Traffic shaper config



  • Hi, this is probably extremely simply to setup but I seem to have found no information so far from Google.

    Basically I have 1 WAN 1 LAN and 1 Wireless

    LAN and Wireless are on separate subnets.

    I want wireless to have limited bandwidth to prevent the traffic on it hogging stuff on LAN.

    How do I set this up in the traffic shaper?



  • solved



  • Whatever you do, don't share your solution because that might help someone else, and we certainly don't want that here in the support forums…



  • @KOM:

    Whatever you do, don't share your solution because that might help someone else, and we certainly don't want that here in the support forums…

    LOL  8)



  • Using a quick & dirty limiter, if anyones interested :-

    1. Create an upload & download limiter via Firewall -> Traffic Shaper ->Limiters

    2. Create a firewall rule to pass traffic through the interface, Firewall -> Rules -> Interface

    In my case I'm limiting the GUEST Lan to 2 Mbps and they can only access the Internet.

    1. In the above rule that was created goto Advanced Options and add the 2 limiters to the IN / OUT pipe.

    2. View the limiter info via  Diagnostics -> Limiter Info and run a speed test

    Log in to see the screenshots :)

    ![Limiter 1.jpg](/public/imported_attachments/1/Limiter 1.jpg)
    ![Limiter 1.jpg_thumb](/public/imported_attachments/1/Limiter 1.jpg_thumb)
    ![Limiter 2.jpg](/public/imported_attachments/1/Limiter 2.jpg)
    ![Limiter 2.jpg_thumb](/public/imported_attachments/1/Limiter 2.jpg_thumb)
    ![Limiter 3.jpg](/public/imported_attachments/1/Limiter 3.jpg)
    ![Limiter 3.jpg_thumb](/public/imported_attachments/1/Limiter 3.jpg_thumb)
    ![Limiter 4.jpg](/public/imported_attachments/1/Limiter 4.jpg)
    ![Limiter 4.jpg_thumb](/public/imported_attachments/1/Limiter 4.jpg_thumb)
    ![Limiter 5.jpg](/public/imported_attachments/1/Limiter 5.jpg)
    ![Limiter 5.jpg_thumb](/public/imported_attachments/1/Limiter 5.jpg_thumb)


Log in to reply