Need help forward Plex and ownCloud hosted in a Freenas server

[joseph_lin]

I have been working on this for "days" and I still cannot get it to work :( I need sets of fresh eyes to help me trouble shoot the problems. Here's my settings.

Appreciate your help.

[Derelict]

Doesn't look like you let pfSense create your firewall rules from your NAT rules. The port forward for 443 is TCP/UDP while the firewall rule is TCP-only. That should be fine for HTTPS unless owncloud needs UDP/443 for some reason.

Same for 32400 on Plex. No idea if Plex needs TCP/UDP or just TCP.

You sure about the freenas jail IP addresses of 192.168.0.3 and 192.168.0.4?

https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting

[joseph_lin]

On my old router I used TCP for HTTPS. The TCP/UDP is just the left over of my trial and error. I never experience any difficulties in other routers. pfSense is the one that gives me trouble. Yes, the jail IP for Plex is 192.168.0.4 and ownCloud is 192.168.0.3.

[Derelict]

https://doc.pfsense.org/index.php/Port_Forward_Troubleshooting

[joseph_lin]

Read it and tried for three days. Not helping…
Any other suggestions?

[Derelict]

That list covers just about everything it could be.

You'll probably have to start looking at packet captures to see where you went wrong.