Confusing language when restoring configuration
-
When restoring a configuration to new hardware, you might get an "Interface mismatch detected" error, like so:
You're instructed to click 'Apply Changes'. There is no 'Apply Changes' button. So you click the 'Save' button instead.
Then you get this screen:
"Please apply the settings in order to reboot?" There's no 'Apply Settings' button. Clicking 'Save' just gives you the same screen. So are your interface assignments saved/applied? Should you pick 'Reboot' from the Diagnostics menu?
It's not hard to figure out, but this really oughta get cleaned up a little. ;)
-
That was fixed by PR https://github.com/pfsense/pfsense/pull/2996
which became commit https://github.com/pfsense/pfsense/commit/21c18c3df11547aba172c10f95872dbd8682f7d9I guess there has not been a release yet with that fix in it.
-
It's fixed in 2.3.1_5 and newer.
-
Ah, I see, thanks. I must've been on a slightly earlier build.