Screen resolution - why do I need to ask for this here?

This post is deleted!

johnpoz

@avandel-0 said in Screen resolution - why do I need to ask for this here?:

it runs on Freebsd, another Linux .......

freebsd is not another linux ;)

This post is deleted!

This post is deleted!

johnpoz

Not sure what your not understanding about freebsd which pfsense runs on is NOT linux.. You seem to have some hatred for linux.. Which has zero to do with freebsd.

If you want to ask how to use a 55 TV for a monitor to a console based OS, and have it display correctly.. You prob be better off asking in TV related forum..

I would be willing to help you... But I have never, nor ever plan on using a 55 TV as monitor for my freebsd, or linux os.. Nor would I do such a thing even for windows..

I have never had any issues installing any bsd or linux OS using the appropriate device to display the output..

This post is deleted!

johnpoz

@avandel-0 said in Screen resolution - why do I need to ask for this here?:

what is it then??????

Its freebsd, which is a BSD derived OS.. https://en.wikipedia.org/wiki/Berkeley_Software_Distribution

as to sudo
https://en.wikipedia.org/wiki/Sudo

I have no idea what is wrong with your setup... you have really done nothing but bitch about linux ;)

freebsd, and really any bsd for that matter netbsd, openbsd are not really known for graphics. I don't recall ever using any hdmi connected monitor with any that I have used or even played with.. Support for hdmi could be hit or miss I would guess..

You might have better luck just using console via your PC to install with..

https://docs.netgate.com/pfsense/en/latest/hardware/connect-to-console.html

@johnpoz yeah, bitching is what I usually do all the time......
but never mind, I will not bother you again..... serial.....lol

stephenw10

I have tried to do this exactly one time when I was in a similar situation, the only HDMI display device I had to hand was a huge TV. It failed completely when it initialised the graphics drivers and tried to display at 4K!
But before that it was fine once I had added some settings for the default screen resolution in the TV. The defaults it had didn't work and no-one had ever tried to display something that low-res.

Big-ass TV is not an appropriate display device but probably can work with some adjustment.

Steve

johnpoz

@stephenw10 said in Screen resolution - why do I need to ask for this here?:

Big-ass TV is not an appropriate display device but probably can work with some adjustment.

Exactly... But he left anyway.. Laughing at suggestion of serial/console..

Understanding your firewall/router is not a freaking xbox is step 1 in setting it up ;)

AndyRH

At home you use what you have, my Pi3 PiHole and ZoneMinder servers both use my 4k TV for when I need to see the console. Took tweaking to get the text large enough to read.
Part of the fun is making the weird work...

johnpoz

@andyrh said in Screen resolution - why do I need to ask for this here?:

Part of the fun is making the weird work...

While there is something to be said about creative jury rigging to accomplish a task that has limited window to get done. I wouldn't personally call that fun ;) I am in the proper tool for the task camp ;)

You don't need a TV to see the console of a pi, just enable ssh when you install the image to your sd card, and you can ssh to it.. I have had multiple pi's, going back to the first one and including the Zero (without networking - just bought the cheap usb nic for it to get it on the network) - never once connected a monitor of any of them.. ;)

Would never in a million years attempt to use my TV as a monitor to work on something like a pi or server or my router.. How do you have such device without an actual monitor to use - even if its your normal PC or laptop, etc. And if I didn't I would just order a cheap monitor to use, and it would be here tmrw and could do whatever I was going to do then ;)

I just threw out 2 old 4:3 shit monitors to be honest - they are pain to get rid of.. Freaking computer stores want like $30 each to dispose of them.. Had to wait til the city runs its electronic recycling program to get rid of them ;)

AndyRH

SSH is great and how I manage the devices, but when the fan is used as a fertilizer spreader SSH does not work.
At work we have a proper KVM for the few physical machines left, at times nothing beats seeing what is coming out the VGA port.
Plus a little Velcro and a POE 2 USB adapter and the Pi disappears.

Avandel 0

Hi gents,

Read your posts, and maybe I came a bit too strong about this, but you simply must admit that when any os has a display attached, and it can show output, that it should do so properly.
In my many attempts I even changed the pc whit a different os, Openwrt and opnsense. The first started on that same big ass tv with very small characters, then you know what os this is.... and since I could not see any installing, I thought that I had picked the wrong package. So I rebooted the usb stick, forgetting to choose the bootorder, but I can reset any time (I was distracted here by RL matters). When I went back to the matter at hand, It showed Pfsense boot up on the screen, and what showed? It was correct displaying it. So I thought, "Ok, lets get going then..." and after a while I had to reboot again, and what happened? the characters were way off again.

This is actually what I wanted to let you know, it is not a smear in your face but just a fact that this software generally shows output, but it doesn't care, but this is my opinion and what I think happens...

