Netgate Discussion Forum
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Search
    • Register
    • Login

    NUT package (2.8.0 and below)

    UPS Tools
    128
    1.2k
    2.8m
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • dennypageD
      dennypage
      last edited by

      What version of the nut package are you currently running? If you are already running 2.7.4, then there should no issue with the update. If you are running a version prior to 2.7.4, then the settings will be converted from the old package to the new package, and may require attention. See the beginning of this thread for more information. If you are still unsure, post some information about your settings.

      The current version is 2.7.4_4

      1 Reply Last reply Reply Quote 0
      • E
        endy66
        last edited by

        @dennypage:

        What version of the nut package are you currently running? If you are already running 2.7.4, then there should no issue with the update. If you are running a version prior to 2.7.4, then the settings will be converted from the old package to the new package, and may require attention. See the beginning of this thread for more information. If you are still unsure, post some information about your settings.

        The current version is 2.7.4_4

        Thank you for the answer. I'm using the Version 2.7.4_3. Do i Need to save some Settings? I have set custom Parameters on the following fileds:

        • Extra Arguments to Driver (optional
        • Additional configuration lines for upsd.conf
        • Additional configuration lines for upsd.users

        Best Regards

        1 Reply Last reply Reply Quote 0
        • dennypageD
          dennypage
          last edited by

          @endy66:

          Thank you for the answer. I'm using the Version 2.7.4_3. Do i Need to save some Settings?

          In moving from 2.7.4_3 to 2.7.4_4 there is nothing special you need to do. The settings will all be maintained.

          1 Reply Last reply Reply Quote 0
          • E
            endy66
            last edited by

            @dennypage:

            @endy66:

            Thank you for the answer. I'm using the Version 2.7.4_3. Do i Need to save some Settings?

            In moving from 2.7.4_3 to 2.7.4_4 there is nothing special you need to do. The settings will all be maintained.

            Perfect, thank you!

            1 Reply Last reply Reply Quote 0
            • A
              athurdent
              last edited by

              Thanks for this nice package, works fine and look great!

              Forgive me for being slightly OT, but is it normal for a UPS to stay at 100% Charging? It's my first UPS ever and running like this for 2 days now (EATON 3S 550). Shouldn't it stop charging when it's at 100%?

              1 Reply Last reply Reply Quote 0
              • D
                doktornotor Banned
                last edited by

                That's Eaton special.

                1 Reply Last reply Reply Quote 0
                • A
                  athurdent
                  last edited by

                  @doktornotor:

                  That's Eaton special.

                  So this is normal with EATON and I don't have to get it exchanged?

                  1 Reply Last reply Reply Quote 0
                  • D
                    doktornotor Banned
                    last edited by

                    Yes, it happens with any Eaton I tried. Whether or not it's charging, NFC. The package only reports what's reported by firmware.

                    1 Reply Last reply Reply Quote 0
                    • A
                      athurdent
                      last edited by

                      Thanks, doc! :)

                      1 Reply Last reply Reply Quote 0
                      • P
                        poluket
                        last edited by

                        Hello,

                        sorry for my English :)

                        I think that I have the same problem than ecfx-xunil but I am a newbie.

                        PFsense version : 2.3.3 amd 64

                        NUT package version 2.7.4_4

                        I have an UPS FSP EP 2000

                        I use the nutdrv_qx driver. (without custom option)

                        it work fine but after a time, I have this message "Failed to retrieve status". I click on top to restart the service on the gui and i have again the value.

                        I have seen your message but I don't understand what to do to resolve the problem.

                        I need to chage the code?

                        Thank you  for your help.

                        1 Reply Last reply Reply Quote 0
                        • dennypageD
                          dennypage
                          last edited by

                          Have you checked the system log? In Status / System Logs / System / General, look for messages matching "ups" or "nut".

                          1 Reply Last reply Reply Quote 0
                          • P
                            poluket
                            last edited by

                            thank you for your help :)

                            the logs when I have the problem (newest entries on top):

                            Mar 7 13:48:30 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:25 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:25 	kernel 		ugen3.2: <inno tech="">at usbus3
Mar 7 13:48:22 	kernel 		ugen3.2: <inno tech="">at usbus3 (disconnected)
Mar 7 13:48:20 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:17 	upsd 	90750 	Can't connect to UPS [UPS-Local-USB] (nutdrv_qx-UPS-Local-USB): No such file or directory
Mar 7 13:48:15 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:14 	kernel 		ugen3.2: <inno tech="">at usbus3
Mar 7 13:48:11 	kernel 		ugen3.2: <inno tech="">at usbus3 (disconnected)
Mar 7 13:48:10 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:05 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:02 	kernel 		ugen3.2: <inno tech="">at usbus3
Mar 7 13:48:00 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:48:00 	kernel 		ugen3.2: <inno tech="">at usbus3 (disconnected)
Mar 7 13:47:55 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:47:51 	kernel 		ugen3.2: <inno tech="">at usbus3
Mar 7 13:47:50 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:47:48 	kernel 		ugen3.2: <inno tech="">at usbus3 (disconnected)
Mar 7 13:47:45 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:47:40 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:47:40 	kernel 		ugen3.2: <inno tech="">at usbus3
Mar 7 13:47:37 	kernel 		ugen3.2: <inno tech="">at usbus3 (disconnected)
Mar 7 13:47:35 	upsmon 	80446 	Communications with UPS UPS-Local-USB lost
Mar 7 13:47:35 	upsmon 	80446 	Poll UPS [UPS-Local-USB] failed - Driver not connected
Mar 7 13:47:33 	nutdrv_qx 	96269 	Permissions problem: Input/output error</inno></inno></inno></inno></inno></inno></inno></inno></inno></inno>

