WAN will not obtain DHCP address

[warmspit]

I see DHCP requests going to my provider (Verizon Westel 2100 in bridge mode) but I get no DHCPOFFER from them.  The DSL is up and running on my Cisco 3640, plug the service into the pfsense box and it does not work.  Any ideas?

pfSense-1.2-Embedded.img  running on Soekris 5501-70

vr0: flags=8843 <up,broadcast,running,simplex,multicast>mtu 1500
        inet6 fe80::200:24ff:feca:cb4%vr0 prefixlen 64 scopeid 0x1
        inet 0.0.0.0 netmask 0xff000000 broadcast 255.255.255.255
        ether 00:00:24:ca:0c:b4
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active

23:51:39.604670 IP (tos 0x10, ttl  16, id 0, offset 0, flags [none], proto: UDP (17), length: 328) 0.0.0.0.bootpc > 255.255.255.255.bootps: [udp sum ok] BOOTP/DHCP, Request from 00:00:24:ca:0c:b4 (oui Unknown), length: 300, xid:0x67ff35a4, secs:42, flags: [none] (0x0000)
          Client Ethernet Address: 00:00:24:ca:0c:b4 (oui Unknown)
          Vendor-rfc1048:
            DHCP:DISCOVER
            CID:[ether]00:00:24:ca:0c:b4
            HN:"pfSense"
            PR:SM+BR+TZ+T121+DG+DN+NS+HN</full-duplex></up,broadcast,running,simplex,multicast>

[warmspit]

Problem turned out to be a broke ass Juniper (Unishpere) Erx that had to have the current DHCP lease cleared.  It would ignore new requests or releases.