[SOLVED] APU.2C4 mit Huawei ME909s120



  • Hallo Gemeinde,

    mein Name ist Alex und ich bin von ipcop auf einem Alix 2D13 auf pfsense auf einem APU.2C4 umgestiegen. Nun kämpfe ichmit dem ein oder anderen Verständnis problem und hoffe ihr könnt mir dabei weiter helfen.

    Widmen wir uns doch als erstes mal dem LTE Huawei ME909s120 pcie Modul was laut der Liste der Kompatibilität tu pfsense (FreeBSD) funktionieren sollte.
    Ich habe das Modul im PCIe Slot 1 installiert der mit dem SIM Slot J13 auf dem APU Board verknüpft wein sollte, Sim Karte ist eingelegt.

    Erste Frage, kann ich über die Shell abfragen ob die Karte vom System erkannt wurde?

    Ich habe die Installation laut einigen Anleitungen zu 3G USB Sticks gemacht, ich denke hier liegt das Problem.

    Device angelegt unter Intterfaces > assign  > PPPs

    Link Typ PPP

    Link Interfaces /dev/cuau0

    /dev/cuau0
    /dev/cuau1
    /dev/cuau0.0
    /dev/cuau0.1
    /dev/cuau0.2
    /dev/cuau0.3
    /dev/cuau0.4
    stehen zur Auswahl.

    Mich beschleicht allerdings das Gefühl das dies USB Ports sind und nicht wie gewünscht die Interne PCIe Karte.

    Das Syslog sagt folgendes dazu bei /dev/cuau0

    [opt2_link0] Link: reconnection attempt 589
    [opt2_link0] can't open /dev/cuau0: Device busy
    [opt2_link0] Modem: Fail to open serial port /dev/cuau0 on speed 115200
    [opt2_link0] Link: DOWN event
    [opt2_link0] LCP: Down event.

    bei allen anderen Link Interfacen bekomme ich ebenfalls ein Error das sie nicht vorhanden seien.

    Ich hoffe ich habe es so ausführlich wiedergegeben wie es geht und es wäre fürchterlich nett wenn ihr mir auf die Sprünge helfen könntet.

    Einen freundlichen Gruß
    Alex



  • Update

    miniPCIe umgesteckt und siehe da, es wird zumindest kommuniziert.

    Jetzt bekomme ich die Fehlermeldung auf Link Device /dev/cuau1

    Dec 29 20:52:50

    |
    |
    |
    |

    [/t][/t]

    | Dec 29 20:53:04 | ppp |
    |

    [opt2_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label. [/t]

    | Dec 29 20:53:04 | ppp |
    |

    [opt2_link0] MODEM: chat script failed [/t]

    | Dec 29 20:53:04 | ppp |
    |

    [opt2_link0] Link: DOWN event [/t]

    | Dec 29 20:53:04 | ppp |
    |

    [opt2_link0] LCP: Down event [/t]



  • Wieder ein Schritt weiter

    Link Interface /dev/cualu0.2

    Kommunikation zum Modem mit Standard init string AT&F&C1&D2E0S0=0M1 der automatisch vorgegeben wird. Versuche mit einzelnen Befehlen wie, &F, &C usw. in allen Kombinationen schlugen fehl. Eine init string für das Huawei ME909s-120 konnte ich nicht finden und das "Detected Hayes compatible moden" ist ebenfalls die Suche im Heuhaufen.

    Dec 29 22:39:45 ppp [opt2_link0] CHAT: The modem responded with "ERROR" to the command "AT&F&C1&D2E0S0=0M1" at ModemCmd: label.
    Dec 29 22:39:45 ppp [opt2_link0] CHAT: Detected Hayes compatible modem.
    Dec 29 22:39:45 ppp [opt2_link0] CHAT: +CGDCONT=1,"IP","internet"
    Dec 29 22:39:45 ppp [opt2_link0] CHAT: +CPIN: READY
    Dec 29 22:39:45 ppp [opt2_link0] CHAT: +CPIN?

