Atheros issues in recent snapshot.
-
I got a new wireless card for testing in my test Alix- went with a 5006 series instead of the usual fifth-gen 5212. It was cheap. Anyway, it seems to work under 1.2.1, but shows up as a 5212. (The card should be a 5413) 1.3 now has a more recent HAL, which correctly IDs the card, but then gets a HAL ABI mismatch.
1.3 pfSense-20080908-1051.img
ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
ath0: <atheros 5413="">mem 0xe00c0000-0xe00cffff irq 9 at device 12.0 on pci0
ath0: [ITHREAD]
ath0: HAL ABI mismatch detected (HAL:0x8052700 != driver:0x6102600)
device_attach: ath0 attach returned 6Same hardware on 1.2.1 pfSense-20080818-0000.img
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
ath0: <atheros 5212="">mem 0xe00c0000-0xe00cffff irq 9 at device 12.0 on pci0
ath0: [ITHREAD]
ath0: using obsoleted if_watchdog interface
ath0: Ethernet address: 00:02:6f:00:11:22
ath0: mac 10.4 phy 6.1 radio 6.3EDIT: Tested with a 2413, and it gets the same error.</atheros></atheros>
-
same here:
Sep 8 22:01:30 router kernel: ath0: <atheros 5212=""> mem 0xfeaf0000-0xfeafffff irq 9 at device 12.0 on pci2 Sep 8 22:01:30 router kernel: ath0: [ITHREAD] Sep 8 22:01:30 router kernel: ath0: HAL ABI mismatch detected (HAL:0x8052700 != driver:0x6102600) Sep 8 22:01:30 router kernel: device_attach: ath0 attach returned 6</atheros>worked in 1.2.1.
i'm running the latest build (sep8 21:22:02 EDT)
# uname -a FreeBSD router.e00.lan 7.0-RELEASE-p4 FreeBSD 7.0-RELEASE-p4 #0: Mon Sep 8 20:27:38 EDT 2008 sullrich@builder7.bgn.pfsense.org:/usr/obj.pfSense/usr/src/sys/pfSense.7 i386 -
card is detected in the latest snapshot (thanks!!), but when i submit the configuration for the interface, it spits back a 401 Unauthorized and completely locks up the web GUI, i have to restart the box to get it to work again.
system.log has the following to say:
Sep 9 19:30:03 router php: /interfaces.php: XML error: XML_ERR_NAME_REQUIRED at line 240 -
Can you please send me the config.xml part where your wireless parameters are saved so i can take a look at it.
It happens only with certain parameters i cannot replicate.
