Watchguard T55
-
I have new watchguard firewalls here that nobody use anymore. The models are M270, M470 and T55. INstalling pfsense to the m470 is easy going. Than i switched the msata card to the t55 and no ethernet interface is detected via console session. There is one igb interface with a mac address at the end 00:00:00. I read about it in the T70 forum. I attach some pictures and the bootlog from my t55. Can ther something be done with the jumpers on the board?
[0_1626357551127_WatchguardOS-T55.bootlog](Uploading 100%) -
[0_1626357711186_WatchguardOS-T55.bootlog](Uploading 100%) WatchguardOS-T55.zip
-
@kr81 said in Watchguard T55:
Can ther something be done with the jumpers on the board?
Probably not if it's anything like the T70, and it looks like it's exactly like that.
What does the pfSense boot log show?
You could probably use a similar hack to start the switch as an unmanaged device but that's not really very helpful if you only have one interface!
Steve