No connection between lan's after changing gateway

theptr

Hi,

I have some problems with my pfsense 2.3.2.
So i have 4 physical connections (nic's) 1 of these connections has 2 vlan's on it.
Everything worked good i could connect with devices on the other nic's till i changed some stuff.
I wanted to route al my traffic from 1 vlan with id 25 true a openvpn connection.
This worked after i made a interface of the openvpn connection and made a rule that says allow to everywhere and gateway openvpn interface.
Then i changed on my other lans the rules to gateway default wan.
Since i have done this i can not connect between devices on different nic's / vlan's.
Now i don't now how to fix this….
I have made some screenshot's so you can see what i did.

Image's : http://imgur.com/a/B29pv

viragomann

@theptr:

Then i changed on my other lans the rules to gateway default wan.
Since i have done this i can not connect between devices on different nic's / vlan's.

Why?
With this rule you only allow traffic over WANGW, no other one.
Set the WANGW as default and let the gateway option in the rules at "default".

theptr

Hi Viragomann,

First thanks for helping me :) .
I did what you say but when i reconnect my vpn client i have no longer internet on the interfaces…
When i change the rules to WANGW i have internet but no connection between lan's.
So is there something else i need to set ?

@viragomann:

@theptr:

Then i changed on my other lans the rules to gateway default wan.
Since i have done this i can not connect between devices on different nic's / vlan's.

Why?
With this rule you only allow traffic over WANGW, no other one.
Set the WANGW as default and let the gateway option in the rules at "default".

theptr

screenshots :

Notice the block rules are disabled

viragomann

So I presume, your vpn client is your default gateway.
Check the routes in Diagnostic > Routes and post it please.

theptr

Hi Viragomann,

Here is a screenshot of the ipv4 routes.

@viragomann:

So I presume, your vpn client is your default gateway.
Check the routes in Diagnostic > Routes and post it please.

viragomann

Was the openVPN client connection established when this screenshot was taken?