                            and after a service reboot:

                            Mar 7 14:00:49 	upsd 	41029 	User monuser@::1 logged into UPS [UPS-Local-USB]
Mar 7 14:00:49 	upsd 	41029 	Connected to UPS [UPS-Local-USB]: nutdrv_qx-UPS-Local-USB
Mar 7 14:00:48 	nutdrv_qx 	41173 	Startup successful
Mar 7 14:00:47 	upsd 	41029 	Startup successful
Mar 7 14:00:47 	upsd 	40900 	Can't connect to UPS [UPS-Local-USB] (nutdrv_qx-UPS-Local-USB): No such file or directory
Mar 7 14:00:47 	upsd 	40900 	listening on 127.0.0.1 port 3493
Mar 7 14:00:47 	upsd 	40900 	listening on ::1 port 3493
Mar 7 14:00:46 	upsmon 	39909 	Startup successful
Mar 7 14:00:46 	upsd 	90750 	Signal 15: exiting
Mar 7 14:00:46 	upsd 	90750 	mainloop: Interrupted system call
Mar 7 14:00:46 	upsd 	90750 	User monuser@::1 logged out from UPS [UPS-Local-USB]
Mar 7 14:00:46 	upsmon 	80446 	Signal 15: exiting

                            I have found this:

                            https://www.nas4free.org/forums/viewtopic.php?t=946
                            In port #17, he change the pollinterval to 10/15. Maybe a solution?

                            https://forums.freenas.org/index.php?threads/2-issues-behaviours-with-attached-and-identified-ups.24033/
                            or use a script with cron …

                            like he say: "I would be very happy to know that there's another/better solution."

                            thank for read my message

                            1 Reply Last reply Reply Quote 0
                            • dennypageD
                              dennypage
                              last edited by

                              Earlier in this thread:

                              https://forum.pfsense.org/index.php?topic=115349.msg679431#msg679431

                              1 Reply Last reply Reply Quote 0
                              • P
                                poluket
                                last edited by

                                ok, thanks

                                I will put the nut and usp on my linux server

                                thank you for your time

                                1 Reply Last reply Reply Quote 0
                                • S
                                  StarkJohan
                                  last edited by

                                  I just wanted to repeat a tip that dennypage (thanks!) mentioned earlier which seems to have helped me with my Eaton 5S repeatedly losing and reestablishing connection every few minutes on NUT 2.7.4_4 (haven't tried this UPS on earlier versions).

                                  Changing the poll interval to 10 worked around my issue. I think the default value is something ridiculous like 2 which in my case catches the very brief flakiness in the USB connection.

                                  Using the GUI, add the advanced setting "pollinterval=10" to ups.conf

                                  1 Reply Last reply Reply Quote 0
                                  • C
                                    cozkramer
                                    last edited by

                                    I'm not sure if this is the right spot, but if not please correct location.

                                    I've got a TrippLite Smart2200 connected with Nut running on Pf 2.4 using tripplite_usb, and ever since I've started using Nut the UPS runs a self-test once or twice a day..  Anyone have any thoughts or suggestions?  I have no problems with a self test once a month or even once a week, but daily just kills the ups..

                                    Thanks!

                                    1 Reply Last reply Reply Quote 0
                                    • dennypageD
                                      dennypage
                                      last edited by

                                      NUT itself doesn't invoke self-tests on a schedule. This is done by the UPS itself.

                                      There are usually configuration parameters that can be viewed and modified in the UPS. The complete list of NUT variables can be found here. Note that a given UPS model will generally only offer a small subset of these variables. Use the upsrw command to discover the list of variables you can modify. For your particular issue, the variable you are looking to modify is ups.test.interval.

                                      Further information on running commands can be found here. Be careful.

                                      1 Reply Last reply Reply Quote 0
                                      • C
                                        cozkramer
                                        last edited by

                                        Thanks Denny!

                                        After using upsrw, and only getting three outlet switch options, a delay shutdown and ups.id as modifiable, I fear a call to TrippLite is in order..

                                        1 Reply Last reply Reply Quote 0
                                        • dennypageD
                                          dennypage
                                          last edited by

                                          Your UPS is a network model, yes? If so, is there anything that is connecting to the UPS that could be initiating the self test?

                                          1 Reply Last reply Reply Quote 0
                                          • C
                                            cozkramer
                                            last edited by

                                            No, it's the non-network model..  I've got two usb cables plugged into it..  One to a (stupid) Windows 7 machine I need for Photography work, and the other goes to the BSD rig..  I've slightly cheated a little here, the cable is plugged into a freenas machine and I have pfsense nut talking to nut on the nas.  It's all bsd nuts though and so apparently they can't do anything but report it seems and I know the people here are nicer.  =)

                                            Here's a link to the unit I have https://www.tripplite.com/smartpro-120v-2.2kva-1.6kw-line-interactive-ups-tower-snmpwebcard-option-usb-db9-serial~SMART2200VS/

                                            If you know of a way to replace Lightroom on a *Nix/BSD System, I'm all ears!

                                            Thanks Danny!

                                            1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post