-
@trentk10 said in NUT package:
Mar 8 21:53:35 pfSense kernel: pid 8842 (usbhid-ups), jid 0, uid 0: exited on signal 10
Unfortunately, this is being hit by a lot of people with NUT 8.0. See this post for information.
-
D dennypage referenced this topic on
-
@dennypage I seem to have a similar but possibly different problem.
My UPS is an Eaton Eclipse ECO 650 connected by USB to my Netgate-3100 running 23.01-RELEASE (arm) with NUT 2.8.0_2.
Note: the setup worked perfectly before my update to 23.01 and 2.8.0 for over 6 months, there have been no powercuts/surges or hardware changes.
As with others I am seeing repeated log entries from upsmon.
Mar 12 09:57:09 upsmon 80760 Poll UPS [EatonUPS] failed - Driver not connected Mar 12 09:57:04 upsmon 80760 Poll UPS [EatonUPS] failed - Driver not connectedIf I filter my logs to upshid-ups I only see the following:
Mar 9 22:26:16 usbhid-ups 91631 Startup successful Mar 9 22:26:09 usbhid-ups 70838 Signal 15: exiting Mar 9 22:20:46 usbhid-ups 70838 Startup successful Mar 9 22:20:41 usbhid-ups 47718 Signal 15: exiting Mar 9 22:13:14 usbhid-ups 47718 Startup successful Mar 9 22:10:05 usbhid-ups 75991 Signal 15: exiting Mar 9 21:57:06 usbhid-ups 75991 Startup successfulIf I filter the logs to upsd I see:
Mar 12 09:07:25 upsd 82791 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): Connection refused Mar 12 09:02:25 upsd 82791 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): Connection refused Mar 12 08:57:25 upsd 82791 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): Connection refused Mar 12 08:52:25 upsd 82791 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): Connection refused Mar 9 22:26:16 upsd 82791 Connected to UPS [EatonUPS]: usbhid-ups-EatonUPS Mar 9 22:26:14 upsd 82791 User local-monitor@::1 logged into UPS [EatonUPS] Mar 9 22:26:10 upsd 82791 Startup successful Mar 9 22:26:10 upsd 82791 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): No such file or directory Mar 9 22:26:10 upsd 82791 not listening on 127.0.0.1 port 3493 Mar 9 22:26:10 upsd 82791 listening on ::1 port 3493 Mar 9 22:26:10 upsd 82791 listening on 127.0.0.1 port 3493 Mar 9 22:26:10 upsd 82791 not listening on 192.168.200.254 port 3493 Mar 9 22:26:10 upsd 82791 listening on pfsense.{internaldomainname} port 3493 Mar 9 22:26:09 upsd 62680 Signal 15: exiting Mar 9 22:26:09 upsd 62680 mainloop: Interrupted system call Mar 9 22:26:09 upsd 62680 User local-monitor@::1 logged out from UPS [EatonUPS]This morning the failure occurred at 08:52 (from notification email):
8:52:27 UPS Notification from pfSense.irwazu.co.uk - Sun, 12 Mar 2023 08:52:27 +0000 Communications with UPS EatonUPS lostMy configuration is extra arguments to driver:
pollfreq=90Additional configuration lines for upsmon.conf
RUN_AS_USER rootAdditional configuration lines for ups.conf
user=root pollinterval=15Other than using the "interruptonly" option is there anything I can do to resolve or help debug the cause? Is this likely the same issue as for CyberPower UPSs you've already identified?
Full logs of a restart of the UPS service are as follows:
Mar 12 10:05:19 upsmon 69168 Communications with UPS EatonUPS established Mar 12 10:05:16 upsd 70834 Connected to UPS [EatonUPS]: usbhid-ups-EatonUPS Mar 12 10:05:15 usbhid-ups 80232 Startup successful Mar 12 10:05:14 upsmon 69168 UPS EatonUPS is unavailable Mar 12 10:05:14 upsmon 69168 Poll UPS [EatonUPS] failed - Driver not connected Mar 12 10:05:14 upsd 70834 User local-monitor@::1 logged into UPS [EatonUPS] Mar 12 10:05:10 upsd 70834 Startup successful Mar 12 10:05:10 upsd 70834 Can't connect to UPS [EatonUPS] (usbhid-ups-EatonUPS): Connection refused Mar 12 10:05:10 upsd 70834 not listening on 127.0.0.1 port 3493 Mar 12 10:05:10 upsd 70834 listening on ::1 port 3493 Mar 12 10:05:10 upsd 70834 listening on 127.0.0.1 port 3493 Mar 12 10:05:10 upsd 70834 not listening on 192.168.200.254 port 3493 Mar 12 10:05:10 upsd 70834 listening on pfsense.irwazu.co.uk port 3493 Mar 12 10:05:09 upsmon 69168 Communications with UPS EatonUPS lost Mar 12 10:05:09 upsmon 69168 UPS [EatonUPS]: connect failed: Connection failure: Connection refused Mar 12 10:05:09 upsmon 69168 Startup successful Mar 12 10:05:08 upsd 82791 Signal 15: exiting Mar 12 10:05:08 upsd 82791 mainloop: Interrupted system call Mar 12 10:05:08 upsd 82791 User local-monitor@::1 logged out from UPS [EatonUPS] Mar 12 10:05:08 upsmon 80760 Signal 15: exiting Mar 12 10:05:07 upsmon 80760 Poll UPS [EatonUPS] failed - Driver not connected -
@davidir Your log messages do not show anything particularly unusual. Signal 15 indicates that the usbhid-ups process was terminated via a kill signal. This is usually triggered by a package restart such was when your DHCP WAN address changes.
