PPPoE WAN wont auto connect

eblaster101

Hi all,

Really need this fixed as soon as, can offer money to successful fix if that allowed.

Hardware
Vmware 6
1 WAN (block of IPS)
3 Internal LANs with VLAN

The PPPoE does not auto connect if i disconnect it. It went off over night for few hours and never reconnected and not sure why. If i manually connect it everything works fine, no issues.

Have attached pictures, noticed the WAN does not have an adaptor assigned yet it obtains a connection not sure if this has anything to do with it.

Gateway.png_thumb
![interface assignments.png](/public/imported_attachments/1/interface assignments.png)
![interface assignments.png_thumb](/public/imported_attachments/1/interface assignments.png_thumb)
![WAN interface up.png](/public/imported_attachments/1/WAN interface up.png)
![WAN interface up.png_thumb](/public/imported_attachments/1/WAN interface up.png_thumb)
![WAN no Adapter.png](/public/imported_attachments/1/WAN no Adapter.png)
![WAN no Adapter.png_thumb](/public/imported_attachments/1/WAN no Adapter.png_thumb)

eblaster101

Noticed Pfsense WAN remains connected even if i disconnect the WAN modem cable and restart it. Is this normal?

rt050

Your gateway and monitor IPs are the same. If you change the monitor IP to something like google DNS or something you should get a representation of when the gateway is up or down from PF.