Comcast modem/router not in bridge mode. How can I make tcpip6 work?

timmiet

here is my full setup.
comcast modem/router (DNS and DHCP on)-> pfsense 2.2.4 (DNS and DHCP off) -> Server 2012r2 (DNS and DHCP on)
server has a static IPV4 but IP6 is Obtain automatically.
from pfsense I can ping tcpip6 from server I can not.

comcast router IP 192.168.107.1
PFSense IP 192.168.7.1
Windows Server 192.168.7.10

I'm very very very very TCPIPV6 stupid please help.
:)

Gertjan

I can't help you with your router after router setup (PfSense after ComCast) but IPv6 …. https://ipv6.he.net/certification/ we all began there ;) )

See here : https://forum.pfsense.org/index.php?topic=122670.0 ( so it IS possible )

hendersonmc

@timmiet:

here is my full setup.
comcast modem/router (DNS and DHCP on)-> pfsense 2.2.4 (DNS and DHCP off) -> Server 2012r2 (DNS and DHCP on)
server has a static IPV4 but IP6 is Obtain automatically.
from pfsense I can ping tcpip6 from server I can not.

comcast router IP 192.168.107.1
PFSense IP 192.168.7.1
Windows Server 192.168.7.10

I'm very very very very TCPIPV6 stupid please help.
:)

To start, I would test with a computer connected directly to the Comcast modem. If that doesn't work, you will never be able to get a Comcast to Pfsense to (same) computer to work…