-
@Nuggets-0 The old version wanted to be "uucp" and the new version wants to be "nut", so now there is a disagreement between the NUT executable and the pfSense NUT package.
-
Hello, I recently re-activated the SMTP notifications after 1 year of using only telegram (because of https://redmine.pfsense.org/issues/14031), but I no longer receive NUT notifications on email, only telegram.
On nut settings, the Enable notifications is checked.
I'm running 2.8.0_2.Am I missing something?
-
@Samlink Unfortunately, the fix for the Redmine issue you referred to broke the smtp notification mechanism for non root processes. I am hoping this gets fixed in the next release set.
In the interim, you should be able to work around the issue by adding
RUN_AS_USER rootin the "Additional configuration lines for upsmon.conf" section.
-
So here's another data point:
Finally got around to buying a new UPS for my pfsense box (A 4 core i5-6500 Dell Optiplex)
pfsense 23.05.1-RELEASE and nut 2.8.0_2
CyberPower CST135UC2 $120 from Costco - I really should have known better, but I'd used CPS UPS' with pfsense NUT before with no issues. Sigh.After much futzing and the dreaded CPS disconnect yo-yo and much searching I finally found this thread.
So I now have a stable UPS, yay.
All it took was adding the "user=root" to ups.conf
AND
"interruptonly" to driver arguments.I see far fewer parameters, but I can live with the workarounds. For grins and giggles they are:
Variable Value battery.charge 100 battery.runtime 16525 battery.runtime.low 300 device.mfr CPS device.model CST135UC2 device.serial CDZNP7001732 device.type ups driver.flag.interruptonly enabled driver.name usbhid-ups driver.parameter.pollfreq 30 driver.parameter.pollinterval 2 driver.parameter.port auto driver.parameter.synchronous auto driver.version 2.8.0 driver.version.data CyberPower HID 0.6 driver.version.internal 0.47 driver.version.usb libusb-1.0.0 (API: 0x1000102) ups.beeper.status disabled ups.mfr CPS ups.model CST135UC2 ups.productid 0601 ups.serial CDZNP7001732 ups.status OL ups.vendorid 0764and here's the "usbconfig -v -d ugen0.5 show_ifdrv" output:
ugen0.5: <CPS CST135UC2> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x0764 idProduct = 0x0601 bcdDevice = 0x0200 iManufacturer = 0x0003 <retrieving string failed> iProduct = 0x0001 <CST135UC2> iSerialNumber = 0x0002 <CDZNP7001732> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0029 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00c0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x11 RAW dump: 0x00 | 0x09, 0x21, 0x11, 0x01, 0x21, 0x01, 0x22, 0xd6, 0x08 | 0x02 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x0020 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x0020 bRefresh = 0x0000 bSynchAddress = 0x0000The really weird part is the id wasn't recognized on some of the ports, which considering they're all ugen0 was a little freaky.
So that's what I get for being lazy and cheap. Sigh again.
Now I just have to remember to remove everything when the nut package eventually gets updated.
Thank you for all the hard work here, and I volunteer as guinea pig for testing patched code if needed. Since the Optiplex is Intel i5, 4 cores, 8GB of RAM and about half a TB of SSD free it's not exactly a constrained test platform. Happy to set up a user for ssh or VPN remote access during test periods My home fiber is 1G/1G uncapped so slinging large files around isn't much of an issue either.
-
@daplumber I would just like to add, that while there are “bad” UPS’s out there, I think the BSD crowd should take a long breath and have a look in its own backyard. I have suffered the disconnect issues on two different pfSenses (x64 and Arm) with two different UPS’s (Eaton and CyperPower), and the only stable solution was to connect the UPSes to my Windows Server or my Linux Raspberry Pi. None of those platforms suffered the disconnect issue and both UPS’s were perfectly stable there.
So I would still argue your issue is just as likely with the USB implementation in BSD. -
@keyser The disconnect issue with CyberPower UPSs is fairly well known. It happens on Linux and Windows as well. Usually it is not a real issue because the reconnect logic covers it. The issue which exposes it here is that we are using the 2.8.0 release of NUT, which has some significant USB library issues. Almost all other distributions have abandoned 2.8.0 and moved to the dev version.
I've been patiently waiting for 2.8.1, but it keeps getting pushed out so I've started working on moving to dev. I remain utterly convinced that 2.8.1 will be released the day after I complete the move to dev.
-
@dennypage said in NUT package:
I've been patiently waiting for 2.8.1, but it keeps getting pushed out so I've started working on moving to dev. I remain utterly convinced that 2.8.1 will be released the day after I complete the move to dev.
Hah, a fellow believer in Saint Murphy the patron saint of software development! (Amongst many other things.)
Of course if you DON’T move to dev, nut 2.8.1 will never see the light of day. Sigh.
Oh, and USB is a crazy collection of not-particularly-well-defined-standards where weird… stuff happens on a regular basis. It’s the worst possible interface… except for all the others. Shrug.
-
Hi folks
hope you're doing well
I got big issues with nut on multiple sites.
see : https://redmine.pfsense.org/issues/14795
Correct me if i'm wrong i need to use the devel package instead of the 2.8.0 port right ?