    Liebe grüße und Gute Nacht

    In der Hoffnung das mir morgen jemand weiter helfen kann…



  • Schon mal das hier versucht?
    https://forum.pfsense.org/index.php?topic=77270.msg426566#msg426566
    Hatte bei mir damals geholfen.



  • So, es hat mir doch keine Ruhe gelassen und ich habe die halbe Nacht noch etwas getüfftelt.

    Inzwischen bekomme ich zumindest schon einmal eine IP Adresse zugewiesen, Im Dashboard > Gateways wird 4G_WAN zumindest als offline angezeigt.

    hier die Konfiguration und dem dazugehörigen Syslog System und ppp

    Link Interface /dev/cuau0.0

    init string  AT&F

    Was  mir aufgefallen ist das sich die ganzen Device Einstellungen und Veränderungen nach einem Neustart der FW bemerkbar machen. D.H. Änderung vor nehmen, neustarten und hoffen.

    Syslog System

    
    Dec 30 10:59:21     php-fpm     51284     /interfaces_ppps_edit.php: Starting 3gstats.php on device 'cuaU0.4' for interface 'opt2'
    Dec 30 10:59:20     php-fpm     59231     /rc.start_packages: Restarting/Starting all packages.
    Dec 30 10:59:20     check_reload_status         Reloading filter
    Dec 30 10:59:20     check_reload_status         Restarting OpenVPN tunnels/interfaces
    Dec 30 10:59:20     check_reload_status         Restarting ipsec tunnels
    Dec 30 10:59:20     check_reload_status         updating dyndns 4G_WAN_PPP
    Dec 30 10:59:19     check_reload_status         Starting packages
    Dec 30 10:59:19     php-fpm     51761     /rc.newwanip: pfSense package system has detected an IP change or dynamic WAN reconnection - 10.183.204.22 -> 10.53.79.7 - Restarting packages.
    Dec 30 10:59:17     php-fpm     51761     /rc.newwanip: Creating rrd update script
    Dec 30 10:59:17     php-fpm     51761     /rc.newwanip: Resyncing OpenVPN instances for interface 4G_WAN.
    Dec 30 10:59:16     xinetd     20884     Reconfigured: new=0 old=1 dropped=0 (services)
    Dec 30 10:59:16     xinetd     20884     readjusting service 6969-udp
    Dec 30 10:59:16     xinetd     20884     Swapping defaults
    Dec 30 10:59:16     xinetd     20884     Starting reconfiguration
    Dec 30 10:59:16     php-fpm     51761     /rc.newwanip: IP has changed, killing states on former IP 10.183.204.22.
    Dec 30 10:59:16     php-fpm     51761     /rc.newwanip: rc.newwanip: on (IP address: 10.53.79.7) (interface: 4G_WAN[opt2]) (real interface: ppp0).
    Dec 30 10:59:16     php-fpm     51761     /rc.newwanip: rc.newwanip: Info: starting on ppp0.
    Dec 30 10:59:15     ppp         [opt2] IFACE: Rename interface ng0 to ppp0
    Dec 30 10:59:15     ppp         [opt2] IFACE: Up event
    Dec 30 10:59:15     check_reload_status         rc.newwanip starting ppp0
    Dec 30 10:59:14     check_reload_status         Rewriting resolv.conf
    Dec 30 10:59:14     ppp         [opt2] 10.53.79.7 -> 10.64.64.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: LayerUp
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Ack-Sent --> Opened
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Ack #4 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #4
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] 10.53.79.7 is OK
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Nak #3 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #3
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Reject #2 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: LayerFinish
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Req-Sent --> Stopped
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: protocol was rejected by peer
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: protocol IPV6CP was rejected
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Protocol Reject #2 (Opened)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #2
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Nak #1 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Req-Sent --> Ack-Sent
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigAck #1
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Request #1 (Req-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: Up event
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2] IPCP: Up event
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: LayerStart
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: Open event
    Dec 30 10:59:14     ppp         [opt2] IPCP: LayerStart
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2] IPCP: Open event
    Dec 30 10:59:14     ppp         [opt2] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
    Dec 30 10:59:14     ppp         [opt2_link0] Link: Join bundle "opt2"
    Dec 30 10:59:14     ppp         [opt2_link0] Link: Matched action 'bundle "opt2" ""'
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: authorization successful
    Dec 30 10:59:14     ppp         [opt2_link0] MESG: Welcome!!
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: rec'd SUCCESS #1 len: 13
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: sending RESPONSE #1 len: 25
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: Using authname "user"
    Dec 30 10:59:14     ppp         [opt2_link0] Name: "HUAWEI_CHAP_SRVR"
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: rec'd CHALLENGE #1 len: 37
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: LayerUp
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: auth: peer wants CHAP, I want nothing
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Ack-Sent --> Opened
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x493cad2a
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x000a0000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Req-Sent --> Ack-Sent
    Dec 30 10:59:14     ppp         [opt2_link0] AUTHPROTO CHAP MD5
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x00000543
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x00000000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: SendConfigAck #1
    Dec 30 10:59:14     ppp         [opt2_link0] AUTHPROTO CHAP MD5
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x00000543
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x00000000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Configure Request #1 (Req-Sent)
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x493cad2a
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x000a0000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: Up event
    Dec 30 10:59:14     ppp         [opt2_link0] Link: UP event
    Dec 30 10:59:14     ppp         [opt2_link0] MODEM: chat script succeeded
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Connected at 150000000.
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: ATDT*99#
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Dialing server at *99#...
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Detected Custom modem.
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: LayerStart
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: Open event 
    