Coming on strong about the OS, ok, that is not all miscalculated, Freebsd is partial Unix, but so is Linux, and so is Netware, so, me bugging about this Linux thing is just ventilating my frustration on these things, not personal, you have to see and live what I went through to get so far, and if not having all the knowledge, things can get in your hair very fast. So, I apologize for my behavior.
Sorry pfSense.

Avandel 0

@johnpoz Sorry man, but I did not laugh, I just tried this and thought that this would work. Knowing what I had to do to get a console working, I had to invest much more to get things working, and for what? just a bit of testing?
That is all this was, finding out a way to make vlans so that IOT devices can not touch the rest of the network, thatsall....
Oh and by the way, I was closer to crying......

Avandel 0

@johnpoz said in Screen resolution - why do I need to ask for this here?:

@andyrh said in Screen resolution - why do I need to ask for this here?:

Part of the fun is making the weird work...

While there is something to be said about creative jury rigging to accomplish a task that has limited window to get done. I wouldn't personally call that fun ;) I am in the proper tool for the task camp ;)

You don't need a TV to see the console of a pi, just enable ssh when you install the image to your sd card, and you can ssh to it.. I have had multiple pi's, going back to the first one and including the Zero (without networking - just bought the cheap usb nic for it to get it on the network) - never once connected a monitor of any of them.. ;)

Would never in a million years attempt to use my TV as a monitor to work on something like a pi or server or my router.. How do you have such device without an actual monitor to use - even if its your normal PC or laptop, etc. And if I didn't I would just order a cheap monitor to use, and it would be here tmrw and could do whatever I was going to do then ;)

I just threw out 2 old 4:3 shit monitors to be honest - they are pain to get rid of.. Freaking computer stores want like $30 each to dispose of them.. Had to wait til the city runs its electronic recycling program to get rid of them ;)

I am puzzled, how can you, and I am serious, when installing software to a Pi, how do you know when to enable ssh? do you have a disability device like blind people do to read the screen? can you read braille?
I sure don't have that, I must be able to see where this is going when installing.... So either you know something we don't (and do please tell) or you just guess from endlessly installing them, knowing exactly when to put what in where.... And that I find truly magnificent, making no mistakes there....

Avandel 0

This remark I made about serial.... find me a pc that has one on board (excluding the USB)
Oh, I can buy one, but the world is a bit turned over. Please follow me here:
Serial 9 pins are male.
Serial 25 pins are male.
Parallel 25 pins are female.
Convert serial to USB are.... male
Then I need a cable, long enough, from female to female.... adding to the signal loss and problems that may arise from such construct.
In network land, it is better to use one cable from A to B than several connectors in between.
This solution is waiting for problems..... and keep searching......

just a bit of info that I bring up here...

johnpoz

You are not understanding what is meant by console... Not talking about old school 9 pin connection.. Did you read the thread I linked too?

Simple usb console cable is what is used these days... Not sue what your going on about several inbetween? Put the box your setting up as your router next to your PC.. Once you have it setup its gui admin, or ssh.. And now you can put it where you want it for normal use - right next your 55 inch TV I take it ;)

stephenw10

If you are installing on a generic PC with some extra NICs in it though you're unlikely to have a serial console available. You definitely won't have a USB console.

I would always use a VGA connection over HDMI if that's available.

For almost all graphics hardware FreeBSD/pfSense does not use any specific driver. It uses the generic console mode. It's up to the BIOS and graphics hardware to pass that to the display and up to the display to show it correctly.
pfSense doesn't include anything additionally for graphics because most of the time it's expected to operate headless and the generic console output is sufficient to install and occasionally troubleshoot.

I imagine your TV is capable of displaying it but it may well need some settings adjusting. The one I used did. I just hit auto-scale IIRC when I did it.

Steve

Avandel 0

@johnpoz said in Screen resolution - why do I need to ask for this here?:

You are not understanding what is meant by console... Not talking about old school 9 pin connection.. Did you read the thread I linked too?

Simple usb console cable is what is used these days... Not sue what your going on about several inbetween? Put the box your setting up as your router next to your PC.. Once you have it setup its gui admin, or ssh.. And now you can put it where you want it for normal use - right next your 55 inch TV I take it ;)

Is this cable (https://www.amazon.com/Console-Essential-Accesory-Ubiquity-Switches/dp/B01AFNBC3K) ????
I am old school, and I mean I had no cable that had usb on one end and rj45 on other... The ones I used back then was ... you guessed it right: seriel 9 pins.
That made me shiver. But as I understand you right, and yes, I did read the link you provided, there is now a cable (above link) that I can put in my laptop's usb and the rj45 can go into one of the network ports?
Is that correct?