SG-1000 No WAN Access
-
Hi Everyone,
I just received the SG-1000(2.4.0-BETA (arm)) and wanted to play around with it. Hooked a laptop up to the LAN and accessed the GUI went through the initial setup using DHCP to setup the wan. I started pinging my router and it initially worked for about 10 seconds then goes to "Request timed out". I remove the wan cord then put it back in and it works for another 10-20 seconds and goes back to doing the same thing. I go to the status/Interfaces and see that the Wan status is up but nothing seems to be going through. I'm using the standard firewall rules so I don't think that's a possible issue. I'm trying to track down what exactly could be going on. Any help you could offer would be appreciated.
-
perhaps you wan & lan are inside the same subnet ?
-
The wan is a 10.0.x.x /16 and the LAN side is the default 192.168.1.x /24.