    

    ppp

    
    Dec 30 10:59:15     ppp         [opt2] IFACE: Rename interface ng0 to ppp0
    Dec 30 10:59:15     ppp         [opt2] IFACE: Up event
    Dec 30 10:59:14     ppp         [opt2] 10.53.79.7 -> 10.64.64.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: LayerUp
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Ack-Sent --> Opened
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Ack #4 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #4
    Dec 30 10:59:14     ppp         [opt2] SECDNS 193.189.244.206
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 193.189.244.225
    Dec 30 10:59:14     ppp         [opt2] 10.53.79.7 is OK
    Dec 30 10:59:14     ppp         [opt2] IPADDR 10.53.79.7
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Nak #3 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #3
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Reject #2 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: LayerFinish
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Req-Sent --> Stopped
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: protocol was rejected by peer
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: protocol IPV6CP was rejected
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Protocol Reject #2 (Opened)
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #2
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Nak #1 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Req-Sent --> Ack-Sent
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigAck #1
    Dec 30 10:59:14     ppp         [opt2] IPCP: rec'd Configure Request #1 (Req-Sent)
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: Up event
    Dec 30 10:59:14     ppp         [opt2] SECDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] PRIDNS 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Dec 30 10:59:14     ppp         [opt2] IPADDR 0.0.0.0
    Dec 30 10:59:14     ppp         [opt2] IPCP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2] IPCP: Up event
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: LayerStart
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2] IPV6CP: Open event
    Dec 30 10:59:14     ppp         [opt2] IPCP: LayerStart
    Dec 30 10:59:14     ppp         [opt2] IPCP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2] IPCP: Open event
    Dec 30 10:59:14     ppp         [opt2] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
    Dec 30 10:59:14     ppp         [opt2_link0] Link: Join bundle "opt2"
    Dec 30 10:59:14     ppp         [opt2_link0] Link: Matched action 'bundle "opt2" ""'
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: authorization successful
    Dec 30 10:59:14     ppp         [opt2_link0] MESG: Welcome!!
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: rec'd SUCCESS #1 len: 13
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: sending RESPONSE #1 len: 25
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: Using authname "user"
    Dec 30 10:59:14     ppp         [opt2_link0] Name: "HUAWEI_CHAP_SRVR"
    Dec 30 10:59:14     ppp         [opt2_link0] CHAP: rec'd CHALLENGE #1 len: 37
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: LayerUp
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: auth: peer wants CHAP, I want nothing
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Ack-Sent --> Opened
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x493cad2a
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x000a0000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Req-Sent --> Ack-Sent
    Dec 30 10:59:14     ppp         [opt2_link0] AUTHPROTO CHAP MD5
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x00000543
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x00000000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: SendConfigAck #1
    Dec 30 10:59:14     ppp         [opt2_link0] AUTHPROTO CHAP MD5
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x00000543
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x00000000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: rec'd Configure Request #1 (Req-Sent)
    Dec 30 10:59:14     ppp         [opt2_link0] MAGICNUM 0x493cad2a
    Dec 30 10:59:14     ppp         [opt2_link0] MRU 1500
    Dec 30 10:59:14     ppp         [opt2_link0] ACCMAP 0x000a0000
    Dec 30 10:59:14     ppp         [opt2_link0] PROTOCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] ACFCOMP
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: SendConfigReq #1
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Starting --> Req-Sent
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: Up event
    Dec 30 10:59:14     ppp         [opt2_link0] Link: UP event
    Dec 30 10:59:14     ppp         [opt2_link0] MODEM: chat script succeeded
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Connected at 150000000.
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: ATDT*99#
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Dialing server at *99#...
    Dec 30 10:59:14     ppp         [opt2_link0] CHAT: Detected Custom modem.
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: LayerStart
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: state change Initial --> Starting
    Dec 30 10:59:14     ppp         [opt2_link0] LCP: Open event
    Dec 30 10:59:14     ppp         [opt2_link0] Link: OPEN event
    Dec 30 10:59:14     ppp         [opt2] Bundle: Interface ng0 created 
    
