IPsec connection established, no traffic

[xzaz]

Hi all,

We have a iPsec connection, the connection is established but there is no traffic. I can't ping the hosts on the other side.

I have the Allow all traffic rule on the firewall for the Ipsec.

How can i debug this further to give you more information?

Thanks in advanced.

[cmb]

That shows nothing is matching your P2 to go across the tunnel.

[xzaz]

So our subnet on the otherside 192.168.1.0 was already in use by another VPN. We changed it to 10.170.24.0/24. This is a unknown local subnet. How can I add a route so that all the traffic from the local subnet (10.170.24.0) goes to 192.168.1.0. I don't want to change the whole local network.

[xzaz]

Ok, with the help of some experts we got it working. If you ipsec gives you a local network that is not your local network create a virtual ip that is that subnet. Then add a secondary ip in that network on your local computer. Add a static route on the computer. And it's up.  ;D