Limiting NAS Drive connection speed



  • Hi

    On OPT2 I've got one device a NAS on 172.32.10.50

    I've created limiters as:

    NASDown
    15 Mbit/s
    Destination Address

    NASUp
    5 Mbit/s
    Source Address

    I've also setup a schedule of:

    Day(s)
    Mon - Sun

    Start time
    8:00

    Stop time
    23:00

    and assigned that to the limiters, should that only limit the speed every day between 08:00 & 23:00 ?

    I've assigned these to the Up / Down pipe on the rule in OPT2 for 172.32.10.50
    Is that all I need to do to limit this devices speed ?

    Limiters is showing:

    
    00003:  15.000 Mbit/s    0 ms burst 0 
    q131075  50 sl. 0 flows (1 buckets) sched 65539 weight 0 lmax 0 pri 0 droptail
     sched 65539 type FIFO flags 0x1 256 buckets 1 active
        mask:  0x00 0x00000000/0x0000 -> 0xffffffff/0x0000
    BKT Prot ___Source IP/port____ ____Dest. IP/port____ Tot_pkt/bytes Pkt/Byte Drp
     68 ip           0.0.0.0/0       172.32.10.50/0       12     1548  0    0   0
    00004:   5.000 Mbit/s    0 ms burst 0 
    q131076  50 sl. 0 flows (1 buckets) sched 65540 weight 0 lmax 0 pri 0 droptail
     sched 65540 type FIFO flags 0x1 256 buckets 1 active
        mask:  0x00 0xffffffff/0x0000 -> 0x00000000/0x0000
    216 ip     172.32.10.50/0             0.0.0.0/0     4448294 6541232430 39 57447 11875
    
    

    Thanks :)