Error when using port aliases in NAT in Beta3

[msamblanet]

Just upgraded from Beta2 to Beta3 and imported my old config (clean install, import old config backup)

If I add the following single port NAT using an alias I get the error below - if I use the port # instead of the alias it works…Not a huge deal but was slightly confusing when I brought up my old config  ???

If I can do anything further to help you troubleshoot, just let me know...

Rule:
WAN to Interface Address, UDP, From Teamspeak (alias for 8767), NAT to 10.11.12.16, Localport Teamspeak

ERROR:

php: : There were error(s) loading the rules: no IP address found for 10.11.12.16:* /tmp/rules.debug:117: could not parse host specification pfctl: Syntax error in config file: pf rules not loaded - The line in question reads* :

Line from rules.debug when failing:

rdr on rl0 proto udp from any to 68.100.12.254 port 8767:20000 -> 10.11.12.16:*

Line from working rules.debug:

rdr on rl0 proto udp from any to 68.100.12.254 port { 8767 } -> 10.11.12.16 port 8767

[sullrich]

Is :20000  really the range you want or is it an error somehow?

Also is reflection turned on in system -> advanced?  If so, please try turning it off and see if the problem persists.

[msamblanet]

Nope - just trying to NAT a single port.

Will try turning off the reflection tongiht.

[msamblanet]

Actually had a second just now and turned off reflection (I didn't actually need/want it anyways) - same error however…

BTW - is there anyplace in the GUI I can view on a full screen the notices and generated rules?  If not would be a nice future feature :)

[hoba]

diagnsotics>edit file, open "/tmp/rules.debug"

[msamblanet]

:-[ Well, I feel stupid now - entirely forgot about the view file feature - Thanks for pointing it out :-[