I need a little hint on how i can install the devel package which presumably correct the problem.
i tried make the package :
git clone https://github.com/pfsense/FreeBSD-ports.git cd sysutils/nut-devel/ make packagei got :
make: "/usr/share/mk/bsd.port.mk" line 32: Cannot open /usr/ports/Mk/bsd.port.mk make: "/root/nut-devel/Makefile" line 149: Malformed conditional (${PORT_OPTIONS:MUSB}) make: "/root/nut-devel/Makefile" line 156: Malformed conditional (${PORT_OPTIONS:MBASH}) make: "/root/nut-devel/Makefile" line 160: Malformed conditional (${PORT_OPTIONS:MDOCS}) make: "/usr/share/mk/bsd.port.mk" line 32: Cannot open /usr/ports/Mk/bsd.port.mk make: Fatal errors encountered -- cannot continue make: stopped in /root/nut-develso i tried with gmake :
gmake packagei got this :
Makefile:137: *** missing separator. Stop.Can someone give me some hint here ?
Thank you ;)
-
@abs0new farther back in this thread you will find dev build executables that have been shared.
-
Hi!
I came across this problem and I can't seem to find the answer in the thread.
I have a PFsense 6100 MAX , its on 23.05.1-Release at the moment.Installed NUT services and connected my Lenovo UPS (55942KX) via USB to the firewall.
I am using an SRS232 to USB cable.The summary says its failed to retrieve status.
Logs:
Oct 11 12:04:43 upsmon 54986 Poll UPS [Lenovo_UPS] failed - Driver not connected
Oct 11 12:04:45 upsd 56388 Can't connect to UPS [Lenovo_UPS] (usbhid-ups-Lenovo_UPS): No such file or directory
Oct 11 12:04:53 upsmon 54986 Poll UPS [Lenovo_UPS] failed - Driver not connected
Oct 11 12:04:58 upsmon 54986 Poll UPS [Lenovo_UPS] failed - Driver not connected
Oct 11 12:05:03 upsmon 54986 Poll UPS [Lenovo_UPS] failed - Driver not connected
Oct 11 12:05:08 upsmon 54986 Poll UPS [Lenovo_UPS] failed - Driver not connected
Oct 11 12:05:08 upsmon 54986 UPS Lenovo_UPS is unavailableI have tried with all of the drivers from the drop-down menu without success.
I am sure I am missing something from the configuration, but I am technically stuck at this point. Maybe I am just dumb to even try to use the USB option, but unfortunatly I don't have other solutions for this UPS.Can you guys show me a path where should I start poking around?
Kind regards,
Zee Muffin man, -
That should probably be using a serial driver, not USB. The serial port is connected via USB, but the UPS is connected via serial. I.e., the UPS isn't going to show up as a USB device for the USB driver to communicate with.
-
@zeemaffin said in NUT package:
Installed NUT services and connected my Lenovo UPS (55942KX) via USB to the firewall.
I am using an SRS232 to USB cable.Does the UPS have a direct USB interface? If so, you absolutely should use that interface instead of a USB to serial cable.
Now, assuming that it does not have a native USB interface and that you have no choice other than to use a USB serial emulator cable...
If the emulator chip in the cable is supported by FreeBSD, the device will show up as a serial port in /dev when you connect the USB cable to the pfSense system. If it doesn't, you're out of luck.
To use a serial port emulator, in the NUT configuration you would select "Local Serial" as the UPS Type, and then select the correct port in the Serial port drop-down list (Hint: on the 6100, it's not cuau0 or cuau1).
Now comes the hard part. You will have to select the correct driver, and it's a long list to choose from. Without knowing who actually made the UPS that Lenovo rebranded, you have to guess and test. My best guess would be mge-shut, but that is only a guess.
-
Did the USB Cyber Power connection drop issue ever get resolved? I noticed they closed that redline....
Make sure to upvote
-
@JonathanLee The new NUT version is still pending. I'm switching from nut (8.0) to nut-devel (pre 8.1), which unfortunately has required some fixes in the upstream BSD Port. The fixes are completed, but now have to flow down to pfSense. I don't know how long that will take.
-
@dennypage Thank you for your suggestion.
Do i need to search through 1212 posts to find the executable ?
-
When its ready, you see it here, signaled as "an update has arrived" :
There will be a yellow sign after the "i".
-
@dennypage Hi!
Thank you for the tips, I am going through the serial drivers.
In the UPS settings page the serial port is a drop down menu and /dev/cuau0 and /dev/cuau1 is the 2 option, theres nothing else.
SO this case can't understand your hint regarding the 6100.Sofar I had no luck... Would you suggest and USB-B to USB-A cable? ( the UPS has the usb port similiar to printers do)
Kind regards,
-
@zeemaffin said in NUT package:
In the UPS settings page the serial port is a drop down menu and /dev/cuau0 and /dev/cuau1 is the 2 option, theres nothing else.
SO this case can't understand your hint regarding the 6100.The 6100 has two hidden/unconnected serial ports on the motherboard. These will show up as cuau0 and cuau1. That there is not another option strongly implies that the serial emulator chip is not supported by FreeBSD.
Sofar I had no luck... Would you suggest and USB-B to USB-A cable? ( the UPS has the usb port similiar to printers do)
Absolutely. If the UPS has a native USB interface, it would always be preferred over a serial emulator cable.
-
@abs0new said in NUT package:
Do i need to search through 1212 posts to find the executable ?
LOL.
It's from earlier this year.
-
HI Denny!
News!
With the USB cable I see the UPS via the command usbconfig, however its not showing up in the graphical interface dropdown menu.
I mean the cuau 0-1 shows up only, but the usbus0 wont.Would you suggest a restart of the firewall, or is there another package I need to be able to use the usbbus for this purpose?
Sorry for the dummy questions.Kind Regards,
Maffin