    

    Also für mich sieht das erstal so aus als ob alles ok sei, einen ping bekomme ich jedoch nicht über das 4G_WAN raus.

    @flix87
    Danke schön, aber das hilft mir nicht wirklich weiter :)



  • Huhu Gemeinde,

    die bastelei geht weiter. Da offensichtlich ist hier sehr wenig Erfahrung über das ganze mobile Internet, was bleibt einem anderes übrig zu recherchieren was das Zeug hält und mit einer Engel Geduld testen.

    Dann mal zu dem Aktuellen Stand…..

    Zwischenzeitlich habe ich ein pdf Dokument zu meinem miniPCIe Modul gefunden, in diesem wird die init string Kommunikation erklärt. Also nix mit einfach string kopieren :(
    Dieses Dokument werde ich erst einmal abarbeiten und im Anschluß vermutlich ausführlich Auskunft geben können was welcher Befehl bedeutet. Einfach ist anders!

    Eine Dokumentation zur miniPCIe Huawei ME909s-120 gibt es hier : http://consumer.huawei.com/en/solutions/m2m-solutions/products/support/user-guides/me909s_120_minipcie_en.htm

    Mitlerweile habe ich auch raus bekommen wie ich über die Console die AT Befehle testen kann ohne die pfsense andauernd neu zu starten.

    Mit dem Befehl

    cu -l /dev/cuaU0.0

    lade ich eine Konsole in der ich die AT Befehle eingeben kann und sofort einen Antwort bekomme.

    Jetzt gilt zu heraus zu bekommen welcher Befehl was bedeutet und was wird auf der Gegenstelle erwartet.

    Eine IP und Verbindung bekomme ich mitlerweile aufgebaut, der Ping geht auch über diese Verbindung von der pfSense raus. Das Gateway wird allerdings als Offline erkannt und auch so behandelt. Offensichtlich fehlen da noch ein paar Befehle in der init string.

    Die Suche geht weiter…....



  • Neue Erkenntnisse  ;D

    Mit den AT Befehlen stellt man das Modem ein damit es weiß was es zu tun hat…....

    Weiß zufällig jemand welche Befhle benötigt werden um sich beim Provider anzumelden, also die Ablaufsstruktur des Init Strings.

    Mit AT&F rufe ich nur das default Profil im Modem auf. Damit bekomme ich allerdings nur eine "halbe" Anmeldung.

    Stay tuned

    PS: wenn ich raus habe gibts ein HowTo ;)



  • Update!

