on squid

        93213b96-d216-40cb-9285-31df50eea5f5-image.png

        Tutorials:

        https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

        M 1 Reply Last reply Reply Quote 0
        • M
          mcury @killmasta93
          last edited by mcury

          @killmasta93 Is the ticket being generated?
          If the client is a domain member, and everything is configured correctly, the HTTP ticket will appear in klist..

          Check and confirm if the path to the proxy inside Internet Explorer (Windows proxy configuration), is set correctly.

          Are you using Samba and DNS backend ?
          If so there are some tests you can do, check the Kerberos part in the link below, also perform the DNS tests to confirm if everything is set up as it should be.

          https://wiki.samba.org/index.php/Setting_up_Samba_as_an_Active_Directory_Domain_Controller

          dead on arrival, nowhere to be found.

          K 1 Reply Last reply Reply Quote 0
          • K
            killmasta93 @mcury
            last edited by

            @mcury

            Thanks for the reply, as the proxy this is how i have it configured
            626c4e7a-d589-43d3-af92-70d39dbff1e7-image.png

            when i open chrome and then check the klist i get the ticket

            C:\Users\administrador.CASA>klist

El id. de inicio de sesión actual es 0:0xb410d

Vales almacenados en caché: (2)

#0>     Cliente: administrador @ CASA.LOCAL
        Servidor: krbtgt/CASA.LOCAL @ CASA.LOCAL
        Tipo de cifrado de vale Kerberos: RSADSI RC4-HMAC(NT)
        Marcas de vale 0x40e00000 -> forwardable renewable initial pre_authent
        Hora de inicio: 5/8/2021 16:21:07 (local)
        Hora de finalización:   5/9/2021 2:21:07 (local)
        Hora de renovación: 5/15/2021 16:21:07 (local)
        Tipo de clave de sesión: RSADSI RC4-HMAC(NT)
        Marcas de caché: 0x1 -> PRIMARY
        KDC llamado: apolo.casa.local

#1>     Cliente: administrador @ CASA.LOCAL
        Servidor: LDAP/apolo.casa.local/casa.local @ CASA.LOCAL
        Tipo de cifrado de vale Kerberos: RSADSI RC4-HMAC(NT)
        Marcas de vale 0x40ac0000 -> forwardable renewable pre_authent ok_as_del
egate 0x80000
        Hora de inicio: 5/8/2021 16:21:07 (local)
        Hora de finalización:   5/9/2021 2:21:07 (local)
        Hora de renovación: 5/15/2021 16:21:07 (local)
        Tipo de clave de sesión: RSADSI RC4-HMAC(NT)
        Marcas de caché: 0
        KDC llamado: apolo.casa.local

            But not sure what else im doing wrong, currently running zentyal as my domain controller

            Thank you

            Tutorials:

            https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

            M 1 Reply Last reply Reply Quote 0
            • M
              mcury @killmasta93
              last edited by

              @killmasta93 Dirección, you set the IP, told you to use the hostname and not the IP.
              Change that 192.168.3.254 and use the proxy hostname, hostname.casa.local

              dead on arrival, nowhere to be found.

              K 1 Reply Last reply Reply Quote 0
              • K
                killmasta93 @mcury
                last edited by

                @mcury
                thanks for the reply so i changed to hostname but still get the popup

                76ca37e5-c84e-459b-9230-1505e87c098e-image.png

                i also checked if the get the ticket

                im not sure if the above steps when configuring squid i did it correctly which i think might be the problem?

                aaaab9e1-d75a-4718-84ad-0a96e44eb770-image.png

                Tutorials:

                https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                M 1 Reply Last reply Reply Quote 0
                • M
                  mcury @killmasta93
                  last edited by

                  Check if your pfsense can perform the following command successfully.

                  kninit administrator

                  If it works, update here and we follow from that.

                  dead on arrival, nowhere to be found.

                  K 1 Reply Last reply Reply Quote 0
                  • K
                    killmasta93 @mcury
                    last edited by

                    @mcury
                    Thanks for the reply this is what i get

                    [2.4.5-RELEASE][root@Olympus.casa.local]/root: kinit administrador
administrador@CASA.LOCAL's Password: 
[2.4.5-RELEASE][root@Olympus.casa.local]/root: klist
Credentials cache: FILE:/tmp/krb5cc_0
        Principal: administrador@CASA.LOCAL

  Issued                Expires               Principal
May  9 20:09:35 2021  May 10 06:09:35 2021  krbtgt/CASA.LOCAL@CASA.LOCAL

                    Tutorials:

                    https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                    M 1 Reply Last reply Reply Quote 0
                    • M
                      mcury @killmasta93
                      last edited by mcury

                      Now check if your pfsense can perform these commands:
                      Assuming that olympus is the hostname of the AD DNS server and the domain is casa.local

                      host -t SRV _ldap._tcp.casa.local.
host -t SRV _kerberos._udp.casa.local.
host -t A olympus.casa.local.

                      I would remove these lines from krb5.conf to test:
                      You will need to generate a new keytab after changing these settings

                      default_tgs_enctypes = aes128-cts-hmac-sha1-96
default_tkt_enctypes = aes128-cts-hmac-sha1-96
permitted_enctypes = aes128-cts-hmac-sha1-96

                      dead on arrival, nowhere to be found.

                      K 1 Reply Last reply Reply Quote 0
                      • K
                        killmasta93 @mcury
                        last edited by

                        @mcury said in Kerberos Squid without authentication?:

                        host -t A olympus.casa.local.

