can merge speed of 2 wan or more.

jenskiebee

its possible can merge speed of 2 isp with a speed of:

50mbps
100mbps
with total of 150mbps it possible?

because my multi wan speedtest is total of 90mbps
isp:
1st. 50mbps
2nd. 100mbps

1st isp is static public ip
2nd isp is dhcp.

KOM

@jenskiebee I don't think so. The docs have a specific caveat:

Some firewall features which support gateway groups only support failover, not load balancing. For example, when using a gateway group for the default gateway or as a VPN endpoint, each gateway must be on a separate tier.

Gateway Groups

Docs indicate that for a gateway group that's the default gateway, each gateway must be on a different tier so you only get failover. For load-balancing they must be on the same tier.

marvosa

The short answer is no... PFsense can't bond the two circuits together to give you 150 Mbps from a single stream.

What PFsense can do... is provide 150 Mbps of aggregate bandwidth out of multiple streams using load balancing.

I have seen appliances out there that will attempt to do what you're asking but to my knowledge... PFsense does not have that functionality.

jenskiebee

@kom yeah its ok,, I realized or just in my mind if there is a way for that.

noplan

@jenskiebee

Bonding can be realized in combination with pfS as today only by a" bonding box"
In front of pfS.... Oh boy I can tell you... A f@#&* pain in the ass
Sometimes its working sometimes not the speed u get a total other ballgame
And a 100+50 is not Givin you 150 its more about a 125 or less
I got 2x100 and the best shot was 160...

So now we use loadbalance and everyone is happy except the inner nerd ;)