    4G_WAN ist online, allerdings wird das Gateway als offline aufgeführt in auf dem Dashboard.
    Ping von der pfSense gehen sauber raus und auch die Rechner können über Gateway 4G_WAN auf das Internet zugreifen.

    Möglich gemacht habe ich es wie folgt.

    Als init string wurde folgendes eingegeben

    (AT)&F&C1E1S0=0

    &F läd die akteulle Konfiguration von dem Modem Modul, bei mir auf Werksteinstellung zurück gesetzt.

    &C1 fragt die Verbindung zur Gegenstelle ab und gibt den Wert online ggf raus (in meinem Fall wird das signal aber nicht richtig aufgefasst.)

    E1 schaltet den Echo Mode an

    S0=0 schaltet den Lautsprecher aus

    Hier der Auszug aus dem Syslog PPP

    
     Jan 5 11:39:29 	ppp 		[opt6] IFACE: Rename interface ng0 to ppp0
    Jan 5 11:39:29 	ppp 		[opt6] IFACE: Up event
    Jan 5 11:39:28 	ppp 		[opt6] 10.148.221.143 -> 10.64.64.0
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: LayerUp
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Ack-Sent --> Opened
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Ack #4 (Ack-Sent)
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #4
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 193.189.244.206
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 193.189.244.225
    Jan 5 11:39:28 	ppp 		[opt6] 10.148.221.143 is OK
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 10.148.221.143
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Nak #3 (Ack-Sent)
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #3
    Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Reject #2 (Ack-Sent)
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: LayerFinish
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Req-Sent --> Stopped
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: protocol was rejected by peer
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: protocol IPV6CP was rejected
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Protocol Reject #2 (Opened)
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #2
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Nak #1 (Ack-Sent)
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Req-Sent --> Ack-Sent
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigAck #1
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: rec'd Configure Request #1 (Req-Sent)
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: SendConfigReq #1
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Starting --> Req-Sent
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: Up event
    Jan 5 11:39:28 	ppp 		[opt6] SECDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] PRIDNS 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] COMPPROTO VJCOMP, 16 comp. channels, no comp-cid
    Jan 5 11:39:28 	ppp 		[opt6] IPADDR 0.0.0.0
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: SendConfigReq #1
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Starting --> Req-Sent
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: Up event
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: LayerStart
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: state change Initial --> Starting
    Jan 5 11:39:28 	ppp 		[opt6] IPV6CP: Open event
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: LayerStart
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: state change Initial --> Starting
    Jan 5 11:39:28 	ppp 		[opt6] IPCP: Open event
    Jan 5 11:39:28 	ppp 		[opt6] Bundle: Status update: up 1 link, total bandwidth 150000000 bps
    Jan 5 11:39:28 	ppp 		[opt6_link0] Link: Join bundle "opt6"
    Jan 5 11:39:28 	ppp 		[opt6_link0] Link: Matched action 'bundle "opt6" ""'
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: authorization successful
    Jan 5 11:39:28 	ppp 		[opt6_link0] MESG: Welcome!!
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: rec'd SUCCESS #1 len: 13
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: sending RESPONSE #1 len: 25
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: Using authname "user"
    Jan 5 11:39:28 	ppp 		[opt6_link0] Name: "HUAWEI_CHAP_SRVR"
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAP: rec'd CHALLENGE #1 len: 37
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: LayerUp
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: auth: peer wants CHAP, I want nothing
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Ack-Sent --> Opened
    Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x6d53d722
    Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x000a0000
    Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Configure Ack #1 (Ack-Sent)
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Req-Sent --> Ack-Sent
    Jan 5 11:39:28 	ppp 		[opt6_link0] AUTHPROTO CHAP MD5
    Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x00000543
    Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x00000000
    Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: SendConfigAck #1
    Jan 5 11:39:28 	ppp 		[opt6_link0] AUTHPROTO CHAP MD5
    Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x00000543
    Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x00000000
    Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: rec'd Configure Request #1 (Req-Sent)
    Jan 5 11:39:28 	ppp 		[opt6_link0] MAGICNUM 0x6d53d722
    Jan 5 11:39:28 	ppp 		[opt6_link0] MRU 1500
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACCMAP 0x000a0000
    Jan 5 11:39:28 	ppp 		[opt6_link0] PROTOCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] ACFCOMP
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: SendConfigReq #1
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: state change Starting --> Req-Sent
    Jan 5 11:39:28 	ppp 		[opt6_link0] LCP: Up event
    Jan 5 11:39:28 	ppp 		[opt6_link0] Link: UP event
    Jan 5 11:39:28 	ppp 		[opt6_link0] MODEM: chat script succeeded
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Connected at 150000000.
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: ATDT*99#
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Dialing server at *99#...
    Jan 5 11:39:28 	ppp 		[opt6_link0] CHAT: Detected Custom modem.
    Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: LayerStart
    Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: state change Initial --> Starting
    Jan 5 11:39:27 	ppp 		[opt6_link0] LCP: Open event
    Jan 5 11:39:27 	ppp 		[opt6_link0] Link: OPEN event
    Jan 5 11:39:27 	ppp 		[opt6] Bundle: Interface ng0 created
    Jan 5 11:39:27 	ppp 		web: web is not running
    Jan 5 11:39:27 	ppp 		process 45586 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016) 
    