                        Thanks for the reply, as for the AD DNS the server is called apolo which has an ip of 192.168.3.150 and olympus is the pfsense with IP 192.168.3.254

                        i ran the following commands without removing the lines and seemed to worked

                        [2.4.5-RELEASE][root@Olympus.casa.local]/root: host -t SRV _ldap._tcp.casa.local.
_ldap._tcp.casa.local has SRV record 0 100 389 apolo.casa.local.
[2.4.5-RELEASE][root@Olympus.casa.local]/root: host -t SRV _kerberos._udp.casa.local.
_kerberos._udp.casa.local has SRV record 100 100 88 apolo.casa.local.
_kerberos._udp.casa.local has SRV record 0 100 88 apolo.casa.local.
[2.4.5-RELEASE][root@Olympus.casa.local]/root: host -t A apolo.casa.local.
apolo.casa.local has address 192.168.3.150

                        Tutorials:

                        https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                        M 1 Reply Last reply Reply Quote 0
                        • M
                          mcury @killmasta93
                          last edited by

                          @killmasta93 said in Kerberos Squid without authentication?:

                          [2.4.5-RELEASE][root@Olympus.casa.local]/root: host -t SRV _kerberos._udp.casa.local.
                          _kerberos._udp.casa.local has SRV record 100 100 88 apolo.casa.local.
                          _kerberos._udp.casa.local has SRV record 0 100 88 apolo.casa.local.

                          I would remove the following lines from krb5.conf to test:
                          You will need to generate a new keytab after that, then replace the keytab in pfsense, and logout and login again with the client to test.

                          Following lines to remove will use the default enctypes.
                          default_tgs_enctypes = aes128-cts-hmac-sha1-96
                          default_tkt_enctypes = aes128-cts-hmac-sha1-96
                          permitted_enctypes = aes128-cts-hmac-sha1-96

                          dead on arrival, nowhere to be found.

                          K 1 Reply Last reply Reply Quote 0
                          • K
                            killmasta93 @mcury
                            last edited by

                            @mcury
                            Thanks for the reply, so did the following deleted the following lines and recreated the keytab but same issue

                            1e13ead3-f8da-481e-bc43-4c9b1dc26d83-image.png

                            993a40a7-81b3-4982-a5d0-3b8cf8bee96b-image.png

                            7b88e87e-2a79-45b4-bbd4-3962f014576d-image.png

                            Tutorials:

                            https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                            M 1 Reply Last reply Reply Quote 0
                            • M
                              mcury @killmasta93
                              last edited by

                              auth_param negotiate program /usr/local/libexec/squid/negotiate_kerberos_auth -d -k /usr/local/etc/squid/squidkeytab.keytab
                              auth_param negotiate children 1000
                              auth_param negotiate keep_alive on
                              acl auth proxy_auth REQUIRED
                              http_access deny auth
                              http_access allow auth

                              name is squidkeytab.keytab and not squidproxy.keytabb ?

                              dead on arrival, nowhere to be found.

                              K 1 Reply Last reply Reply Quote 0
                              • K
                                killmasta93 @mcury
                                last edited by

                                @mcury
                                Thanks for the reply, just realized that it was an error but after changing same issue

                                c94d8927-3857-4fc6-85b0-4ef09f37aabd-image.png

                                Tutorials:

                                https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                                M 1 Reply Last reply Reply Quote 0
                                • M
                                  mcury @killmasta93
                                  last edited by

                                  df438830-1f39-49e6-a13d-748436058fb2-image.png
                                  This is the ticket that should appear in klist..

                                  Everything seems to be OK with your configuration, at least between pfsense and AD.

                                  Show squid logs again after changing the keytab.
                                  Can you test with another client?

                                  dead on arrival, nowhere to be found.

                                  K 1 Reply Last reply Reply Quote 0
                                  • K
                                    killmasta93 @mcury
                                    last edited by

                                    @mcury
                                    Thanks again for the reply, so im trying another machine which is in the domain but same issue

                                    aed2b95d-d81f-417c-b591-85de356c47f9-image.png

                                    32bd5b2a-74ea-4215-ab8b-4c65081e31db-image.png

                                    Tutorials:

                                    https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                                    M 1 Reply Last reply Reply Quote 0
                                    • M
                                      mcury @killmasta93
                                      last edited by

                                      Did you create the user and enabled it in AD ?

                                      8cbf2dcb-d511-4859-a23d-79155901eca4-image.png

                                      dead on arrival, nowhere to be found.

                                      K 1 Reply Last reply Reply Quote 0
                                      • K
                                        killmasta93 @mcury
                                        last edited by

                                        @mcury
                                        Thanks for the reply, correct already did that
                                        on the Service principal name

                                        f9688ac1-9018-4ebd-8b50-23e2c29f4c76-image.png

                                        Tutorials:

                                        https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                                        M 1 Reply Last reply Reply Quote 0
                                        • M
                                          mcury @killmasta93
                                          last edited by mcury

                                          Maybe you are facing the same problem as this guy was, take a look:

                                          http://squid-web-proxy-cache.1019090.n4.nabble.com/squid-kerb-auth-received-type-1-NTLM-token-td2131613.html

                                          Quote:
                                          You should see a request from the client to Active Directory asking for a TGS for HTTP/<fqdn of proxy>. If that does not happen or get refused by AD the client will fall back to NTLM (wrapped into the Negotiate response) which is waht you see on the proxy.

                                          I would set a packet capture like that guy did to check, port 88

                                          dead on arrival, nowhere to be found.

                                          K 1 Reply Last reply Reply Quote 0
                                          • K
                                            killmasta93 @mcury
                                            last edited by

                                            @mcury
                                            Finally got it to authenticate but im still getting the popup

                                            525feae3-d657-4d22-b5de-aa1e3611b3fd-image.png

                                            Tutorials:

                                            https://www.mediafire.com/folder/v329emaz1e9ih/Tutorials

                                            M 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post
                                            Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.