Btw, not sure what you are intending to do with the poll interval settings. Given that you are using a usb connection, there is a good reason to be setting these, particularly pollinterval in ups.conf which may negatively affect your shutdown. Unless you have a very concrete problem that you are fixing, I would recommend that you remove both of them. As well as the RUN_AS_USER setting in upsmon.conf.
-
I've received several requests for the dev build of usbhid-ups, so I thought I would upload the file here.
For reference, the shasum and sha256sum checksums of the unzipped file are:
49ce9131502bfb8b789ee97b7fb3fc81fc9f8fff usbhid-ups 999a2653559dbc50ecc8ba592a67587b1e307a1495f6e8ebbd3d8e90e3967133 usbhid-upsIf you use the file, please post and let me know if it resolves an issue for you.
-
@dennypage thank you very much for this. I loaded it up today and so far, it has continued to run for about 5 hours. I'll report back tomorrow to let you know if it hangs up overnight.
For other folks' information, I put the file Denny shared into /usr/local/libexec/nut replacing the file already there. (Be sure to make a copy of the original in case this doesn't work for you.) Make sure that the permissions are set to rwxr-xr-x (0755). Also I had to include "user=root" in the ups.conf section in pfSense.
Thanks again Denny.
-
-
Update - No issues overnight still running fine and serving my network as a NUT Server. Updated to the latest 2.7.0 Devel build this morning and UPS service started up without a hiccup. Very pleased.
FYI, I have a CyberPower CP1500PFCLCD and it is connected to my pfSense box via the supplied USB cable.
-
@dennypage said in NUT package:
I've received several requests for the dev build of usbhid-ups, so I thought I would upload the file here.
For reference, the shasum and sha256sum checksums of the unzipped file are:
49ce9131502bfb8b789ee97b7fb3fc81fc9f8fff usbhid-ups 999a2653559dbc50ecc8ba592a67587b1e307a1495f6e8ebbd3d8e90e3967133 usbhid-upsIf you use the file, please post and let me know if it resolves an issue for you.
So far so good for me with a Trip Lite SMART1500LCD! It's only been an hour, but it has stayed connected and my logs are no longer getting spammed by disconnects/connects.
-
V viragomann referenced this topic on
-
V viragomann referenced this topic on
-
@offstageroller said in NUT package:
@dennypage said in NUT package:
I've received several requests for the dev build of usbhid-ups, so I thought I would upload the file here.
For reference, the shasum and sha256sum checksums of the unzipped file are:
49ce9131502bfb8b789ee97b7fb3fc81fc9f8fff usbhid-ups 999a2653559dbc50ecc8ba592a67587b1e307a1495f6e8ebbd3d8e90e3967133 usbhid-upsIf you use the file, please post and let me know if it resolves an issue for you.
So far so good for me with a Trip Lite SMART1500LCD! It's only been an hour, but it has stayed connected and my logs are no longer getting spammed by disconnects/connects.
I'm at about 8 hours now, with no issues to report. All is well again with my USB connection to my UPS!
-
Hey guys. Mind if I join the party?
I upgraded from from 2.6 CE to 23.01 plus today, to get support for the 2.5Gbps nics in my firewall.
Unfortunately after the upgrade, NUT started failing because it couldn't claim the USB device:
Can't claim USB device [051d:0003]@0/0: Other errorUPS is a APC Smart-UPS 1500.
Did a little searching, found it was a permission error, and eventually found this thread.
Looks like I found the right place.
I've gone back through this thread about a month and started reading.
Adding
user=rootto ups.conf got things going again. However, I'd call that a workaround. If I read right, looks like I need to wait for the next release of NUT for a real fix.At the moment I am not using @dennypage's custom usbhid-ups. If my UPS does not stay online, I'll apply it and post results.
I'll be keeping an eye on this thread for new information.
-
@knight-of-ni said in NUT package:
Adding user=root to ups.conf got things going again. However, I'd call that a workaround. If I read right, looks like I need to wait for the next release of NUT for a real fix.