    ``` 
    
    Stay tuned ;)


  • Hello, I have a ME909s-120 and a APU2C4 however I only have two devices listed:

    When I try with the /dev/cuau0 it shows:

    Mar 7 01:52:40 ppp [opt5_link0] can't open /dev/cuau0: Device busy
    Mar 7 01:52:40 ppp [opt5_link0] MODEM: Fail to open serial port /dev/cuau0 on speed 115200
    Mar 7 01:52:40 ppp [opt5_link0] Link: DOWN event
    Mar 7 01:52:40 ppp [opt5_link0] LCP: Down event
    Mar 7 01:52:40 ppp [opt5_link0] Link: reconnection attempt 12 in 4 seconds

    When I try with the /dev/cuau1 it shows:

    Mar 7 01:54:00 ppp Multi-link PPP daemon for FreeBSD
    Mar 7 01:54:00 ppp process 92444 started, version 5.8 (root@pfSense_v2_3_2_amd64-pfSense_v2_3_2-job-04 16:03 19-Jul-2016)
    Mar 7 01:54:00 ppp waiting for process 93269 to die…
    Mar 7 01:54:00 ppp caught fatal signal TERM
    Mar 7 01:54:00 ppp [opt5] IFACE: Close event
    Mar 7 01:54:00 ppp [opt5] IPCP: Close event
    Mar 7 01:54:00 ppp [opt5] IPV6CP: Close event
    Mar 7 01:54:01 ppp waiting for process 93269 to die…
    Mar 7 01:54:01 ppp [opt5_link0] LCP: Close event
    Mar 7 01:54:01 ppp [opt5_link0] LCP: state change Starting –> Initial
    Mar 7 01:54:01 ppp [opt5_link0] LCP: LayerFinish
    Mar 7 01:54:02 ppp [opt5] Bundle: Shutdown
    Mar 7 01:54:02 ppp [opt5_link0] Link: Shutdown
    Mar 7 01:54:02 ppp process 93269 terminated
    Mar 7 01:54:02 ppp web: web is not running
    Mar 7 01:54:02 ppp [opt5] Bundle: Interface ng0 created
    Mar 7 01:54:02 ppp [opt5_link0] Link: OPEN event
    Mar 7 01:54:02 ppp [opt5_link0] LCP: Open event
    Mar 7 01:54:02 ppp [opt5_link0] LCP: state change Initial –> Starting
    Mar 7 01:54:02 ppp [opt5_link0] LCP: LayerStart
    Mar 7 01:54:16 ppp [opt5_link0] CHAT: The modem is not responding to "AT" at ModemCmd: label.
    Mar 7 01:54:16 ppp [opt5_link0] MODEM: chat script failed
    Mar 7 01:54:16 ppp [opt5_link0] Link: DOWN event
    Mar 7 01:54:16 ppp [opt5_link0] LCP: Down event
    Mar 7 01:54:16 ppp [opt5_link0] Link: reconnection attempt 1 in 4 seconds
    Mar 7 01:54:20 ppp [opt5_link0] Link: reconnection attempt 1

    I have the Huawei ME909s-120 on J13 with SIM on Slot 1.

