PfSense Installation freeze!! Help!!! (SOLVED)
-
I have a machine that freezes if I try to install the 64bit version of pfSense 2.3.2. The machines freezes after these two lines during boot:
KDB: debugger backends: ddb
KDB: current backend: ddbI can install the 32bit version with no problem. Here is the info about the hardware.
Machine: Mobo: Supermicro model: H8DM8-2 v: 1234567890
Bios: American Megatrends v: 080014 date: 10/22/2009
CPU(s): 2 Hexa core Six-Core AMD Opteron 2419s (-HT-MCP-SMP-) cache: 6144 KB
clock speeds: max: 1809 MHz
24Gb ECC Ram
Graphics: Card: Advanced Micro Devices [AMD/ATI] ES1000 bus-ID: 01:05.0Network: Card-1: NVIDIA MCP55 Ethernet
Card-2: NVIDIA MCP55 EthernetPlease help!!
-
How long did you wait? Wait for 20 minutes.
Press escape on keyboard when you see boot F1 message and type
boot -v
Hit enter.
You should see more info where boot stops. -
I waited 20min and 1hr but no keyboard inputs worked. I typed "esc" when the Welcome to pfSense menu came up. I typed boot -v to start, same message and stopping point.
booting…
KDB: debugger backends: ddb
KDB: current backend: ddb -
https://doc.pfsense.org/index.php/Boot_Troubleshooting#Disabling_ACPI
Try this.
Also, try to download and boot plain freebsd 10 installation, not pfsense.The BIOS have some option called "OS Installation"
try to set this to "Linux".
There are ACPI options that you can change and play around. -
Problem SOLVED! Turns out that I had a bad stick of ECC memory. Replaced it and she is up and running!!! Thanks for the help.