[opt2] IFACE: Adding IPv4 address to pppoe0 failed
-
Hey guys,
I am using a PPPOE connection and when the connection drops, or manually reoaded, it wont come back up unless I reboot.
In the interface status i see that the connection us up but with no IP address.ADSL2 Interface (opt2, pppoe0) Status up PPPoE up (Disconnect) Uptime 00:10:34 MAC Address 00:00:00:00:00:00 Gateway IPv4 xxx.xxx.xx.x IPv6 Link Local fe80::xx:xx:xx:xx:xx MTU 1492 In/out packets 6/0 (504 B/0 B) In/out packets (pass) 6/0 (504 B/0 B) In/out packets (block) 399/51 (30 KiB/4 KiB) In/out errors 0/0 Collisions 0
Looking at the logs, I see that the fw is seeing the public ip that it receives as a duplicate.
Here are the logs:
May 19 18:44:51 ppp [opt2] IFACE: Rename interface ng0 to pppoe0 May 19 18:44:51 ppp [opt2] IFACE: Up event May 19 18:44:51 ppp [opt2] IFACE: Adding IPv4 address to pppoe0 failed(IGNORING for now. This should be only for PPPoE friendly!): Address already in use May 19 18:44:51 ppp [opt2] xxx.xx.xx.xxx -> xxx.xx.xx.x May 19 18:44:51 ppp [opt2] IPCP: LayerUp May 19 18:44:51 ppp [opt2] IPCP: state change Ack-Rcvd --> Opened May 19 18:44:51 ppp [opt2] IPADDR xxx.xxx.xx.x May 19 18:44:51 ppp [opt2] IPCP: SendConfigAck #96 May 19 18:44:51 ppp [opt2] xxx.xxx.xx.x is OK May 19 18:44:51 ppp [opt2] IPADDR xxx.xxx.xx.1 May 19 18:44:51 ppp [opt2] IPCP: rec'd Configure Request #96 (Ack-Rcvd) May 19 18:44:50 ppp [opt2] IPCP: state change Req-Sent --> Ack-Rcvd May 19 18:44:50 ppp [opt2] IPADDR xxx.xx.xx.xxx May 19 18:44:50 ppp [opt2] IPCP: rec'd Configure Ack #4 (Req-Sent) May 19 18:44:50 ppp [opt2] IPADDR xxx.xx.xx.xxx May 19 18:44:50 ppp [opt2] IPCP: SendConfigReq #4 May 19 18:44:50 ppp [opt2] IPCP: state change Ack-Rcvd --> Req-Sent May 19 18:44:48 ppp [opt2] IPCP: state change Req-Sent --> Ack-Rcvd May 19 18:44:48 ppp [opt2] IPADDR xxx.xx.xx.xxx May 19 18:44:48 ppp [opt2] IPCP: rec'd Configure Ack #3 (Req-Sent) May 19 18:44:48 ppp [opt2] IPADDR xxx.xx.xx.xxx May 19 18:44:48 ppp [opt2] IPCP: SendConfigReq #3 May 19 18:44:48 ppp [opt2] xxx.xx.xx.xxx is OK May 19 18:44:48 ppp [opt2] IPADDR xxx.xx.xx.xxx May 19 18:44:48 ppp [opt2] IPCP: rec'd Configure Nak #2 (Req-Sent) May 19 18:44:48 ppp [opt2] IPV6CP: LayerFinish May 19 18:44:48 ppp [opt2] IPV6CP: state change Req-Sent --> Stopped May 19 18:44:48 ppp [opt2] IPV6CP: protocol was rejected by peer May 19 18:44:48 ppp [opt2_link0] LCP: protocol IPV6CP was rejected May 19 18:44:48 ppp [opt2_link0] LCP: rec'd Protocol Reject #126 (Opened)
Any idea how to fix this?
Thanks !!
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.