    I have tried the command :

    cu -l /dev/cuau0

    /dev/cuau0: Device busy
    link down

    cu -l /dev/cuau1

    Stale lock on cuau1 PID=92444… overriding.
    Connected

    It stucks, I can't type anything



  • Hi mitra7,

    you have to put the ME909s-120 Card to the mimiPCIe Slot 2. Read the manuel at page 8 https://pcengines.ch/pdf/apu2.pdf

    cuau0 and cuau1 are only for USB devices.

    change the card to slot 2 and reboot the pfsense. After reboot check if ME909s-120 is detected ant the web Interface

    Interfaces > assign > ppp

    in my case there are 4 other devices, cuau0.0, cuau0.1, cuau0.2,cuau0.3 and cuau0.4

    add a ppp connection with the information of your ISP and check.



  • http://i.imgur.com/cAvELxL.jpg
    http://i.imgur.com/J9y6XwM.jpg
    http://i.imgur.com/upeKjdV.jpg

    The Mini-PCI Card is detected as the following shows:
    usbconfig dump_device_desc

    ugen1.3: <huawei mobile="" v7r11="" huawei="" technologies="" co.,="" ltd.="">at usbus1, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (2mA)

    bLength = 0x0012
      bDescriptorType = 0x0001
      bcdUSB = 0x0210
      bDeviceClass = 0x0000  <probed by="" interface="" class="">bDeviceSubClass = 0x0000
      bDeviceProtocol = 0x00ff
      bMaxPacketSize0 = 0x0040
      idVendor = 0x12d1
      idProduct = 0x15c1
      bcdDevice = 0x0102
      iManufacturer = 0x0001  <huawei technologies="" co.,="" ltd.="">iProduct = 0x0002  <huawei mobile="" v7r11="">iSerialNumber = 0x0003  <0123456789ABCDEF>
      bNumConfigurations = 0x0003</huawei></huawei></probed></huawei>

    However no new devices are created on /dev
    I don't understand…



  • i checked my box and got the same result

    the ME909s-120 is installed at usbus1.

    Without the card i got also only cuau0 and cuau1, beyond i installed the ME909s-120 there are appeared cuau0.0 - cuau0.4 as Link Interfaces.
    but it's only able to connect with cu -l to cuaU0.0 and cuaU0.4 and only with cuaU0.0 it's possible to connect.



  • Which version of Pfsense do you have?
    I have the nanobsd amd64

    2.3.2-RELEASE-p1 (amd64)
    built on Tue Sep 27 12:13:07 CDT 2016
    FreeBSD 10.3-RELEASE-p5



  • the current Version

    pfSense-memstick-2.3.2-RELEASE

    AMD64 USB Memstick Intaller

    2.3.2-RELEASE-p1 (amd64)
    built on Tue Sep 27 12:13:07 CDT 2016
    FreeBSD 10.3-RELEASE-p9



  • I'll try to change mine to match yours or to a more recent one.



  • @mitra7:

    I'll try to change mine to match yours or to a more recent one.

    I'll try to find the right AT command 's for the ME909s-120 ;)



  • Update

    Verbindung zum Internet bekomme ich über /dev/cuaU0.0, dafür benötige ich lediglich den Befehl &F um dem Modem über den Init string zu sagen das es auf default gesetzt ist.
    IP bekomme ich zugewiesen und kann auch über das Gateway ins Internet. Habe laut pfSense etwa 150MB über die LTE Leitung gejagt. Beim Speedtest ist mir aufgefallen das ein Ping auf meine IP nicht moglich ist.
    Und bei meinem Provider WinSim wird zumindest bisher der Traffic auch nicht mitgezählt, was sehr ungewöhnlich ist.

    Weiterhin bekomme ich das 4G_WAN als Offline angezeigt, was offensichtlich damit zu tun hat das kein Ping durch geht. Den Ping den die pfSense absetzt um zu sehen ob die Leitung online ist verschwindet im Nirvana und kommt nicht zurück.