While the next release of nut is expected to address the CyberPower issue, it will not address the APC issue. The APC issue is a usb quirk issue, and this requires a new version of the kernel in pfSense to permanently resolve. I don't expect that to happen soon.
See here for further details of the APC issue. I recommend using the /boot/loader.conf.local solution if you can take a reboot.
-
D dennypage referenced this topic on
-
@dennypage said in NUT package:
If you use the file, please post and let me know if it resolves an issue for you.
Your version of
usbhid-upshas been working fine with my CyberPower for 48 hours now. Thanks. -
@dennypage said in NUT package:
If you use the file, please post and let me know if it resolves an issue for you.
I was experiencing the same issue and using this version of
usbhid-upshas resolved the issue. Many thanks, that was driving me NUTS (pun intended) -
@dennypage Quick question: is the NUT package somehow dependent on other services or is integrated into a service hook since 23.01? After upgrading I have NUT alert messages all over the place for things that are completely unrealted to the UPS.
E.g. resetting or reconfiguring a gateway, doing configurations on WAN or VPNs if the interface is assigned etc. all seem to trigger "problems" with NUT loosing and regaining connection to the UPS. UPS attached is an APC BackUPS via USB that ran well before without being trigger happy with notifications when interface/gateway/routing things are happening. Now just touching some of those things seem to trigger a connection loss from NUT. Really confusing
Cheers
\jens -
@jegr said in NUT package:
E.g. resetting or reconfiguring a gateway, doing configurations on WAN or VPNs if the interface is assigned etc. all seem to trigger "problems" with NUT loosing and regaining connection to the UPS.
pfSense restarts package services when WAN interfaces disconnect or reconnect. Yes, this is unnecessary for some services, such as NUT with a USB connection, but there is no way for pfSense to know which services actually need to be restarted. It's always been this way.
What you would expect to see is NUT restart once when the interface goes down, and once again when the interface comes back up. Whether or not you see NUT reporting a lost connection or not depends upon the order and speed of shutting down the various processes involved (usbhid-ups, upsd, upsmon).
-
@dennypage said in NUT package:
pfSense restarts package services when WAN interfaces disconnect or reconnect. Yes, this is unnecessary for some services, such as NUT with a USB connection, but there is no way for pfSense to know which services actually need to be restarted. It's always been this way.
That may very well be, but before 23.01 there were no problems with NUT overactively reporting down/ups at those times whereas now they pop up almost every time when someone is editing something on interfaces, routing gateways etc.
Just wanting to check if there's anything that has changed while converting stuff to PHP 8.1 or anything. Wouldn't be the first :) -
@jegr Nothing to do with PHP, it's actually a shell script.
If you go back through this thread you'll find mention of this issue five or more years ago. Some people see it a lot, some never see it. It just depends on how things happen on the box. If it is really bothering you, you could do a local patch for the rc script to add a sleep following the kill of upsmon. But only if it's really bothering you.
-
@dennypage Nah, I can live with that :) But that only adds to another thing that packages should have more specific hooks like the XY interface instead of "any" interface, as theres no need otherwise. Or OpenVPN that gets restarted pretty often while listening on localhost so would be completely unphased by any changes. Also it'd be nice to have those notifications selectable and expandable so we can get more/specific notifications and disable others :)
But I'll push that in another thread. Thanks for getting back :)
Cheers
\jens -
@dennypage said in NUT package:
I've received several requests for the dev build of usbhid-ups, so I thought I would upload the file here.
For reference, the shasum and sha256sum checksums of the unzipped file are:
49ce9131502bfb8b789ee97b7fb3fc81fc9f8fff usbhid-ups 999a2653559dbc50ecc8ba592a67587b1e307a1495f6e8ebbd3d8e90e3967133 usbhid-upsIf you use the file, please post and let me know if it resolves an issue for you.
I finally got round to loading this file onto my system, and unfortunately it does not seem to work at all. Now instead of failing randomly after a period of time I get the failure immediately after restarting the UPS service.
Mar 30 18:25:59 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:54 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:49 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:44 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:39 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:38 php-cgi 35430 notify_monitor.php: Message sent to my@email.net OK Mar 30 18:25:34 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:29 upsmon 34059 UPS EatonUPS is unavailable Mar 30 18:25:29 upsmon 34059 Poll UPS [EatonUPS] failed - Driver not connected Mar 30 18:25:29 upsd 35561 User local-monitor@::1 logged into UPS [EatonUPS] Mar 30 18:25:27 php-cgi 35430 notify_monitor.php: Message sent to my@email.net OK Mar 30 18:25:25 upsd 35561 Startup successfulI think this log sequence shows from startup.
Any further suggestions for a solution to this? Are there any diagnostics I can do to be helpful?
Thank you.
David -
@davidir did you check to be sure the file permissions are correct after uploading it? This file from Denny Page is working without a hitch for me with a CyberPower UPS. I don't know if there are any other quirks with an Eaton UPS.
