upgrade fails

sixmini

good morning, i have a sg 1100 firewall. after the upgrade it fails to load kernels.

Loading kernel...
Failed to load kernel 'kernel'
can't load 'kernel'

i wanted to reinstall os but i get this error.

Marvell>> run recovery
starting USB...
USB0: Register 2000104 NbrPorts 2
Starting the controller
USB XHCI 1.00
USB1: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 1 for devices... EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Bad device usb 0
Bad device usb 0

Starting EFI application at 05000000 ...

Card did not respond to voltage select!
mmc_init: -95, time 41
Scanning disk sdhci@d8000.blk...
Found 4 disks

Rico

Try run usbrecovery

-Rico

stephenw10

Yup the command is usbrecovery on the SG-1100:
See: https://docs.netgate.com/pfsense/en/latest/solutions/sg-1100/reinstall-pfsense.html#reinstalling-pfsense-plus-software

sixmini

@rico said in upgrade fails:

run usbrecovery

perfect i resolve the problem. tks