    Wenn jemand eine Idee dazu hat…...... Liebend gerne ;)

    I got a connection to the internet with the device /dev/cuau0.0 and i just need the AT code &F to setup the Modem to default. I got an IP address and it's possible to connect to the internet. i made a speedtest and loaded round about 150MB wit the G4_WAN, but there's one mysterious thing, it's not possible to ping my WAN address an i guess ist's also the reasen why the 4G_WAN is shown offline on the dashboard of the pfsense.

    i've no idea what i've to do now, if anywhere has an idea ....... your welcome ;)



  • I've updated my PFSense and now I have the FreeBSD 10.3-RELEASE-p9. Now it displays the devices!



  • Now I have Internet connection too!
    I've checked and in the Gateway Monitoring the WAN shows Down also. I belive that's because my and your ISP blocks ICMP or TCP/UDP in their internal network.
    Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.



  • @mitra7:

    ….....
    Configuring an alternative Monitor IP on System -> Routing -> Gateways -> 4G_WAN (Your WAN Name) might solve the problem.

    Thank you, let's try it with a Monitor IP.



  • I got it… temporary

    I used the the IP Address who print out in the System Log

    [opt6] IPADDR xx.xx.xx.xx

    But i guess the IP will change after the next reconnect, i will try it.



  • Every time i connect the 4G_WAN to net i got a IPADDR, but everyone change it every time to the same IP Address

    
    an 6 09:41:27 	ppp 		[opt6] xx.xx.83.56 -> 10.64.64.0
    Jan 6 09:41:27 	ppp 		[opt6] IPCP: LayerUp
    Jan 6 09:41:27 	ppp 		[opt6] IPCP: state change Ack-Sent --> Opened
    Jan 6 09:41:27 	ppp 		[opt6] SECDNS xx.xx.121.18
    Jan 6 09:41:27 	ppp 		[opt6] PRIDNS xx.xx.121.17
    Jan 6 09:41:27 	ppp 		[opt6] IPADDR xx.xx.83.56 
    
    

    I checked the IPADDR and its possible to connected from outsite with TCP and UDP. Why does the IP change ervery time to the static one.

    I will try to check the default modem settings.



  • Update …..

    The IP 10.64.64.0 is set as default if the ISP offers no Gateway IP, i found some information about the mystic IP

    here some links about it
    https://redmine.pfsense.org/issues/5273
    https://redmine.pfsense.org/issues/919

    Now the question, is it possible to teach the Modem to asking about the Gateway IP?

    I can't find anything about the Gateway IP in the manual of the ME909S-120 modem.

    Edit:

    Another issue is if you use a limited plan the monitor check need round about 2 MiB per day to check the online status…..



  • Danke xidendt!

    Mit deinen Infos war es ein Kinderspiel das ME909s-120 auf meinem Intel NUC DC3217IYE zum Laufen zu bekommen.

    Hier noch ein paar nützliche Infos für Intel NUC Nutzer:

    • mSATA läuft NUR auf dem PCIE_FMC (full size)
    • Um das Modem auf dem PCIE_HMC (half size) betreiben zu können, benutze ich einen mPCIE-Extender, wie den P22S-P22F-SIM. Das praktische: SIM-Karten-Slot ist bereits integriert
    • Schöne Gehäuse mit passiver Kühlung gibts von akasa, wie das newton (AK-ITX07-BK). Dieses hat bereits 2 Löcher für die Antennen-Buchsen. Dort ist auch genug Platz für den mPCIE-Extender. Das Modem habe ich mit selbstklebendem Wärmeleitpad an das Case geklebt.

    Die Leistung des NUC benötige ich, um eine VPN-Verbindung für diverse Streaming-Dienste nutzen zu können. Ich route bestimmte IPs der TVs durch die VPN-Verbindung.



  • exactly how did you solve this problem?
    I have the same problem


 

© Copyright 2002 - 2018 Rubicon Communications, LLC | Privacy Policy