Unable to Sync Rules over HTTPS without XMLRPC Code 2 error

[ask]

Oh man – there really should be some better debugging for this stuff!

I have a dedicated interface with a "PASS everything" rule on that interface.

When I use HTTP it's working fine; with HTTPS it's not.  I get the "a communications error" error.  When I use "fetch" from the command line I can get to the other box on HTTPS just fine via the IPs from the dedicated interface.   When I save for example new rules I don't see any traffic with tcpdump from the primary box to the secondary box (on port 443).

I'm using a 1.2.1 snapshot from Aug 12.

[ipv2]

Hi,

Same problem here, working with http but with https get  the communication error.
Have done a lot of testing, also with a working config (1.2) but also no luck.

Have done some capture but no traffic on the second machine when applying the config on the first on.

Running:
1.2.1-RC1 built on Thu Aug 7 11:12:11 EDT 2008

[ask]

FWIW it seems to be the same problem with a snapshot from the last few days.