PPoE gateway in different subnet



  • I have a draytek 130 which forwards the configuration, so this is what I get as configuration by DHCP:
    Status
    up
    DHCP
    up Release
    MAC Address
    00:90:0b:3f:96:5b
    IPv4 Address
    46.44.164.217
    Subnet mask IPv4
    255.255.255.255
    Gateway IPv4
    212.121.121.219
    IPv6 Link Local
    fe80::290:bff:fe3f:965b%em1
    MTU
    1500
    Media
    1000baseT <full-duplex>In/out packets
    7614332/9264229 (1.31 GiB/455.50 MiB)
    In/out packets (pass)
    7614332/9264229 (1.31 GiB/455.50 MiB)
    In/out packets (block)
    140127/0 (15.73 MiB/0 B)
    In/out errors
    0/0
    Collisions
    0

    The gateway is in a different subnet, as is usual for PPoE, but it seems that pFsense is unable to handle this.

    Previously I did manage to get this working by entering everything as above and setting 1 as the CIDR subnet mask, but now i'm unable to do so.

    how could I solve this issue?</full-duplex>



  • After updating my draytek 130 to firmware 3.7.9 the issue was solved and PPoE pass-through was possible.


Log in to reply